Zinc whitlockite (Zn-WH, Ca18Zn2(HPO4)2(PO4)12) is a new synthetic analog of the second most abundant biomineral – magnesium whitlockite (Mg-WH, Ca18Mg2(HPO4)2(PO4)12), which is considered as a potential material for bone regeneration....

No abstract

Strain dependent stabilization of metallic paramagnetic state in epitaxial NdNiO3 thin films Appl. Phys. Lett. 101, 132101 (2012) Tribological properties of nanocrystalline diamond films deposited by hot filament chemical vapor deposition AIP Advances 2, 032164 (2012) The combined effect of surface roughness and internal stresses on nanoindentation tests of polysilicon thin films J. Appl. Phys. 112, 044512 (2012) Mechanism for atmosphere dependence of laser damage morphology in HfO2/SiO2 high reflective films

WO3 photoanodes are widely used in photoelectrochemical catalysis, but typically the as-synthesized material is annealed before application. It is therefore desirable to explore less energy-intensive treatments. In this study, WO3 films of up to 3.9 μm thickness were obtained by galvanostatic anodization of tungsten foil in a neutral-pH Na2SO4 and NaF electrolyte, also containing a NaH2PO2 additive (to suppress O2 accumulation on the pore walls). Additionally, the WO3 photoanodes were modified by applying a cathodic reduction (H+ intercalation) and anodic activation treatment in-situ. XPS spectra revealed that intercalation modifies WO3 films; the amount of W5+-O and O-vacancy bonds was increased. Furthermore, subsequent activation leads to a decrease of the W5+ signal, but the amount of O-vacancy bonds remains elevated. The as-prepared and reduced (intercalated & activated) films were tested as OER photoanodes in acidic 0.1 M Na2SO4 media, under illumination with a 365 nm wavelength LED. It was observed that thinner films generated larger photocurrents. The peculiarities detected by XPS for reduced films correlate well with their improved photocatalytic activity. Photo-electrochemical impedance and intensity modulated photocurrent spectroscopies were combined with steady-state measurements in order to elucidate the effects of H+ intercalation on photoelectrochemical performance. The reduction results in films with enhanced photoexcited charge carrier generation/separation, improved conductivity, and possibly even suppressed bulk recombination. Thus, the intercalation & activation adopted in this study can be reliably used to improve the overall activity of as-synthesized WO3 photoanodes, and particularly of those that are initially poorly photoactive.

No abstract

No abstract

Cadmium tin oxide (CTO) films on glass substrates were synthesized and functionalized by octadecyltrichlorosilane (OTS). CTO films were transparent with the bandgap of 2.92 eV. They exhibited n-type conductivity and carrier concentration of (3.31 ± 0.38) · 1019 cm−3. Weak temperature dependence points out to a nearly degenerative state of the carriers in the CTO films. Silanization by OTS yielded hydrophobic surface with the contact angle values reaching 103 ± 12 degrees. Silanization of films was followed by a significant reduction of the interfacial capacitance, which upon completion of the functionalization reached levels below 3 μF cm−2. The value of the electric capacitance as well as data of ATIR absorption, hints at sparse and disordered coverage of the CTO surface by octadecylalkylsilane molecules. Such organic layer, however, was able to trigger phospholipid (60% dioleoylphosphocholine and 40% cholesterol) vesicle rupture and the formation of a secondary layer of phospholipid, thus rendering hybrid bilayer surface construct. Such hybrid constructs may be useful in applications where electrode coupling to a model biological membranes and membrane bound proteins is required, such as biosensing and photovoltaics.

No abstract