Nanomaterials-based sensors are in demand for early-stage disease detection as a diagnostic tool. Here, we prepare a non-enzymatic electrochemical sensor using hydrothermally synthesized nano-berries shaped cobalt oxide (Co3O4) nanostructures on...

Electrolyte-gated transistor (EGT)-based biosensors are created with nanomaterials to harness the advantages of miniaturization and excellent sensing performance. A cholesterol EGT biosensor based on iron oxide (Fe2O3) nanoparticles decorated ZnO nanorods is proposed here. ZnO nanorods are directly grown on the seeded channel using a hydrothermal method, keeping in mind the stability of nanorods on the channel during biosensor measurements in an electrolyte. Most importantly, ZnO nanorods can be effectively grown and modified with Fe2O3 nanoparticles to enhance stability, surface roughness, and performance. The cholesterol oxidase (ChOx) enzyme is immobilized over Fe2O3 nanoparticles decorated ZnO nanorods for cholesterol detection. With cholesterol addition in buffer solution, the electro-oxidation of cholesterol on enzyme immobilized surface led to increased the biosensor’s current response. The cholesterol EGT biosensor detected cholesterol in wide-linear range (i.e., 0.1 to 60.0 mM) with high sensitivity (37.34 µA/mMcm2) compared to conventional electrochemical sensors. Furthermore, we obtained excellent selectivity, fabrication reproducibility, long-term storage stability, and practical applicability in real serum samples. The demonstrated EGT biosensor can be extended with changing enzymes or nanomaterials or hybrid nanomaterials for specific analyte detection.

Nanomaterial-based biosensors are a promising fit for portable and field-deployable diagnosis sensor devices due to their mass production, miniaturization, and integration capabilities. However, the fabrication of highly stable and reproducible biosensor devices is challenging. In this work, we grow a vertically oriented architecture of zinc oxide nanorods onto the active working area (i.e., the channel between the source and drain) of a field-effect transistor (FET) using a low-temperature hydrothermal method. The glucose oxidase enzyme was immobilized on the zinc oxide nanorod surface by a physical adsorption method to fabricate the electrolyte-gated FET-based glucose biosensor. The electrical properties of the electrolyte-gated FET biosensor were measured with different glucose concentrations. We found a linear increase in current up to 80 mM glucose concentration with high sensitivity (74.78 μA/mMcm2) and a low detection limit (∼0.05 mM). We illustrate a highly reproducible fabrication process of zinc oxide nanorod-based FETs, where vertically grown nanorods with a higher surface-to-volume ratio enhance the enzyme immobilization, provide a microenvironment for longer enzyme activity, and translate to better glucose sensing parameters. Additionally, our electrolyte-gated FET biosensor showed promising application in freshly drawn mouse blood samples. These findings suggest a great opportunity to translate into practical high-performance biosensors for a broad range of analytes.