Life cycle assessment (LCA) is commonly applied to examine the environmental performance of waste management systems. The system boundaries are, however, often limited to either one tonne of material or to specific waste treatments and are, therefore, lacking a systems perspective. Here, a framework is proposed to assess complete waste management systems based on actual waste flows, assessed with a detailed material flow analysis (MFA) in a modular MFA/LCA approach. The transformation of the MFA into a product-process-matrix facilitates a direct link between MFA and LCA, therefore allowing for the assessment of variations in flows. To allow for an up-to-date and geographically specific assessment, 190 LCA modules were set up based on primary industrial data and the ecoinvent database. The LCA modules show where there have been improvements in different recycling processes over the past years (e.g. for paper recycling) and highlight that, from an environmental perspective, closed-loop recycling is not always preferable to open-loop recycling. In a case study, the Swiss municipal solid waste management system, of which there is already a detailed MFA, was modeled using the new LCA modules and applying the modular MFA/LCA approach. Five different mass flow distribution scenarios for the Swiss municipal solid waste management system were assessed to show the environmental impact of political measures and to test the sensitivity of the results to key parameters. The results of the case study highlight the importance of the dominant fractions in the overall environmental impacts assessment; while the metal fraction has the highest impact on a per kilogram basis, paper, cardboard, glass and mixed municipal solid waste were found to dominate the environmental impacts of the Swiss waste management systems due to their mass. The scenarios also highlight the importance of the energy efficiency of municipal solid waste incineration plants and the credits from material substitution as key variables. In countries with advanced waste management systems such as Switzerland, there is limited improvement potential with further increases in recycling rates. In these cases, the focus of political measures should be laid on (i) the utilization of secondary materials in applications where they replace high-impact primary production, and (ii) an increased recovery of energy in waste-to-energy plants.
To allow for an up-to-date and geographically specific life cycle assessment, updated and regionally specific life cycle inventories are crucial. This data article present up-to-date life cycle inventories of several collection, sorting and recycling processes of municipal solid waste fractions for life cycle assessments of waste management systems. In total, 190 life cycle inventories for processes within municipal solid waste management were either newly developed or adapted from existing datasets. The data for 51 recycling processes has been collected to update existing processes or create new process models. Two modules for biogenic processes were taken from literature and 10 processes were modeled based on the existing ecoinvent processes with minor adjustments [1]. The substitution of 36 materials from recycling processes was modeled. In addition, the thermal treatment of 12 waste fractions was modeled within 84 life cycle inventories compromising the thermal waste treatment and the recovery and recycling of recovered fractions from fly and bottom ash. The assumptions and the modelling of the waste treatment processes are described. All life cycle inventory datasets which were newly created, updated or modified compared to the original dataset are described and provided as Excel table. The data are associated with the research article "Modular Life Cycle Assessment of Municipal Solid Waste Management” [2].
Summary Many existing methods for sustainable technical product design focus on environmental efficiency while lacking a framework for a holistic, sustainable design approach that includes combined social, technical, economic, and environmental aspects in the whole product life cycle, and that provides guidance on a technical product development level. This research proposes a framework for sustainable technical product design in the case of skis. We developed a ski under the Grown brand, benchmarked according to social, environmental, economic, and technical targets, following an initial sustainability assessment, and delivered the first environmental life cycle assessment (ELCA) and the first social life cycle assessment (SLCA) of skis. The framework applies a virtual development process as a combination of ELCA to calculate the environmental footprint as carbon equivalents of all materials and processes and a technical computer‐aided design (CAD) and computer‐aided engineering (CAE) simulation and virtual optimization using parameter studies for the nearly prototype‐free development of the benchmarked skis. The feedback loops between life cycle assessment (LCA) and virtual simulation led to the elimination of highly energy intensive materials, to the pioneering use of basalt fibers in skis, to the optimization of the use of natural materials using protective coatings from natural resins, and to the optimization of the production process. From an environmental perspective, a minimum 32% reduction in carbon equivalent emissions of materials in relation to other comparably performing skis has been achieved, as well as a pioneering step forward toward transparent communication of the environmental performance by the individual, comparable, and first published ski carbon footprint per volume unit.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.