As Earth’s fossil energy resources are limited, there is a growing need for renewable resources such as biodiesel. That is the reason why the social, economic and environmental impacts of biofuels became an important research topic in the last decade. Depleted stocks of crude oil and the significant level of environmental pollution encourage researchers and professionals to seek and find solutions. The study aims to analyze the economic and sustainability issues of biodiesel production by a systematic literature review. During this process, 53 relevant studies were analyzed out of 13,069 identified articles. Every study agrees that there are several concerns about the first-generation technology; however, further generations cannot be price-competitive at this moment due to the immature technology and high production costs. However, there are promising alternatives, such as wastewater-based microalgae with up to 70% oil content, fat, oils and grease (FOG), when production cost is below 799 USD/gallon, and municipal solid waste-volatile fatty acids technology, where the raw material is free. Proper management of the co-products (mainly glycerol) is essential, especially at the currently low petroleum prices (0.29 USD/L), which can only be handled by the biorefineries. Sustainability is sometimes translated as cost efficiency, but the complex interpretation is becoming more common. Common elements of sustainability are environmental and social, as well as economic, issues.

Overpopulation and climate change are among the greatest challenges the world faces. Climate-smart agriculture (CSA) provides an adequate answer by aiming for higher productivity, resilience, as well as GHG emission reduction. As small-scale farms are the cornerstone of the agricultural sector, especially in developing countries, their greater involvement in climate-related actions is essential. CSA practices seek a higher and more stable income sustainably. This systematic literature review aims to provide an overview of how CSA is realized on small-scale farms, what the major CSA practices applied are, and what factors motivate and hamper higher CSA adoption. Based on 30 selected articles, the major message of the literature is a case/site-specific approach due to the tremendous heterogeneity of small-scale farms. As agricultural production is characterized by high risks and low returns, small-scale farmers must consider the length of the payback period when they decide on any CSA practices. This is the reason smallholdings, who implement any CSA practices, must achieve economic benefits, otherwise, they need to be compensated for providing environmental benefits. Moreover, simpler methods with low labor intensity are often applied. Access to the different financial instruments and inputs, knowledge/education/information, and land use security are the critical factors of the CSA adoption. Furthermore, it is worth mentioning that, unlike off-farm activities/incomes, full-time farming is a serious commitment that positively influences CSA adoption.

Being competitive in the international agri-food trade is an important aim of every country. It should be noted that this term has neither a commonly accepted definition nor a synthetized index to quantify it. The most commonly used indices in the international literature are the Balassa index and its modified versions (revealed trade advantage, revealed competitiveness, normalized revealed comparative advantage, and revealed symmetric comparative advantage) and different export and/or import-related indices (e.g., the Grubel–Lloyd index or the trade balance index). Based on a systematic review of the literature, these measurements were identified along with the major factors suggested for higher agri-food trade competitiveness. It seems that supportive legislation and/or (trade) policy is the most crucial factor, followed by higher value-added/more sophisticated goods, and high, efficient, and profitable production. Although the EU and its member states were overrepresented in the analyzed literature, the candidate countries, as well as other important trading partners of the EU, e.g., Canada, China, or the ASEAN countries, were also analyzed. Thus, some of these findings may be generalized.

Agricultural production systems are a composite of philosophy, adoptability, and careful analysis of risks and rewards. The two dominant typologies include conventional and organics, while biotechnology (GM) and Integrated Pest Management (IPM) represent situational modifiers. We conducted a systematic review to weigh the economic merits—as well as intangibles through an economic lens—of each standalone system and system plus modifier, where applicable. Overall, 17,485 articles were found between ScienceDirect and Google Scholar, with 213 initially screened based on putative relevance. Of those, 82 were selected for an in-depth analysis, with 63 ultimately used. Economically, organic generally outperformed conventional systems. This is largely due to their lower production costs and higher market price. However, organic farms face lower yields, especially in the fruit, vegetable, and animal husbandry sectors. With that said, organic farming can provide significant local environmental benefits. Integrated pest management (IPM) is a potentiator of either core system. As a risk reduction and decision-making framework, it is labor intensive. However, this can be offset by input reductions without yield penalty compared to a conventional baseline. Biotechnology is a rapidly emerging production system, notably in developing countries. The use of GM crops results in lower production cost and higher yields. As a conventional modifier, its major advantage is scale-neutrality. Thus, smaller and lower income farmers may achieve higher gross margin. The main source of environmental benefits is reduced pesticide use, which implies a decreased need for fuel and labor. Barring external influences such as subsidies and participation in prescriptive labeling programs, farmers should focus on an a la carte approach (as opposed to discrete system adoption) to optimize their respective enterprises.

