The availability of software developed to correct the distortion associated with non-metric cameras was examined using a test chart composed of 63 gridiron dots and two CCD cameras: a commercially available camera as the reference and an actual surveillance camera installed in a bank. The software was designed to calculate distortion parameters such as the radial and tangential distortion coe‹cients and the principal points. Constant parameter values were obtained when test charts were taken at six positions in the lensˆeld. The average of displacement errors between the 63 dots on the corrected image and those on the presumed ideal image was measured. In the reference camera, a pre-correction error of 1.24 mm decreased to 0.08 mm after correction. In the surveillance camera the error decreased from 7.92 mm to 0.33 mm. The present method was compared with two others: the graph method and the Open CV method. The former uses a distortion graph, which indicates the distortion level () at several locations from the center to the radial direction of the lensˆeld. The latter is a free camera calibration software tool, developed by Intel Co. for the calculation of the intrinsic camera parameters of video camera lenses. The present method was associated with smaller error values than either of the other two methods. It is therefore suggested that this method could usefully be applied to distortion correction of facial images taken by surveillance cameras.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.