Disposal of waste from water treatment plant is one of the major issues most treatment plants seem not to overcome due to the constant generation of this waste as a result of meeting the demand of water and purification of water for human consumption. The effect of disposing sludge constantly in the environment has called for an economical and sustainable way of reusing alum sludge. However, this paper aimed at reviewing the possible literature on applying waste from water treatment plant in various ways, example; in building material; as brick and tiles, in concrete ; as replacement of cement and aggregate, in Geotechnics; as soil stabilizer and in agriculture; as soil fertilizer, in pottery; use as replacement of clay in flower pot production for sustainable disposal. All the above mentioned categories of uses have reviled an effective and efficient way in managing waste from water treatment plant (alum sludge), also a safer and economical manner of disposal. However, the effects when used and the behaviour when it is incorporated with other materials were highlighted, other reuse and disposal options where discussed and the areas not covered (knowledge gap) was identified.
The study has conducted to determine the workability and compressive strength of the self –compacting concrete. The sand has replaced with quarry dust with the proportion of 10, 20, 30 and 40% and super plasticizer was added 0.9%. The experiments were carried out at the Infrastructure University Kuala Lumpur (IUKL) concrete laboratory. Slump flow, J- Ring tests were carried out to determine the workability of self-compacting concrete and compressive strength test was conducted on 7 days and 28th days of curing period. A finding of the study shows that workability and compressive strength has increased by addition of quarry dust. It is concluded that addition of quarry dust up to 30% improve the workability of the self-compacting concrete and further addition of quarry dust decrease the workability. Additionally, compressive strength of the quarry dust modified self-compacting concrete shows the trend of higher compressive strength up to 30% addition of quarry dust with sand replacement and further addition decrease the compressive strength.
Schmidt rebound hammer test was employed in this study as a nondestructive test. This test method has been universally utilized due to its non-destructiveness for quick and easy assessment of material strength properties and quality of concrete of an existing structure. Industrial waste materials (air-dried alum sludge, treated alum sludge, limestone dust and quarry dust) were employed as replacement material for fine aggregates in this study. A normal strength concrete was designed to achieve 35 MPa at 28 days, with industrial waste materials replacing fine aggregate at different percentages (0%, 5%, 10% and 15%), and then cured for 7, 28 and 180 days. The compressive strength values and rebound numbers for all the mixes obtained were correlated, and a regression equation was established between compressive strength and Schmidt rebound number. The correlation result showed an excellent relationship between rebound number and compressive strength of concrete produced in this study at all curing ages, with correlation coefficients of R2 = 0.98, R2 = 0.99 and R2 = 0.98. The predicted equation showed a strong relationship with the experimental compressive strength. Therefore, it can be used for the prediction of compressive strength of concrete with industrial waste as a replacement for fine aggregate.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.