Electrodeposition of CuAg alloy films from plating baths containing 3,5-diamino-1,2,4-triazole (DAT) as an inhibitor yields high surface area catalysts for the active and selective electroreduction of CO to multicarbon hydrocarbons and oxygenates. EXAFS shows the co-deposited alloy film to be homogeneously mixed. The alloy film containing 6% Ag exhibits the best CO electroreduction performance, with the Faradaic efficiency for CH and CHOH production reaching nearly 60 and 25%, respectively, at a cathode potential of just -0.7 V vs RHE and a total current density of ∼ - 300 mA/cm. Such high levels of selectivity at high activity and low applied potential are the highest reported to date. In situ Raman and electroanalysis studies suggest the origin of the high selectivity toward C products to be a combined effect of the enhanced stabilization of the CuO overlayer and the optimal availability of the CO intermediate due to the Ag incorporated in the alloy.

Electrodeposition from plating baths containing 3,5-diamino-1,2,4-triazole (DAT) as an inhibitor gives Cu films exhibiting high surface area and high CO2 reduction activities. By changes in the pH and deposition current density, the morphologies of the Cu films are varied to exhibit wire, dot, and amorphous structures. Among these Cu films, the CuDAT-wire samples exhibit the best CO2 reduction activities activity with a Faradaic efficiency (FE) for C2H4 product formation reaching 40% at −0.5 V vs RHE, a FE for C2H5OH formation reaching 20% at −0.5 V vs RHE, and a mass activity for CO2 reduction at −0.7 V vs RHE of ∼700 A/g.

Electrodeposition of Ni or NiFe films exhibiting fractal-like behavior from plating baths containing an inhibitor, such as 3,5-diamino-1,2,4-triazole (DAT), is found to yield oxygen evolution reaction (OER) catalysts for alkaline solutions exhibiting high current densities (100 mA/cm2), high mass activity (∼1200 A/g of catalyst), high stability (>72 h), and low overpotentials (∼300 mV). By changing electrodeposition time, the activity of the catalyst can be tuned, with longer times yielding higher activities. The electrodeposition method works with any conductive substrate yielding unprecedented performance and providing an easy route to high activity catalysts.

Earth-abundant and inexpensive catalysts with low overpotential and high durability are central to the development of efficient water splitting electrolyzers. However, improvements in catalyst design and preparation are currently hampered by the lack of detailed understanding of the reaction mechanisms of the oxygen evolution reaction (OER) facilitated by non-precious metal (NPM) catalysts. In this manuscript, we conducted a kinetic isotope effect (KIE) study in an effort to identify the rate-determining step (RDS) of these intricate electrocatalytic reactions involving multiple proton-coupled electron transfer (PCET) processes. We observed an inverse KIE for OER catalyzed by Ni and Co electrodes. These results contribute to a more complete understanding of the OER mechanism and allow for the future development of improved NPM catalysts.

The development of non-precious-metal (NPM) catalysts to replace the Pt alloys currently used in fuel cells to facilitate the oxygen reduction reaction (ORR) is a vital step in the widespread utilization of fuel cells. Currently, the ORR mechanism for NPM catalysts is not well understood, prohibiting the design and preparation of improved NPM catalysts. We conducted a kinetic isotope effect (KIE) study to identify the rate-determining step (RDS) of this intricate electrocatalytic reaction involving multiple proton-coupled electron transfer (PCET) processes. We observed a KIE of about 2 for the ORR catalyzed by a NPM catalyst, which demonstrates that for these electrocatalysts protons are involved in the RDS during ORR. These results contribute to a more complete understanding of the ORR mechanism and suggest that the design of future NPM catalysts must include careful consideration of the role of protons during ORR.

In situ electrochemical stress measurements are used to interrogate changes in oxide structure before and during the oxygen evolution reaction (OER) from Ir, Ni, Co, Au, and Pt electrodes in alkaline electrolyte. Stress evolution during potential cycling reports on changes in oxidation state and oxide forms. Hysteresis observed in the potential-dependent stress from Ir, Au, and Pt electrodes is associated with chemical irreversibility in electrode composition and roughness. Alternatively, Ni and Co exhibit reversible conversion between hydroxide and oxyhydroxide forms during cycling. From the experimentally determined stress, charge passed during electrode oxidation, and Young's modulus, the change in strain exhibited by Ni and Co electrodes during hydroxide-oxyhydroxide conversion is calculated to be 7.0% and 8.4%, respectively. We also show that the magnitude of change in stress is proportional to the amount of material that is further oxidized.

Microcantilever stress measurements are examined to contrast and compare their attributes with those from in situ X-ray absorption spectroscopy to elucidate bonding dynamics during the oxygen reduction reaction (ORR) on a Pt catalyst. The present work explores multiple atomistic catalyst properties that notably include features of the Pt-Pt bonding and changes in bond strains that occur upon exposure to O2 in the electrochemical environment. The alteration of the Pt electronic and physical structures due to O2 exposure occurs over a wide potential range (1.2 to 0.4 V vs normal hydrogen electrode), a range spanning potentials where Pt catalyzes the ORR to those where Pt-oxide forms and all ORR activity ceases. We show that Pt-Pt surface bond strains due to oxygen interactions with Pt-Pt bonds are discernible at macroscopic scales in cantilever-based bending measurements of Pt thin films under O2 and Ar. Complementary extended X-ray absorption fine structure (EXAFS) measurements of nanoscale Pt clusters supported on carbon provide an estimate of the magnitude and direction of the in-operando bond strains. The data show that under O2 the M-M bonds elongate as compared to an N2 atmosphere across a broad range of potentials and ORR rates, an interfacial bond expansion that falls within a range of 0.23 (±0.15)% to 0.40 (±0.20)%. The EXAFS-measured Pt-Pt bond strains correspond to a stress thickness and magnitude that is well matched to the predictions of a mechanics mode applied to experimentally determined data obtained via the cantilever bending method. The data provide new quantitative understandings of bonding dynamics that will need to be considered in theoretical treatments of ORR catalysis and substantiate the subpicometer resolution of electrochemically mediated bond strains detected on the macroscale.

No abstract