A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. In this work, field emission current from a scanning tunneling microscope (STM) tip is used as the heating source. Pulse voltages of 2-7 V with a duration of 500 ns were applied to a CoNi/Pt multilayered film. Different types of Ir/Pt and W STM tips were used in the experiment. The results show that thermally recorded magnetic marks are formed with a nearly uniform mark size of 170 nm when the pulse voltage is above a threshold voltage. The threshold voltage depends on the material work function of the tip, with W having a threshold voltage about 1 V lower than Pt. The emission area of our tip-sample system derived from an analytic expression for field emission current is approximately equal to the mark size, and is largely independent of pulse voltage. This emission area is large compared to lateral heat diffusion in the film. Thus higher applied voltages lead to higher peak temperatures in the model of the write process, but the mark diameter remains relatively unchanged.Index Terms-Field emission, high-density recording, prolate spheroidal coordinates, scanning tunneling microscope.

No abstract

No abstract

Microstructure and magnetic properties of sputter deposited Co/Pd multilayered perpendicular magnetization films with amorphous C or Si seedlayer were investigated. The angstrom scale surface roughness of the seedlayer causes fine crystal grains to form in the Co/Pd multilayer and to decrease the extent of intergranular exchange coupling, while it obstructs the formation of a regular interface between Co and Pd layers. The Si seedlayer, which exhibits a surface roughness lower than the C seedlayer, yields Co/Pd multilayered films with the lowest intergranular exchange coupling and the highest coercivity. The improvement in magnetic properties of the Co/Pd film with Si seedlayer is attributable mainly to the formation of Pd2Si at the interface between the Co/Pd layer and the Si seedlayer. The Pd2Si provides suitable nucleation sites for the grain growth of Co/Pd multilayered film that can be utilized as a perpendicular magnetic recording medium.

No abstract

No abstract

No abstract

No abstract