The agri-food industry faces a great challenge due to the growing global population. When considering land scarcity, this can be solved only by a higher production efficiency. Precision agriculture (PA) provides a potential answer. Most farms, especially in developing countries, are small-scale units that have difficulties in applying precision agriculture technologies. On the basis of the systematically selected articles, major benefits and constraints were identified, and solutions were provided. Due to the low economic performance of smallholdings, (demonstrated) economic benefits are essential; however, it should be added that PA also provides potential environmental benefits. The five main constraints of precision agriculture technologies at the small-scale level are small land size, high cost of adoption, technology-related difficulties, lack of professional support and lack of supporting policy. The solutions provided by the literature are various, including, among others, joint/collective actions, zone delineation/field boundary detection, cooperation-cooperatives; low-cost technology, common machinery usage; education, (common) knowledge, use of standards, simple and user-friendly technology; professional support of vendors, advisors, agricultural contractor services; and policy-initiated investments and adequate regulations, respectively. Lower cost, modular technologies can help to accelerate PA uptake.

The paper aims to analyse the comparative advantage patterns of agriculture in the Commonwealth of Independent States. It is relatively understudied in the literature, especially in Central Asia. Agriculture still plays an important role in the region but in a different way than before. Despite that, the majority of the CIS countries are net food importers. Based on the revealed comparative advantage (RCA) index, country-level analysis shows that Moldova, Kyrgyzstan and Armenia have the highest Balassa indices in the region, and Belarus, Ukraine and Azerbaijan are also having some comparative advantage. Product level analysis pointed out that the region's major agricultural export products groups are cereals. It is important to emphasise that the top five product groups have high, between 3.0-4.4, RCA values. It implies that the regional trade structure is consistent with comparative advantages. However, stability and duration tests show that these are not persistent, since survival chances fell appreciably from

Crises impact every sector of the economy; however, the magnitude of that impact varies between the different sectors. The agri-food sector-related lessons learned from the last two crises (global financial crisis in 2008, and the sanctions against Russia in 2014) are that international trade becomes lower and commodity prices rise. This article analyzes the performance of the Hungarian agri-food sector during the last three crises based on international and Hungarian datasets. The results show that impacts depend on many factors, such as the type of the agri-food products (raw material vs. processed product, perishable vs. non-perishable goods, etc.) or the depth of trade integration. It should be noted that Hungary is heavily integrated into the EU’s common market, its major trade partners are the other member states. At the commodity level, the share of raw materials is higher on the export side (e.g. cereals) compared to the import side (e.g. meat products). Based on the results, the impacts of the COVID-19 pandemic were different from the two previous crises. Despite the difficulties in transport, Hungarian exportation expanded and resulted in an increasing trade surplus, while international commodity prices remained stable. The identification of the different impacts of the coronavirus compared to the other two crises is the major finding of the article. Doi: 10.28991/HIJ-2021-02-03-02 Full Text: PDF

The study gives an overview of raw materials and biofuel generation, markets, production, and regulation. The major aim of this study was to reveal the impacts of biofuel production on international commodity trade. According to the results of the country-level regressions, the export of corn and sugar cane have generally negatively impacted ethanol production. This effect was positive at the global level which indicates that some of the imported raw materials are used for ethanol production. Although the explanatory power of the models was relatively high (from 0.35 (EU) to 0.94 (USA)), none of models proved to be significant, even at the 10% level. These values were higher for the biodiesel models (from 0.53 (USA) to 0.97 (Brazil)) and the EU model results were significant at the 5% level. The export of raw materials had a positive impact on biodiesel production. This implies that some part of the biodiesel was produced from the imported raw materials. The export of processed products (different oils) had a negative impact on biodiesel production, as they are normally used for other purposes.