Abstract:Harvesting solar energy as heat has many applications, such as power generation, residential water heating, desalination, distillation and wastewater treatment. However, the solar flux is diffuse, and often requires optical concentration, a costly component, to generate high temperatures needed for some of these applications. Here we demonstrate a floating solar receiver capable of generating 100°C steam under ambient air conditions without optical concentration. The high temperatures are achieved by using thermal concentration and heat localization, which reduce the convective, conductive, and radiative heat losses. This demonstration of a low-cost and scalable solar vapor generator holds the promise of significantly expanding the application domain and reducing the cost of solar thermal systems. Keywords: solar thermal, steam generation, thermal concentration, water treatmentThe sun is a promising and abundant source of renewable energy that can potentially solve many of society's challenges. Solar thermal technologies, i.e., the conversion of the sunlight to thermal energy, are being developed for many applications such as power generation, domestic water heating, desalination, and other industrial processes. [1][2][3][4][5][6][7] Steam and vapor generation is often desired in these applications, but the dilute solar flux (1000 W/m 2 ) does not provide enough power per unit area of the absorber to reach the required high temperatures and to compensate for the large latent heat of water vaporization. Optical

With its light weight, low cost and high efficiency even at low operation frequency, the triboelectric nanogenerator is considered a potential solution for self-powered sensor networks and large-scale renewable blue energy. As an energy harvester, its output power density and efficiency are dictated by the triboelectric charge density. Here we report a method for increasing the triboelectric charge density by coupling surface polarization from triboelectrification and hysteretic dielectric polarization from ferroelectric material in vacuum (P ~ 10−6 torr). Without the constraint of air breakdown, a triboelectric charge density of 1003 µC m−2, which is close to the limit of dielectric breakdown, is attained. Our findings establish an optimization methodology for triboelectric nanogenerators and enable their more promising usage in applications ranging from powering electronic devices to harvesting large-scale blue energy.

For the environmental energy-enhanced interfacial solar vapor generator, through elegant structural designs, there will be a net energy gain from the environment during the solar vapor generation, yielding an evaporation rate exceeding the theoretical value, assuming a 100% solar-to-vapor energy transfer efficiency.

Tactile/touch sensing is essential in developing human-machine interfacing and electronic skins for areas such as automation, security, and medical care. Here, we report a self-powered triboelectric sensor based on flexible thin-film materials. It relies on contact electrification to generate a voltage signal in response to a physical contact without using an external power supply. Enabled by the unique sensing mechanism and surface modification by polymer-nanowires, the triboelectric sensor shows an exceptional pressure sensitivity of 44 mV/Pa (0.09% Pa(-1)) and a maximum touch sensitivity of 1.1 V/Pa (2.3% Pa(-1)) in the extremely low-pressure region (<0.15 KPa). Through integration of the sensor with a signal-processing circuit, a complete tactile sensing system is further developed. Diverse applications of the system are demonstrated, explicitly indicating a variety of immediate uses in human-electronics interface, automatic control, surveillance, remote operation, and security systems.

Early detection has the potential to reduce cancer mortality, but an effective screening test must demonstrate asymptomatic cancer detection years before conventional diagnosis in a longitudinal study. In the Taizhou Longitudinal Study (TZL), 123,115 healthy subjects provided plasma samples for long-term storage and were then monitored for cancer occurrence. Here we report the preliminary results of PanSeer, a noninvasive blood test based on circulating tumor DNA methylation, on TZL plasma samples from 605 asymptomatic individuals, 191 of whom were later diagnosed with stomach, esophageal, colorectal, lung or liver cancer within four years of blood draw. We also assay plasma samples from an additional 223 cancer patients, plus 200 primary tumor and normal tissues. We show that PanSeer detects five common types of cancer in 88% (95% CI: 80-93%) of post-diagnosis patients with a specificity of 96% (95% CI: 93-98%), We also demonstrate that PanSeer detects cancer in 95% (95% CI: 89-98%) of asymptomatic individuals who were later diagnosed, though future longitudinal studies are required to confirm this result. These results demonstrate that cancer can be non-invasively detected up to four years before current standard of care.

Traditional solar-thermal receivers suffer from high surface temperatures, which increase heat losses to the surroundings. To improve performance, volumetric receivers based on nanoparticles suspended in liquid (nanofluids) have been studied as an approach to reduce surface losses by localizing high temperatures to the interior of the receiver. Here, we report measured vapor generation efficiencies of 69% at solar concentrations of 10 suns using graphitized carbon black, carbon black, and graphenesuspended in water, representing a significant improvement in both transient and steady-state performance over previously reported results. To elucidate the vapor generation mechanism and validate our experimental results, we develop numerical and analytical heat transfer models that suggest that nanofluid heating and vapor generation occur due to classical global heating of the suspension fluid. This work demonstrates highnanofluid-assisted vapor generation efficiencies with potential applications in power generation, distillation, and sterilization.

For the emerging amphibian genetic model Xenopus tropicalis targeted gene disruption is dependent on zinc-finger nucleases (ZFNs) or transcription activator-like effector nucleases (TALENs), which require either complex design and selection or laborious construction. Thus, easy and efficient genome editing tools are still highly desirable for this species. Here, we report that RNA-guided Cas9 nuclease resulted in precise targeted gene disruption in all ten X. tropicalis genes that we analyzed, with efficiencies above 45% and readily up to 100%. Systematic point mutation analyses in two loci revealed that perfect matches between the spacer and the protospacer sequences proximal to the protospacer adjacent motif (PAM) were essential for Cas9 to cleave the target sites in the X. tropicalis genome. Further study showed that the Cas9 system could serve as an efficient tool for multiplexed genome engineering in Xenopus embryos. Analysis of the disruption of two genes, ptf1a/p48 and tyrosinase, indicated that Cas9-mediated gene targeting can facilitate direct phenotypic assessment in X. tropicalis embryos. Finally, five founder frogs from targeting of either elastase-T1, elastase-T2 or tyrosinase showed highly efficient transmission of targeted mutations into F1 embryos. Together, our data demonstrate that the Cas9 system is an easy, efficient and reliable tool for multiplex genome editing in X. tropicalis.

No abstract