The preparation of polypropylene (PP) nanocomposites was studied using clay and three types of modified PP (m-PP) as compatibilizers: diethyl maleate grafted PP (PP-g-DEM), maleic anhydride grafted PP (PP-g-MA), and PP grafted with carbamyl maleamic acid (PP-g-UMA). The clay was made organophylic by an acid treatment with octadecylamine. PP functionalization and blending were carried out in an internal mixer. Blends of PP containing 20 and 40 wt% each of the modified PP and 5 wt% of organophilic clay (IMt), in each case, were prepared. Samples were characterized by transmission electron microscopy (TEM), differential scanning calorimetry (DSC), optical microscopy, and mechanical testing. The presence of tactoid, intercalated and exfoliated structures was observed by TEM in all the samples containing clay and modified PP, which also showed improved mechanical properties with tensile modulus as much as three times that of PP. Melting temperature did not vary significantly with the addition of clay. However, because of the clay's nucleating effect, an increase in the crystallization temperature was observed, accompanied by a slight decrease in the degree of crystallinity. The best results were obtained when PP-g-MA was used as the compatibilizer; intermediate results were obtained with the use of PP-g-UMA, followed by the results obtained when PP-g-DEM was used. Property enhancements were obtained when a higher percentage of modified PP was employed. POLYM. COMPOS., 27:451-460,
2006.
Milled particles from a (SiO2-CaO-Fe2O3) glass were smoothed by flame spraying, focusing on the elimination of superficial roughness or angularity without reaching complete fusion of the glass. The purpose of this study is the further application to glass ceramic microspheres where avoiding thermal resetting of the second phase is needed. Finite element modeling of the thermal and kinematical history of glass particles throughout the flame was performed in order to predict the suitable size range of injected particles. Crushed and sieved glass powders were sprayed into oxyacetylenic flame and characterized by SEM, showing the importance of the diameter and anisotropic morphology of angular feedstock when discriminating between superficial smoothing and complete fusion in the glass.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.