Targets required to determine the parameters of the 100Mo(p,xn)99mTc reaction and to estimate the yield of the 99mTc production were prepared starting with powder material. Material, melted with electron beam gun into solid bead, was reshaped into foil mechanically. Targets were prepared by powder melting and hot flattening of the droplet followed by cold rolling. Procedure allowed preparation of thick (in the range of hundreds of microns) and thin (down to 250 nm) foils.
Electrochemical dissolution of pressed into discs and sintered metallic molybdenum powder with the mass of 712 ± 10 mg (n = 15) in potassium hydroxide solution was studied in detail. The technique was considered to apply for dissolution of irradiated 100Mo target in the 99mTc production. The effect of various parameters, e.g., the concentration of the electrolyte solution, temperature, current density, and surface area of the platinum cathode, was investigated. The shortest time for total dissolution of molybdenum target was 70 min. This result was achieved using an electrolyte solution of 5 M KOH, temperature 55 °C and the current density of 365 mA/cm2.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.