No abstract

No abstract

No abstract

Polyvinyl butyral is used in safety glass interlayers, mainly in car windshields. Legislative regulations require a recycling of cars after their lifetime and therefore also their safety glass. This causes the availability of recycled polyvinyl butyrate (r-PVB) originated from safety glass interlayers. Due to deteriorated optical properties, such as the transparency, and unknown amounts of plasticizers, it is challenging to reuse the recycled material in new windshields. Therefore, it is of particular interest to find new fields of application for r-PVB, such as the usage as a textile coating. In this research, r-PVB was investigated as a material for yarn coating. Polyester and polyamide mono- and multifilament yarns were coated continuously with solely a polymer dispersion and with mixtures of crosslinking agent and polymer dispersion. Crosslinked r-PVB coatings showed enhanced properties toward abrasion and chemical resistance. Coatings without the crosslinking agent showed a diminished abrasion resistance and could be washed off with ethanol. Mechanical properties of the monofilaments were influenced by the r-PVB coating in general. However, varying concentrations of the crosslinking agent did not affect the mechanical properties.

Alternating current–driven electroluminescent devices on polyester fabrics were realized using a combination of coating and printing. The PEDOT:PSS front electrode was coated onto the fabric using knife coating. All other layers were digitally printed using a specially modified three-dimensional printer and three-dimensional printing software. Slicing parameters (line distance, printing speed, printing pattern) as well as other hardware parameters and ink viscosity were evaluated for each ink to obtain a good print. Final results show a complex interaction of all investigated parameters. Fully digitally printed electroluminescent devices show a luminescence of 44 lx, but combinations of digital printing and knife coating show a much higher luminescence of up to 128 lx for samples with an even smaller luminous layer thickness.

A treatment for hydrophobic functionalization of natural fiber materials is developed. This hydrophobic treatment is based mainly on natural products. As hydrophobic component the natural Tung Oil is used, which is originally a compound used for wood conservation purposes. The application on textile is done in a padding process under presence of an oxidative agent. For the current investigations a fiber felt from linen was used. The hydrophobic effect is determined by the concentration of Tung Oil and the duration of a thermal drying process. The hydrophobic effect is investigated by capillary rise tests and contact angle measurements. Scanning electron microscopy SEM is used to investigate the surface topography of the fiber material and the deposited hydrophobic material. Altogether, an interesting and promising method for hydrophobisation of natural fibers is developed, which could especially be used as part of a production process of a fiber reinforced composite material, mainly based on natural products.

This review supports an overview of selected high-performance fibers and functional fiber materials. A review of several properties and applications is given. For fiber materials and fabrics, microscopic images taken by scanning electron microscopy (SEM) are presented. As well as this, electron dispersive spectroscopy (EDS) is performed on the fiber materials and an overview of EDS spectra is presented. The features of SEM images and EDS spectra are discussed, especially with the aim of supporting people who are working in the field of fiber analytics. To support a complete view of both analytic methods—SEM and EDS—challenges and typical mistakes for SEM measurements on textiles are also described. Altogether, this review supports a useful overview of interesting high technology fiber materials and their investigation using the analytical methods SEM and EDS. Using these, material properties and their composition are presented and discussed. The composition of industrial fiber materials is investigated and discussed, as well as fiber treatments for the realization of functional fiber properties. Furthermore, it aims to support a helpful tool for fiber and textile analytics and identification.

No abstract