Cellulose nanofibrils (CNFs) are considered next generation, renewable reinforcements for sustainable, high-performance bioinspired nanocomposites uniting high stiffness, strength and toughness. However, the challenges associated with making well-defined CNF/polymer nanopaper hybrid structures with well-controlled polymer properties have so far hampered to deduce a quantitative picture of the mechanical properties space and deformation mechanisms, and limits the ability to tune and control the mechanical properties by rational design criteria. Here, we discuss detailed insights on how the thermo-mechanical properties of tailor-made copolymers govern the tensile properties in bioinspired CNF/polymer settings, hence at high fractions of reinforcements and under nanoconfinement conditions for the polymers. To this end, we synthesize a series of fully water-soluble and nonionic copolymers, whose glass transition temperatures (Tg) are varied from -60 to 130 °C. We demonstrate that well-defined polymer-coated core/shell nanofibrils form at intermediate stages and that well-defined nanopaper structures with tunable nanostructure arise. The systematic correlation between the thermal transitions in the (co)polymers, as well as its fraction, on the mechanical properties and deformation mechanisms of the nanocomposites is underscored by tensile tests, SEM imaging of fracture surfaces and dynamic mechanical analysis. An optimum toughness is obtained for copolymers with a Tg close to the testing temperature, where the soft phase possesses the best combination of high molecular mobility and cohesive strength. New deformation modes are activated for the toughest compositions. Our study establishes quantitative structure/property relationships in CNF/(co)polymer nanopapers and opens the design space for future, rational molecular engineering using reversible supramolecular bonds or covalent cross-linking.
Synthetic mimics of natural high-performance structural materials have shown great and partly unforeseen opportunities for the design of multifunctional materials. For nacre-mimetic nanocomposites, it has remained extraordinarily challenging to make ductile materials with high stretchability at high fractions of reinforcements, which is however of crucial importance for flexible barrier materials. Here, highly ductile and tough nacre-mimetic nanocomposites are presented, by implementing weak, but many hydrogen bonds in a ternary nacre-mimetic system consisting of two polymers (poly(vinyl amine) and poly(vinyl alcohol)) and natural nanoclay (montmorillonite) to provide efficient energy dissipation and slippage at high nanoclay content (50 wt%). Tailored interactions enable exceptional combinations of ductility (close to 50% strain) and toughness (up to 27.5 MJ m ). Extensive stress whitening, a clear sign of high internal dynamics at high internal cohesion, can be observed during mechanical deformation, and the materials can be folded like paper into origami planes without fracture. Overall, the new levels of ductility and toughness are unprecedented in highly reinforced bioinspired nanocomposites and are of critical importance to future applications, e.g., as barrier materials needed for encapsulation and as a printing substrate for flexible organic electronics.
The application of well-defi ned poly(furfuryl glycidyl ether) (PFGE) homopolymers and poly(ethylene oxide)-b -poly(furfuryl glycidyl ether) (PEO-b -PFGE) block copolymers synthesized by living anionic polymerization as self-healing materials is demonstrated. This is achieved by thermo-reversible network formation via (retro) Diels-Alder chemistry between the furan groups in the side-chain of the PFGE segments and a bifunctional maleimide crosslinker within drop-cast polymer fi lms. The process is studied in detail by differential scanning calorimetry (DSC), depth-sensing indentation, and profi lometry. It is shown that such materials are capable of healing complex scratch patterns, also multiple times. Furthermore, microphase separation within PEO-b -PFGE block copolymer fi lms is indicated by small angle X-ray scattering (lamellar morphology with a domain spacing of approximately 19 nm), differential scanning calorimetry, and contact angle measurements.
Amphiphilic star-shaped poly(3-caprolactone)-block-poly(oligo(ethylene glycol)methacrylate) [PCL a -b-POEGMA b ] 4 block copolymers with four arms and varying degrees of polymerization for the core (PCL) and the shell (POEGMA) were used to investigate the solution behavior in dilute aqueous solution using a variety of techniques, including fluorescence and UV/Vis spectroscopy, dynamic light scattering, analytical ultracentrifugation, and isothermal titration calorimetry. Particular emphasis has been applied to prove that the systems form unimolecular micelles for different hydrophilic/lipophilic balances of the employed materials. In vitro cytotoxicity and hemocompatibility have further been investigated to probe the suitability of these structures for in vivo applications. A novel fungicide was included into the hydrophobic core in aqueous media to test their potential as drug delivery systems. After loading, the materials have been shown to release the drug and to provoke therewith an inhibition of the growth of different fungal strains.
We report on the formation of self-supporting, double stimuli-responsive ultrafiltration membranes via the non-solvent-induced phase separation (NIPS) process. The polymers, polystyrene-block-poly(N,N-dimethylaminoethyl methacrylate) (PS-b-PDMAEMA), were synthesized via living anionic polymerization in THF using sec-butyllithium as initiator. Two amphiphilic diblock copolymers were used, S(81)D(19)(75) and S(68)D(32)(100). The membranes were cast from mixtures of THF and DMF. The influence of the solvent composition, the "open-time" before immersion into the coagulation bath, and the casting film thickness onto the membrane morphology were thoroughly investigated, and flux values obtained for the different membrane systems were compared. The higher content in hydrophilic polymer for S(68)D(32)(100) resulted in a better compatibility with the nonsolvent bath consisting of water, leading to a slower precipitation and thus an improved control of the phase separation occurring. Under certain conditions, ordered microphase-separated porous morphologies were observed in parts of the membrane cross-section. Further, the "smart" properties of those novel materials are shown for two representative systems. It could be demonstrated that both stimuli for PDMAEMA, pH and temperature, can be reversibly and independently applied in order to significantly change the transmembrane water flux.
Well‐defined heterotelechelic poly(styrene) carrying thymine/diaminopyridine (DAP) (Mn,SEC = 9300, PDI = 1.04) and Hamilton wedge (HW)/cyanuric acid (CA) (Mn,SEC = 8200, PDI = 1.04) bonding motifs are prepared via a combination of controlled/living radical polymerization and copper catalyzed azide/alkyne “click” chemistry and are subsequently self‐assembled as single chains to emulate—on a simple level—the self‐folding behavior of natural biomacromolecules. Hydrogen nuclear magnetic resonance (1H NMR) in deuterated dichloromethane and dynamic light scattering analyses provides evidence for the hydrogen bonding interactions between the α‐thymine and ω‐DAP as well as α‐CA and ω‐HW chain ends of the heterotelechelic polymers leading to circular entropy driven single chain self‐assembly. This study demonstrates that the choice of NMR solvent is important for obtaining well‐resolved NMR spectra of the self‐assembled structures. In addition, steric effects on the HW can affect the efficiency of the self‐assembly process. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011
We report the synthesis and characterization of welldefined homo-and diblock copolymers containing poly(furfuryl glycidyl ether) (PFGE) via living anionic ring-opening polymerization using different initiators. The obtained materials were characterized by SEC, MALDI-TOF MS, and 1 H NMR spectroscopy and molar masses of up to 9400 g/mol were obtained for PFGE homopolymers. If the amphiphilic diblock copolymer PEG-block-PFGE was dissolved in water, micelles with a PFGE core and a PEG corona were formed. Hereby, the hydrophobic PFGE core domains were used for the incorporation of a suitable bismaleimide and heating to 60 C induced the crosslinking of the micellar core via Diels-Alder chemistry. This process was further shown to be reversible. V C 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 50: [4958][4959][4960][4961][4962][4963][4964][4965] 2012
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.