We present a slope-assisted BOTDA system based on the vector stimulated Brillouin scattering (SBS) and frequency-agile technique (FAT) for the wide-strain-range dynamic measurement. A dimensionless coefficient K defined as the ratio of Brillouin phase-shift to gain is employed to demodulate the strain of the fiber, and it is immune to the power fluctuation of pump pulse and has a linear relation of the frequency detuning for the continuous pump and Stokes waves. For a 30ns-square pump pulse, the available frequency span of the K spectrum can reach up to 200MHz, which is larger than fourfold of 48MHz-linewidth of Brillouin gain spectrum. For a single-slope assisted BOTDA, dynamic strain measurement with the maximum strain of 2467.4με and the vibration frequency components of 10.44Hz and 20.94Hz is obtained. For a multi-slope-assisted BOTDA, dynamic measurement with the strain variation up to 5372.9με and the vibration frequency components of 5.58Hz and 11.14Hz is achieved by using FAT to extend the strain range.

A temperature-compensated distributed hydrostatic pressure sensor based on Brillouin dynamic gratings (BDGs) is proposed and demonstrated experimentally for the first time, to the best of our knowledge. The principle is to measure the hydrostatic pressure induced birefringence changes through exciting and probing the BDGs in a thin-diameter pure silica polarization-maintaining photonic crystal fiber. The temperature cross-talk to the hydrostatic pressure sensing can be compensated through measuring the temperature-induced Brillouin frequency shift (BFS) changes using Brillouin optical time-domain analysis. A distributed measurement of hydrostatic pressure is demonstrated experimentally using a 4-m sensing fiber, which has a high sensitivity, with a maximum measurement error less than 0.03 MPa at a 20-cm spatial resolution.

We propose and demonstrate an ultrahigh-resolution optical spectrometry based on Brillouin dynamic gratings (BDGs). Taking advantage of creating a long grating in an optical fiber, an ultra-narrow bandwidth optical filter is realized by operating a BDG in a long single-mode fiber (SMF), and the optical spectrometry is performed by sweeping the center wavelength of the BDG-based filter through a swept-tuned laser. The BDG-based optical spectrometry features ultrahigh resolution, large wavelength coverage, and a simple direction-detection scheme. In the experiment, a 4 fm (0.5 MHz) spectral resolution is achieved by operating a BDG in a 400 m SMF, and the wavelength coverage can be readily extended to C+L bands with a commercial tunable laser.

We demonstrate a high-spatial-resolution fast Brillouin optical time-domain analysis (BOTDA) for distributed dynamic strain measurement based on differential doublepulse and second-order sideband of modulation. The frequency-agility probe wave is obtained from the second-order sideband of the modulated light by using the microwave signal from a wideband arbitrary waveform generator (AWG), which reduces the bandwidth requirement of the AWG by half to $5.5 GHz. The differential double-pulse scheme is proposed to improve the spatial resolution while keeping the capability of dynamic measurement. In experiment, a spatial resolution of 20 cm is achieved by using a 52/50 ns differential double-pulse, and the distributed vibration measurement is demonstrated over a 50-m Panda polarization-maintaining fiber observing the vibration frequency of up to 50 Hz. With only five averages, the standard deviation of the strain accuracy is measured to be 14 ".

Brillouin-based optical fiber sensing has been regarded as a good distributed measurement tool for the modern large geometrical structure and the industrial facilities because it can demodulate the distributed environment information (e.g., temperature and strain) along the sensing fiber. Brillouin optical time domain analysis (BOTDA), which is an excellent and attractive scheme, has been widely developed thanks to its high performance in a signal-to-noise ratio, a spatial resolution, and sensing distance. However, the sampling rate of the classical BOTDA is severely limited by several factors (especially the serially frequency-sweeping process) so that it cannot be suitable for the quickly distributed measurement. In this work, we summarize some promising breakthroughs about the fast BOTDA, which can be named as an optical frequency comb technique, an optical frequency-agile technique, a slope-assisted technique, and an optical chirp chain technique.