pH sensitivity of emeraldine salt polyaniline (ES-PANI) and poly(vinyl butyral) (PVB) blend film was investigated. This blend film can be used as a pH sensing element in new-type pH sensors to replace traditional instruments based on fragile glass electrodes for pH measurement of water in aquaculture farming. Structural and optical characteristic of PANI were studied by Fourier transform infrared spectroscopy (FTIR) and ultraviolet visible spectroscopy (UV-vis). Electrical characterization of ES-PANI:PVB blend films versus pH was performed with chemiresistors fabricated by micro-lithography. A ES-PANI:PVB layer was drop-coated on comb-shaped platinum electrodes patterned on SiO 2 /Si substrates. Scanning electron microscope (SEM) and optical microscope were used to investigate morphology of the fabricated platinum electrodes and the coated polymer blend films. I-V measurements of the polymer-coated chemiresistors were performed at very low relative humidity after the polymer films were exposed to pH 1-8. The results showed that logarithm of electrical resistance of the ES-PANI:PVB films increased almost linearly as pH increased from 1 to 8. The initial results showed that the PANI blend-coated chemiresistors can be used as pH sensors for water quality monitoring.
The photocatalytic BiFeO3 perovskite nanoparticles were fabricated by gel combustion method using polyvinyl alcohol and corresponding metal nitrate precursors under the optimum mild conditions such as pH 2, gel formation temperature of 80 °C, metal/polyvinyl alcohol molar ratio of 1/3, metal molar ratio Bi/Fe of 1/1 and calcination temperature at 500 °C for 2 h. The prepared sample was characterized by x-ray diffraction, field scanning electron microscopy, transmission electron microscopy, Brunauer–Emmetl–Teller nitrogen adsorption method at 77 K, energy dispersive x-ray spectroscopy, ultraviolet-visible light spectrophotometry, and thermal analysis. The effects of molar ratios of starting material and calcination temperature on phase formation and morphology were investigated. The degradation of methylene blue, methylene orange and some toxic organic compounds such as phenol and diazinon under visible light irradiation by photocatalytic BiFeO3 nanoparticles were evaluated at different parameters and conditions such as the light intensity determined from the light source to the measured sample, the addition H2O2, reaction time and the regeneration performance. Obtained results showed that the synthesized perovskite BiFeO3 nanoparticles for the optimized sample have a size smaller than 50 nm and the high mean surface area of 50 m2 g−1. Degradation efficiency was almost 90.0% for methylene blue and 80.0% for methylene orange with added H2O2 after 30 min of reaction. After the 3rd time of regeneration, the BiFeO3 nanoparticles still have 92.8% of the degradation performance for removing methylene blue. Phenol and diazinon toxic compound were degraded with the performance of 92.42% and 85.7%, respectively, for 150 min
Polyurethane (PU) coating degrades quickly under the irradiation of ultraviolet (UV). Thus, increasing the durability of the coating is necessary. In this study, porous CeO2-SiO2 nanocomposites (CS-NCs) were used to disperse into the PU matrix. The CS-NCs were prepared by a sol-gel combustion method using polyvinyl alcohol as precursors. Prepared nanocomposites were characterized by x-ray diffraction (XRD) analysis, Fourier transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) as well as Energy dispersive x-ray (EDX) mapping analysis. Next, the prepared nanocomposites were employed for the preparation of PU coatings. The loading of nanoparticles was varied between 0.1% and 2.0%. These coating properties were investigated by using FTIR and UV–vis spectroscopy. As also in this study, these coatings were subjected to UV exposure with accelerated weather testing. The structural changes were characterized by applying FTIR analysis and measuring gloss and color deviation. The results indicate that incorporating nanocomposites into the polymer matrix improves the UV-durable properties of the PU matrix.
Nanocapsule composites of C/Ce-co-doped ZnO supported on graphene synthesized by a one-pot hydrothermal method with a band gap of 2.72 eV were used to enhance the photodegradation of methylene blue under various conditions.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.