Facility layout problem is associated with the arrangement of facilities in a plant. It is a critical issue in the early stages of designing a manufacturing system because it affects the total manufacturing cost significantly. Dynamic and robust layouts are flexible enough to cope with fluctuations and uncertainties in product demands in volatile environment of flexible manufacturing systems. Since the facility layout is a hard combinatorial optimization problem, intelligent approaches are the most appropriate methods for solving the large size of this problem in reasonable computational time. In this paper, first of all, dynamic and robust layouts are surveyed. After a quick look of different mathematical models, including quadratic assignment, quadratic set covering, mixed integer programming, and graph theoretic models, the various solution methods especially intelligent approaches along with their advantages and disadvantages are surveyed. Finally, after review of hybrid algorithms, the conclusion of this paper is reported.

SUMMARY There is a high demand for developing effective controllers to perform fast and accurate operations for either flexible link manipulators (FLMs) or rigid link manipulators (RLMs). Thus, this paper is beneficial for such vast field, and it is also advantageous and indispensable for researchers who are interested in robotics to have sufficient knowledge about various controllers of FLMs and RLMs as the controllers’ concepts are elaborated in detail. The paper concentrates in critically reviewing classical controllers, intelligent controllers, robust controllers, and hybrid controllers for both FLMs and RLMs. The advantages and disadvantages of the aforementioned control methods are summarized in this paper; it also has a detailed comparison for the controllers in terms of the design difficulty, performance, and the suitability for controlling FLMs or RLMs.

Design of a robust production facility layout with minimum handling cost (MHC) presents an appropriate approach to tackle facility layout problems in a dynamic volatile environment, in which product demands randomly change in each planning period. The objective of the design is to find the robust facility layout with minimum total material handling cost over the entire multiperiod planning horizon. This paper proposes a new mathematical model for designing robust machine layout in the stochastic dynamic environment of manufacturing systems using quadratic assignment problem (QAP) formulation. In this investigation, product demands are assumed to be normally distributed random variables with known expected value, variance, and covariance that randomly change from period to period. The proposed model was verified and validated using randomly generated numerical data and benchmark examples. The effect of dependent product demands and varying interest rate on the total cost function of the proposed model has also been investigated. Sensitivity analysis on the proposed model has been performed. Dynamic programming and simulated annealing optimization algorithms were used in solving the modeled example problems.

Mathematical modelling plays an important role for robotic manipulators in order to design their particular controllers. Also, it is hard challenge to obtain an accurate mathematical model or obtain a suitable modelling method in such vast field. Thus, this critical review is advantageous and indispensable for researchers who are interested in the area to gain fruitful knowledge on the mathematical modelling methods. This paper is classified based on the type of robotic manipulators such as flexible link manipulators (FLMs), rigid link manipulators (RLMs) and hybrid manipulators which involves rigid links and flexible links. The used modelling methods for FLMs are the assumed mode method, the finite element method, and the lumped parameter method as approximation techniques which are well explained and reviewed. The Lagrangian method has inclusive explanation and review which is widely participated for obtaining the dynamic equations of FLMs, and it is appropriate and commonly employed for modelling RLMs. The Newtonian method, the forward kinematic, and the inverse kinematic are also well discussed and reviewed which are suitable and commonly employed for modelling RLMs. The critical discussion of 170 articles reported in this paper guides researchers to select the suitable method for modelling. This paper reviews the published articles in the period of 2010-2020 except for few older articles for the need of providing essential theoretical knowledge. The advantages and disadvantages of each method are well summarized at the end of the paper. The intelligent identification methods are briefly discussed due to the lack of publications especially on the period of 2010-2020.

No abstract

Background Due to the high demand of robots to perform several industrial tasks, such as welding, machining, pick and place, position control in robotics has attracted high attention recently. Controllers’ improvement is also continuous specifically in terms of design simplicity and performance accuracy. This research plans to obtain the SimMechanics model of a two-degree of freedom (DOF) robot and to propose an integrated controller of a proportional–derivative (PD) controller and a fuzzy logic (FL) controller. Methodology The SimMechanics model of the 2-DOF robot is obtained using MATLAB SimMechanics toolbox from a CAD assembly design of the 2-DOF robot. Then, the proposed PD-FL integrated controller is designed and simulated in MATLAB Simulink. The PD controller is widely used for its simplicity, but it doesn’t have a satisfactory performance in difficult tasks. Furthermore, the FL controller is also easy for design and implementation even by non-experts in control theory, but it has the disadvantage of long computational time for multi-input systems due to the increased fuzzy rules. Results The FL controller is integrated with the PD controller for enhanced performance of the 2-DOF robot. The PD-FL integrated controller is developed and tested to control the 2-DOF robot for point-to-point position control and also tip trajectory tracking (TTT) such as triangular TTT and rhombic TTT. Conclusion The PD-FL integrated controller demonstrates enhanced performance compared to the conventional PD controller in both point-to-point position control and TTT. Furthermore, the PD-FL integrated controller has the advantage of less fuzzy rules which helps to overcome the computational time issue of the FL controller.

Background Due to the high demand of robots to perform several industrial tasks, such as welding, machining, pick and place, position control in robotics has attracted high attention recently. Controllers’ improvement is also continuous specifically in terms of design simplicity and performance accuracy. This research plans to obtain the SimMechanics model of a two-degree of freedom (DOF) robot and to propose an integrated controller of a proportional–derivative (PD) controller and a fuzzy logic (FL) controller. Methodology The SimMechanics model of the 2-DOF robot is obtained using MATLAB SimMechanics toolbox from a CAD assembly design of the 2-DOF robot. Then, the proposed PD-FL integrated controller is designed and simulated in MATLAB Simulink. The PD controller is widely used for its simplicity, but it doesn’t have a satisfactory performance in difficult tasks. Furthermore, the FL controller is also easy for design and implementation even by non-experts in control theory, but it has the disadvantage of long computational time for multi-input systems due to the increased fuzzy rules. Results The FL controller is integrated with the PD controller for enhanced performance of the 2-DOF robot. The PD-FL integrated controller is developed and tested to control the 2-DOF robot for point-to-point position control and also tip trajectory tracking (TTT) such as triangular TTT and rhombic TTT. Conclusion The PD-FL integrated controller demonstrates enhanced performance compared to the conventional PD controller in both point-to-point position control and TTT. Furthermore, the PD-FL integrated controller has the advantage of less fuzzy rules which helps to overcome the computational time issue of the FL controller.