A wireless body area sensor network (WBASN) consists of a coordinator and multiple sensors to monitor the biological signals and functions of the human body. This exciting area has motivated new research and standardization processes, especially in the area of WBASN performance and reliability. In scenarios of mobility or overlapped WBASNs, system performance will be significantly degraded because of unstable signal integrity. Hence, it is necessary to consider interference mitigation in the design. This survey presents a comparative review of interference mitigation schemes in WBASNs. Further, we show that current solutions are limited in reaching satisfactory performance, and thus, more advanced solutions should be developed in the future.

Underwater wireless sensor networks are currently seeing broad research in various applications for human benefits. Large numbers of sensor nodes are being deployed in rivers and oceans to monitor the underwater environment. In the paper, we propose an energy-efficient clustering multi-hop routing protocol (EECMR) which can balance the energy consumption of these nodes and increase their network lifetime. The network area is divided into layers with regard to the depth level. The data sensed by the nodes are transmitted to a sink via a multi-hop routing path. The cluster head is selected according to the depth of the node and its residual energy. To transmit data from the node to the sink, the cluster head aggregates the data packet of all cluster members and then forwards them to the upper layer of the sink node. The simulation results show that EECMR is effective in terms of network lifetime and the nodes’ energy consumption.

Herein, we propose a hybrid multi-channel medium access control (HM-MAC) protocol for wireless body area networks (WBANs) that mitigates inter-WBAN interference significantly. In HM-MAC, a superframe consists of a random access phase and a scheduled access phase. That is, a carrier sensing multiple access with collision avoidance (CSMA/CA) phase and a time division multiple access (TDMA) phase are included in a superframe. The random access phase allows higher-priority users to transmit data packets with low latency and high reliability. The retransmission of data packets is also performed in the random access phase. The periodic data are transmitted in the scheduled phase, resulting in no contention and high reliability. A channel selection algorithm is also proposed to avoid collision between neighboring WBANs. The HM-MAC protocol allows multiple transmissions simultaneously on different channels, resulting in high throughput and low collision. The sensor nodes update idle channels by listening to the beacon signal; consequently, the sensor nodes can change the working channel to reduce inter-WBAN interference. According to our simulation results, HM-MAC achieves a higher packet delivery ratio and higher throughput with lower energy consumption than the conventional scheme in multi-WBAN scenarios. HM-MAC also causes lower end-to-end delays for higher-priority users.

Network connectivity is a key issue in wireless sensor networks (WSNs). Nodes have to establish and maintain a connected topology in a WSN while dealing with interference and packet loss. Topology control techniques allow the network nodes to reduce their transmission power while preserving the network connectivity. In this paper, we present a reinforcement-learning-based communication range control (RL-CRC) algorithm to adaptively adjust the communication range at each sensor node while ensuring the network connectivity in dynamic WSNs. In the proposed RL-CRC, the reinforcement learning is exploited to discover neighbors with low interference, and the network topology is effectively obtained in presence of interference. The reinforcement learning based on the so-called Q-learning adapts to changes of node connectivity and, thus, the nodes discover their neighbors and then adaptively control their communication range accordingly. The simulation results show that RL-CRC reduces energy consumption significantly compared to the conventional schemes while maintaining almost the same average communication range and node degree.

Currently, wireless body area networks (WBANs) are effectively used for health monitoring services. However, in cases where WBANs are densely deployed, interference among WBANs can cause serious degradation of network performance and reliability. Inter-WBAN interference can be reduced by scheduling the communication links of interfering WBANs. In this paper, we propose an interference-aware traffic-priority-based link scheduling (ITLS) algorithm to overcome inter-WBAN interference in densely deployed WBANs. First, we model a network with multiple WBANs as an interference graph where node-level interference and traffic priority are taken into account. Second, we formulate link scheduling for multiple WBANs as an optimization model where the objective is to maximize the throughput of the entire network while ensuring the traffic priority of sensor nodes. Finally, we propose the ITLS algorithm for multiple WBANs on the basis of the optimization model. High spatial reuse is also achieved in the proposed ITLS algorithm. The proposed ITLS achieves high spatial reuse while considering traffic priority, packet length, and the number of interfered sensor nodes. Our simulation results show that the proposed ITLS significantly increases spatial reuse and network throughput with lower delay by mitigating inter-WBAN interference.