Titanium plates are widely used in clinical settings because of their high bone affinity. However, owing to their high elastic modulus, these plates are not suitable for bone repair since their proximity to the bone surface for prolonged periods can cause stress shielding, leading to bone embrittlement. In contrast, titanium fiber plates prepared by molding titanium fibers into plates by simultaneously applying compression and shear stress at normal room temperature can have an elastic modulus similar to that of bone cortex, and stress shielding will not occur even when the plate lies flush against the bone's surface. Titanium fibers can form a porous structure suitable for cell adhesion and as a bone repair scaffold. A titanium fiber plate is combined with osteoblasts and shown that the titanium fiber plate is better able to facilitate bone tissue repair than the conventional titanium plate when implanted in rat bone defects. Capable of being used in close contact with bone for a long time, and even capable of promoting bone repair, titanium fiber plates have a wide range of applications, and are expected to make great contributions to clinical management of increasing bone diseases, including bone fracture repair and bone regenerative medicine.

Background: There are many types of therapies for cancer. In these days, immunotherapies, especially immune checkpoint inhibitors, are focused on. Though many types of immune checkpoint inhibitors are there, the difference of effect and its mechanism are unclear. Some reports suggest the response rate of anti-PD-1 antibody is superior to that of anti-PD-L1 antibody and could potentially produce different mechanisms of action. On the other hand, Treg also express PD-1; however, their relationship remains unclear. Methods: In this study, we used osteosarcoma cell lines in vitro and osteosarcoma mouse model in vivo. In vitro, we analyzed the effect of IFNγ for expression of PD-L1 on the surface of cell lines by flowcytometry. In vivo, murine osteosarcoma cell line LM8 was subcutaneously transplanted into the dorsum of mice. Mouse anti-PD-1 antibody was intraperitoneally administered. we analysed the effect for survival of anti-PD-1 antibody and proportion of T cells in the tumour by flowcytometry. Results: We discovered that IFNγ increased PD-L1 expression on the surface of osteosarcoma cell lines. In assessing the relationship between anti-PD-1 antibody and Treg, we discovered the administration of anti-PD-1 antibody suppresses increases in tumour volume and prolongs overall survival time. In the tumour microenvironment, we found that the administration of anti-PD-1 antibody decreased Treg within the tumour and increased tumour-infiltrating lymphocytes. Conclusions: Here we clarify for the first time an additional mechanism of anti-tumour effect-as exerted by anti-PD-1 antibody decreasing Treg-we anticipate that our findings will lead to the development of new methods for cancer treatment.

Many recent studies have been conducted to assess the ability of composite materials containing carbon nanotubes (CNTs) with high bone affinity to serve as scaffolds in bone regenerative medicine. These studies have demonstrated that CNTs can effectively induce bone formation. However, no studies have investigated the usefulness of scaffolds consisting exclusively of CNTs in bone regenerative medicine. We built a three-dimensional block entity with maximized mechanical strength from multi-walled CNTs (MWCNT blocks) and evaluated their efficacy as scaffold material for bone repair. When MWCNT blocks containing recombinant human bone morphogenetic protein-2 (rhBMP-2) were implanted in mouse muscle, ectopic bone was formed in direct contact with the blocks. Their bone marrow densities were comparable to those of PET-reinforced collagen sheets with rhBMP-2. On day 1 and day 3, MC3T3-E1 preosteoblasts were attached to the scaffold surface of MWCNT blocks than that of PET-reinforced collagen sheets. They also showed a maximum compression strength comparable to that of cortical bone. Our MWCNT blocks are expected to serve as bone defect filler and scaffold material for bone regeneration.

Carbon nanotubes (CNTs) have attracted a great deal of attention for the biological and medical science fields because of their characteristic physical and biological properties. In this study, we investigated the capacity of the 3D porous CNT scaffold (CNT porous block; CNTp) for bone regenerative medicine. Surface observations using a scanning electron microscope (SEM), crystal depositions on the surface of CNTps immersed in simulated body fluid (SBF), and evaluations of protein adsorption and controlled releasing were conducted to assess physical properties. The cell proliferation and cell morphology were observed using SEM and fluorescent microscopy. CNTps were implanted into critical-size mouse calvarial defects and evaluated for their osteoconductive ability and in vivo controlled release of recombinant human BMP-2 (rhBMP-2). Interconnected porous HA ceramics (IP-CHAs) were used for comparison. CNTps have multiporous structures with interporous connections with networks of multiwalled CNTs. Crystals containing calcium and phosphate were deposited in CNTps and on the surface of the CNT networks by immersing CNTps in SBF. CNTps adsorbed more significantly and released protein more gradually than IP-CHAs. Preosteoblasts seeded onto CNTps filled pores with stretched actin filaments and filopodia. Compared with IP-CHAs, CNTps showed significantly higher cell proliferation, better osteoconduction, and more bone generation with rhBMP-2. In this study, CNTps demonstrated good osteoconductive ability, cell attachment and proliferation capacity, and growth factor retaining ability. CNTps have the potential not only as artificial bones for the treatment of bone defects, but also as scaffolds for regenerative medicine using tissue engineering approaches.

