A method was developed in which cellulose (CEL) and/or chitosan (CS) were added to keratin (KER) to enable [CEL/CS+KER] composites to have better mechanical strength and wider utilization. Butylmethylimmidazolium chloride ([BMIm+Cl–]), an ionic liquid, was used as the sole solvent, and because the [BMIm+Cl–] used was recovered, the method is green and recyclable. Fourier transform infrared spectroscopy results confirm that KER, CS, and CEL remain chemically intact in the composites. Tensile strength results expectedly show that adding CEL or CS into KER substantially increases the mechanical strength of the composites. We found that CEL, CS, and KER can encapsulate drugs such as ciprofloxacin (CPX) and then release the drug either as a single or as two- or three-component composites. Interestingly, release rates of CPX by CEL and CS either as a single or as [CEL+CS] composite are faster and independent of concentration of CS and CEL. Conversely, the release rate by KER is much slower, and when incorporated into CEL, CS, or CEL+CS, it substantially slows the rate as well. Furthermore, the reducing rate was found to correlate with the concentration of KER in the composites. KER, a protein, is known to have secondary structure, whereas CEL and CS exist only in random form. This makes KER structurally denser than CEL and CS; hence, KER releases the drug slower than CEL and CS. The results clearly indicate that drug release can be controlled and adjusted at any rate by judiciously selecting the concentration of KER in the composites. Furthermore, the fact that the [CEL+CS+KER] composite has combined properties of its components, namely, superior mechanical strength (CEL), hemostasis and bactericide (CS), and controlled drug release (KER), indicates that this novel composite can be used in ways which hitherto were not possible, e.g., as a high-performance bandage to treat chronic and ulcerous wounds.

A method was developed in which cellulose (CEL) and/or chitosan (CS) were added to keratin (KER) to enable [CEL/CS+KER] composites formed to have better mechanical strength and wider utilization. Butylmethylimmidazolium chloride ([BMIm+Cl−]), an ionic liquid, was used as the sole solvent, and because the majority of [BMIm+Cl−] used (at least 88%) was recovered, the method is green and recyclable. FTIR, XRD, 13C CP-MAS NMR and SEM results confirm that KER, CS and CEL remain chemically intact and distributed homogeneously in the composites. We successfully demonstrate that the widely used method based on the deconvolution of the FTIR bands of amide bonds to determine secondary structure of proteins is relatively subjective as the conformation obtained is strongly dependent on the choice of parameters selected for curve fitting. A new method, based on the partial least squares regression analysis (PLSR) of the amide bands, was developed, and proven to be objective and can provide more accurate information. Results obtained with this method agree well with those by XRD, namely they indicate that although KER retains its second structure when incorporated into the [CEL+CS] composites, it has relatively lower α-helix, higher β-turn and random form compared to that of the KER in native wool. It seems that during dissolution by [BMIm+Cl−], the inter- and intramolecular forces in KER were broken thereby destroying its secondary structure. During regeneration, these interactions were reestablished to reform partially the secondary structure. However, in the presence of either CEL or CS, the chains seem to prefer the extended form thereby hindering reformation of the α-helix. Consequently, the KER in these matrices may adopt structures with lower content of α-helix and higher β-sheet. As anticipated, results of tensile strength and TGA confirm that adding CEL or CS into KER substantially increase the mechanical strength and thermal stability of the [CS/CEL+KER] composites.

Novel composites were synthesized from keratin (KER), cellulose (CEL) and chitosan (CS). The method is recyclable because majority (>88%) of [BMIm+Cl−], an ionic liquid (IL), used as the sole solvent, was recovered for reuse. Experimentally, it was confirmed that unique properties of each component remain intact in the composites, namely bactericide (from KER and CS) and anti-inflammatory property (from KER). Specifically, the composites were examined for their anti-inflammatory influence on macrophages. The cells were imaged and immunophenotyped to determine the quantity using the macrophage marker CD11b. The 75:25 [KER+CS] composite was found to have the least amount of CD11b macrophages compared to other composites. Bactericidal assays indicated that all composites, except the 25:75 [KER+CS], substantially reduce the growth of organisms such as vancomycin resistant Enterococcus (VRE) and Eschericia coli. The results clearly indicate that the composites possess all properties needed for effective use as a wound dressing.

We have developed a simple one-step method to synthesize novel supramolecular polysaccharide composites from cellulose (CEL), chitosan (CS) and benzo-15-crown 5 (B15C5). Butylmethylimidazolium chloride [BMIm+Cl−], an ionic liquid (IL), was used as a sole solvent for dissolution and preparation of the composites. Since majority of [BMIm+Cl−] used was recovered for reuse, the method is recyclable. The [CEL/CS + B15C5] composites obtained retain properties of their components, namely superior mechanical strength (from CEL), excellent adsorption capability for heavy metal ions and organic pollutants (from B15C5 and CS). More importantly, the [CEL/CS + B15C5] composites exhibit truly supramolecular properties. By itself CS, CEL and B15C5 can effectively adsorb Cd2+, Zn2+ and 2,4,5-trichlorophenol. However, adsorption capability of the composite was substantially and synergistically enhanced by adding B15C5 to either CEL and/or CS. That is, the adsorption capacity (qe values) for Cd2+ and Zn2+ by [CS + B15C5], [CEL + B15C5] and [CEL + CS + B15C5] composites are much higher than combined qe values of individual CS, CEL and B15C5 composites. It seems that B15C5 synergistically interact with CS (or CEL) to form more stable complexes with Cd2+ (or Zn2+), and as a consequence, the [CS + B15C5] (or the [CEL + B15C5]) composite can adsorb relatively larger amount Cd2+ (or Zn2+). Moreover, the pollutants adsorbed on the composites can be quantitatively desorbed to enable the [CS + CEL + B15C5] composites to be reused with similar adsorption efficiency.

Hydroxyapatite (HAp) is often used as a bone-implant material because it is biocompatible and osteoconductive. However, HAp possesses poor rheological properties and it is inactive against disease-causing microbes. To improve these properties, we developed a green method to synthesize multifunctional composites containing: (1) cellulose (CEL) to impart mechanical strength; (2) chitosan (CS) to induce antibacterial activity thereby maintaining a microbe-free wound site; and (3) HAp. In this method, CS and CEL were co-dissolved in an ionic liquid (IL) and then regenerated from water. HAp was subsequently formed in situ by alternately soaking [CEL+CS] composites in aqueous solutions of CaCl2 and Na2HPO4. At least 88% of IL used was recovered for reuse by distilling the aqueous washings of [CEL+CS]. The composites were characterized using FTIR, XRD and SEM. These composites retained the desirable properties of their constituents. For example, the tensile strength of the composites was enhanced 1.9X by increasing CEL loading from 20% to 80%. Incorporating CS in the composites resulted in composites which inhibited the growth of both Gram positive (MRSA, S. aureus and VRE) and Gram negative (E. coli and P. aeruginosa) bacteria. These findings highlight the potential use of [CEL+CS+HAp] composites as scaffolds in bone tissue engineering.