Recently, wearable and flexible pressure sensors have sparked tremendous research interest, and considerable applications including human activity monitoring, biomedical research, and artificial intelligence interaction are reported. However, the large-scale preparation of low-cost, high-sensitivity piezoresistive sensors still face huge challenges. Inspired by the specific structures and excellent metal conductivity of a family of two-dimensional (2D) transition-metal carbides and nitrides (MXene) and the high-performance sensing effect of human skin including randomly distributed microstructural receptors, we fabricate a highly sensitive MXene-based piezoresistive sensor with bioinspired microspinous microstructures formed by a simple abrasive paper stencil printing process. The obtained piezoresistive sensor shows high sensitivity (151.4 kPa −1 ), relatively short response time (<130 ms), subtle pressure detection limit of 4.4 Pa, and excellent cycle stability over 10,000 cycles. The mechanism of the high sensitivity of the sensor is dynamically revealed from the structural perspective by means of in situ electron microscopy experiment and finite element simulation. Bioinspired microspinous microstructures can effectively improve the sensitivity of the pressure sensor and the limit of the detectable subtle pressure. In practice, the sensor shows great performance in monitoring human physiological signals, detecting quantitatively pressure distributions, and remote monitoring of intelligent robot motion in real time.

The MIT Joint Program on the Science and Policy of Global Change is an organization for research, independent policy analysis, and public education in global environmental change. It seeks to provide leadership in understanding scientific, economic, and ecological aspects of this difficult issue, and combining them into policy assessments that serve the needs of ongoing national and international discussions. To this end, the Program brings together an interdisciplinary group from two established research centers at MIT: the Center for Global Change Science (CGCS) and the Center for Energy and Environmental Policy Research (CEEPR). These two centers bridge many key areas of the needed intellectual work, and additional essential areas are covered by other MIT departments, by collaboration with the Ecosystems Center of the Marine Biology Laboratory (MBL) at Woods Hole, and by short-and long-term visitors to the Program. The Program involves sponsorship and active participation by industry, government, and non-profit organizations. To inform processes of policy development and implementation, climate change research needs to focus on improving the prediction of those variables that are most relevant to economic, social, and environmental effects. In turn, the greenhouse gas and atmospheric aerosol assumptions underlying climate analysis need to be related to the economic, technological, and political forces that drive emissions, and to the results of international agreements and mitigation. Further, assessments of possible societal and ecosystem impacts, and analysis of mitigation strategies, need to be based on realistic evaluation of the uncertainties of climate science. This report is one of a series intended to communicate research results and improve public understanding of climate issues, thereby contributing to informed debate about the climate issue, the uncertainties, and the economic and social implications of policy alternatives. Titles in the Report Series to date are listed on the inside back cover.

The MIT Joint Program on the Science and Policy of Global Change combines cutting-edge scientific research with independent policy analysis to provide a solid foundation for the public and private decisions needed to mitigate and adapt to unavoidable global environmental changes. Being data-driven, the Program uses extensive Earth system and economic data and models to produce quantitative analysis and predictions of the risks of climate change and the challenges of limiting human influence on the environment-essential knowledge for the international dialogue toward a global response to climate change. To this end, the Program brings together an interdisciplinary group from two established MIT research centers: the Center for Global Change Science (CGCS) and the Center for Energy and Environmental Policy Research (CEEPR). These two centers-along with collaborators from the Marine Biology Laboratory (MBL) at Woods Hole and short-and longterm visitors-provide the united vision needed to solve global challenges. At the heart of much of the Program's work lies MIT's Integrated Global System Model. Through this integrated model, the Program seeks to: discover new interactions among natural and human climate system components; objectively assess uncertainty in economic and climate projections; critically and quantitatively analyze environmental management and policy proposals; understand complex connections among the many forces that will shape our future; and improve methods to model, monitor and verify greenhouse gas emissions and climatic impacts. This reprint is one of a series intended to communicate research results and improve public understanding of global environment and energy challenges, thereby contributing to informed debate about climate change and the economic and social implications of policy alternatives.

The MIT Joint Program on the Science and Policy of Global Change is an organization for research, independent policy analysis, and public education in global environmental change. It seeks to provide leadership in understanding scientific, economic, and ecological aspects of this difficult issue, and combining them into policy assessments that serve the needs of ongoing national and international discussions. To this end, the Program brings together an interdisciplinary group from two established research centers at MIT: the Center for Global Change Science (CGCS) and the Center for Energy and Environmental Policy Research (CEEPR). These two centers bridge many key areas of the needed intellectual work, and additional essential areas are covered by other MIT departments, by collaboration with the Ecosystems Center of the Marine Biology Laboratory (MBL) at Woods Hole, and by short-and long-term visitors to the Program. The Program involves sponsorship and active participation by industry, government, and non-profit organizations.To inform processes of policy development and implementation, climate change research needs to focus on improving the prediction of those variables that are most relevant to economic, social, and environmental effects. In turn, the greenhouse gas and atmospheric aerosol assumptions underlying climate analysis need to be related to the economic, technological, and political forces that drive emissions, and to the results of international agreements and mitigation. Further, assessments of possible societal and ecosystem impacts, and analysis of mitigation strategies, need to be based on realistic evaluation of the uncertainties of climate science.This report is one of a series intended to communicate research results and improve public understanding of climate issues, thereby contributing to informed debate about the climate issue, the uncertainties, and the economic and social implications of policy alternatives. Titles in the Report Series to date are listed on the inside back cover. AbstractWe calculate CO 2 emissions embodied in China's net exports using a multi-regional input-output database. We find that the majority of China's export-embodied CO 2 is associated with production of machinery and equipment rather than energy-intensive products, such as steel and aluminum. In 2007, the largest net recipients of embodied CO 2 emissions from China include the EU (360 million metric tons, mmt), the U.S. (337 mmt), and Japan (109 mmt). Overall, annual CO 2 emissions embodied in China's net exports totaled 1,177 mmt, equal to 22% of China's total CO 2 emissions. We also develop a global general equilibrium model with a detailed treatment of energy and CO 2 emissions. We use the model to analyze the impact of a sectoral shift in the Chinese economy away from industry and towards services, both without and with a decrease in China's trade surplus, and a tax on energy-intensive exports, which reflect policy objectives in China's Twelfth Five-Year Plan (2011-2015. We find that without a decrease...

Cylindrical microlens arrays (CMLAs) play a key role in many optoelectronic devices, and 100% fill-factor CMLAs also have the advantage of improving the signal-to-noise ratio and avoiding stray-light effects. However, the existing preparation technologies are complicated and costly, which are not suitable for mass production. Herein, we propose a simple, efficient, and lowcost manufacturing method for CMLAs with a high fill-factor via the electric-field-driven (EFD) microscale 3D printing of polydimethylsiloxane (PDMS). By adjusting the printing parameters, the profile and the fill-factor of the CMLAs can be controlled to improve their optical performance. The optical performance test results show that the printed PDMS CMLAs have good imageprojecting and light-diffraction properties. Using the two printing modes of this EFD microscale 3D-printing technology, a cylindrical dual-microlens array with a double-focusing function is simply prepared. At the same time, we print a series of specially shaped microlenses, proving the flexible manufacturing capabilities of this technology. The results show that the prepared CMLAs have good morphology and optical properties. The proposed method may provide a viable route for manufacturing large-area CMLAs with 100% fill-factor in a very simple, efficient, and low-cost manner.

No abstract

No abstract

No abstract