Slotted Bolted Connections (SBCs) are modified bolted connections designed to dissipate energy through friction during rectilinear tension and compression loading cycles. Experimental results on two types of SBCs are reported. In one type, friction occurs between clean mill scale steel surfaces; in the other, friction is between clean mill scale steel and brass surfaces. The behavior of connections with brass on steel frictional surfaces is found to be more uniform and simpler to model analytically than that with steel on steel surfaces. These connections maintain essentially constant slip force, and unlike those with steel on steel surfaces, require minimal overstrength of the system in design. The frictional mechanisms giving rise to the observed behavior are explained. As an example of application a one story diagonally braced frame was designed and its behavior determined for four different earthquakes. Experimental results are presented for the fabricated SBC for this frame subjected consecutively to the four displacement histories derived from these earthquakes. The agreement between the analytical and experimental results is found to be excellent. Because of the intrinsic simplicity of the SBCs and their very low cost, their use in seismic design and retrofit applications appears to be very promising.
There are three abnormally high porosity zones developed in buried Paleogene nearshore subaqueous fan and sublacustrine fan clastic reservoirs at 2,800-3,200 m, 3,250-3,700 m and 3,900-4,400 m, respectively, within the Shengtuo area of the Dongying Sag. Here the porosity of reservoirs buried deeper than 4,000 m can still be greater than 20%. Investigation of these three abnormally high porosity (AHP) zones in the 3 rd to 4 th analysis, core physical property testing and other technical methods. The results show that, the AHP primary intergranular pores (more than 50% of the total porosity), while secondary pores and micropores in authigenic clays may develop in some reservoirs. AHP reservoirs in the AHP zone of 3,900-4,400 m are dominated by micropores in matrix, visible pores are mainly grain dissolution pores but with low absolute content (< 1%), so this zone belongs to the micropores primary AHP zone. The genesis of the three AHP zones was studied to distinguish between porosity enhancement and porosity preservation. Our research shows that, in deeply buried clastic reservoirs in the Shengtuo area, mineral dissolution occurred in a relatively closed diagenetic system with high temperature and high salinity. Reservoir rocks underwent extensive feldspar dissolution, while detrital carbonate grains and carbonate cements show dissolution enhanced porosity only a little due to the precipitation of almost isovolumetric dissolution products in the nearby primary intergranular pores in forms of authigenic clays and quartz cements. Net enhanced porosity originating from feldspar dissolution is generally less than 0.25%. Thus, the subsurface dissolution has little impact on the mid-deep buried high porosity reservoirs. Reservoirs in braided channels of middle fans in sublacustrine fans and reservoirs in the middle-front of fan bodies of nearshore overpressure and early hydrocarbon emplacement have effectively retarded compaction and carbonate are the main controlling factors in the development of AHP zones.unexpectedly high porosity and permeability at substantial burial depth. Studies on the origin and distribution of these high-quality abnormally high porosity (AHP) reservoirs are of great importance for oil-gas exploration and production. is statistically higher than the porosity values occurring in typical sandstone reservoirs of a given lithology (composition and texture), age and burial/temperature history. In sandstones containing abnormally high porosities, such porosities
Terahertz radiation from longitudinal optical (LO) phonon–plasmon coupling modes in InSb films is observed using an ultrafast photoconductive antenna detector. We demonstrate a response frequency of up to 7 THz for a low-temperature-grown GaAs-based photoconductive antenna gated with 25 fs laser pulses. It is found that the emission frequencies of the coupling modes are dependent only on the residual carrier density, not on the excitation carrier density. It is also found that the LO phonon–plasmon oscillations in semiconductors can serve as an efficient THz source.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.