Superlubricity of graphite and graphene has aroused increasing interest in recent years. Yet how to obtain a long-lasting superlubricity between graphene layers, under high applied normal load in ambient atmosphere still remains a challenge but is highly desirable. Here, we report a direct measurement of sliding friction between graphene and graphene, and graphene and hexagonal boron nitride (h-BN) under high contact pressures by employing graphene-coated microsphere (GMS) probe prepared by metal-catalyst-free chemical vapour deposition. The exceptionally low and robust friction coefficient of 0.003 is accomplished under local asperity contact pressure up to 1 GPa, at arbitrary relative surface rotation angles, which is insensitive to relative humidity up to 51% RH. This ultralow friction is attributed to the sustainable overall incommensurability due to the multi-asperity contact covered with randomly oriented graphene nanograins. This realization of microscale superlubricity can be extended to the sliding between a variety of two-dimensional (2D) layers.
Natural vascular plants leaves rely on differences in osmotic pressure, transpiration and guttation to produce tons of clean water, powered by sunlight. Inspired by this, we report a sunlight-driven purifier for high-efficiency water purification and production. This sunlight-driven purifier is characterized by a negative temperature response poly(N-isopropylacrylamide) hydrogel (PN) anchored onto a superhydrophilic melamine foam skeleton, and a layer of PNIPAm modified graphene (PG) filter membrane coated outside. Molecular dynamics simulation and experimental results show that the superhydrophilicity of the relatively rigid melamine skeleton significantly accelerates the swelling/deswelling rate of the PNPG-F purifier. Under one sun, this rational engineered structure offers a collection of 4.2 kg m
−2
h
−1
and an ionic rejection of > 99% for a single PNPG-F from brine feed via the cooperation of transpiration and guttation. We envision that such a high-efficiency sunlight driven system could have great potential applications in diverse water treatments.
Topographic nanomanufacturing with a depth precision down to atomic dimension is of importance for advancement of nanoelectronics with new functionalities. Here we demonstrate a mask-less and chemical-free nanolithography process for regio-specific removal of atomic layers on a single crystalline silicon surface via shear-induced mechanochemical reactions. Since chemical reactions involve only the topmost atomic layer exposed at the interface, the removal of a single atomic layer is possible and the crystalline lattice beneath the processed area remains intact without subsurface structural damages. Molecular dynamics simulations depict the atom-by-atom removal process, where the first atomic layer is removed preferentially through the formation and dissociation of interfacial bridge bonds. Based on the parametric thresholds needed for single atomic layer removal, the critical energy barrier for water-assisted mechanochemical dissociation of Si–Si bonds was determined. The mechanochemical nanolithography method demonstrated here could be extended to nanofabrication of other crystalline materials.
Graphene and other two-dimensional materials have been proved to be able to offer low friction. Here we assembled van der Waals heterostructures with graphene and molybdenum disulphide monolayers. The Raman spectrum together with a modified linear chain model indicate a two-orders-of-magnitude decrease in the interlayer lateral force constant, as compared with their homogeneous bilayers, indicating a possible routine to achieve superlubricity. The decrease in the interlayer lateral force constant is consistent with the ultrasmall potential energy corrugation during sliding, which is derived from density functional theory calculations. The potential energy corrugation is found to be determined by the sliding-induced interfacial charge density fluctuation, suggesting a new perspective to understand the physical origin of the atomic scale friction of two-dimensional materials.
Interlayer friction between the atomic planes of 2D materials and heterostructures is a promising probe of the physics in their interlayer couplings and superlubricity. However, it is still challenging to measure the interlayer friction between well-defined 2D layers. We propose an approach of thermally assisted mechanical exfoliation and transfer to fabricate various 2D flake-wrapped atomic force microscopy (AFM) tips and to directly measure the interlayer friction between 2D flakes in single-crystalline contact. First, superlubricity between different 2D flakes and layered bulk materials is achieved with a friction coefficient as low as 10. The rotation angle dependence of superlubricity is observed for friction between graphite layers, whereas it is not observed between graphite and h-BN because of the incommensurate contact of the mismatched lattices. Second, the interlayer lateral force map between ReS layers is measured with atomic resolution, showing hexagonal patterns, as further verified by theoretical simulations. The tribological system constructed here offers an experimental platform to study interlayer couplings and friction between 2D flakes and layered bulk materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.