Abstract:The unidirectional porous hydroxyapatite HAp (UDPHAp) is a scaffold with continuous communicated pore structure in the axial direction. We evaluated and compared the ability of the UDPHAp as a three-dimensional (3D) bone tissue engineering scaffold to the interconnected calcium porous HAp ceramic (IP-CHA). To achieve this, we evaluated in vitro the compressive strength, controlled rhBMP-2 release behavior, adherent cell morphology, cell adhesion manner, and cell attachment of UDPHAp. As a further in vivo experiment, UDPHAp and IP-CHA with rhBMP-2 were transplanted into mouse calvarial defects to evaluate their bone-forming ability. The Results demonstrated that the maximum compressive strengths of the UDPHAp was 7.89 ± 1.23 MPa and higher than that of IP-CHA (1.92 ± 0.53 MPa) (p = 0.0039). However, the breaking energies were similar (8.99 ± 2.72 vs. 13.95 ± 5.69 mJ, p = 0.055). The UDPHAp released rhBMP-2 more gradually in vivo. Cells on the UDPHAp adhered tightly to the surface, which had grown deeply into the scaffolds. A significant increase in cell number on the UDPHAp was observed compared to the IP-CHA on day 8 (102,479 ± 34,391 vs. 32,372 ± 29,061 estimated cells per scaffold, p = 0.0495). In a mouse calvarial defect model, the percentages of new bone area (mature bone + trabecular bone) in the 2x field were 2.514% ± 1.224% for the IP-CHA group and 7.045% ± 2.055% for the UDPHAp group, and the percentage was significantly higher in the UDPHAp group (p = 0.0209). While maintaining the same strength as the IP-CHA, the UDPHAp with 84% porosity showed a high cell number, high cell invasiveness, and excellent bone formation. We believe the UDPHAp is an excellent material that can be applied to bone regenerative medicine.

Purpose Although both anti-PD-1 antibody and treatments using anti-PD-L1 antibody are currently in clinical use, their therapeutic effects vary according to cancer type. One of the factors accounting for this variability is the expression level of the immune checkpoint molecule that differs between cancer types; thus, it is important to clarify the relationship between clinical outcomes and immune checkpoint molecules for all types of human cancer. The purpose of this study is to evaluate the clinical outcome of osteosarcoma in relation to PD-L1, PRF, GZMB, and IFNγ expression. Methods Using 19 clinical specimens of osteosarcoma, we examined the expression of PD-L1, PRF, GZMB, and IFNγ in relation to their clinical outcomes. Results PD-L1 expression correlated with early metastatic formation in clinical specimens of osteosarcoma, and the group with highly expressed functional markers for T cells such as PRF and GZMB resulted in a long overall survival time. Conclusion This is the first study to elucidate the clinical outcomes of osteosarcoma in relation to PD-L1, PRF, GZMB, and IFNγ expression. This study provides valuable information regarding the clinical indication and prediction of effect for anti-PD-1 antibody in osteosarcoma.

No abstract

Study Design: This is a retrospective single-center and single-surgeon study. Objective: We investigated the correlation between lower instrumented vertebra (LIV) and spinal mobility 2 years after posterior spinal fusion with pedicle screws for adolescent idiopathic scoliosis (AIS) for optimal LIV selection. Summary of Background: Spinal motion can become limited in scoliosis patients who undergo posterior spinal fusion. However, few reports exist on spinal mobility after posterior spinal fusion for AIS and the relationship between the LIV and mobility is unknown. We hypothesize that mobility limitation increases as the LIV is moved inferiorly. Data: Of 72 consecutive patients who received posterior spinal fusion using pedicle screws for AIS between October 2009 and August 2015, 66 patients (5 male and 61 female, mean age: 14.9 y) were enrolled. Materials and Methods: In total, 66 patients were retrospectively reviewed after stratification according to LIV level. Follow-up rate was 91.7%. Patients were examined for the fingertip-to-floor distance (FFD) before and 2 years after surgery. FFD was measured from the tips of the middle fingers to the floor with the barefoot subject bent maximally forward and the feet together and knees straight. Clinical outcome was assessed using Scoliosis Research Society-22 patient questionnaire (SRS-22r) scores and a visual analog scale for low back pain before and at 2 years postoperatively. Results: The median number of fused vertebrae was 9 (range: 4–15). The LIV was T11–12 in 15 patients, L1 in 11 patients, L2 in 10 patients, and L3 in 30 patients. The median decrease in FFD according to LIV at 2 years after surgery was T11–12: 0 cm, L1: 0 cm, L2: 5.5 cm, and L3: 10 cm. Thus, limited FFD became significantly more severe as the LIV was moved downwards (P<0.01). There were no significant correlations between limited FFD and SRS-22r or pain visual analog scale scores at 2 years postoperatively. Conclusions: FFD became significantly more restricted as the LIV was moved inferiorly but clinical results appeared unaffected by limited FFD.