Design considerations for ultraviolet-nanoimprint lithography resists were investigated focusing on the major issues of ink-jetting performance, pattern formability, release property, and dry etching resistance. Regarding ink-jetting performance, small droplet ink-jetting of 0.7 pl was successfully demonstrated by adjusting the resist fluid property to the ink-jet coater and controlling the resist volatilization. Regarding pattern formability, a resist pattern was imprinted from a mold pattern of 28 nm in width and 60 nm in depth without pattern dimension change. It was thought that modulus control of the resist was more important than resist shrinkage in achieving excellent pattern formability. As for release property, resist with fluorine monomer and with nonreactive fluorine antisticking agent were compared. The results indicated that resist design has the capability to both reduce separation force and maintain a clear mold surface. The mold release agent decomposed with an increasing number of imprint shots, but the low release-force resist with nonreactive antisticking agent was able to control degradation of the mold release agent and thus improve release property endurance. Regarding etching resistance, it was found that increasing the ring parameter of resist is essential for high etching resistance, and resulted in improved etched pattern features of the substrate.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.