We report on a femtosecond fiber laser system comprising four coherently combined large-pitch fibers as the main amplifier. With this system, a pulse energy of 1.3 mJ and a peak power of 1.8 GW are achieved at 400 kHz repetition rate. The corresponding average output power is as high as 530 W. Additionally, an excellent beam quality and efficiency of the combination have been obtained. To the best of our knowledge, such a parameter combination, i.e., gigawatt pulses with half a kilowatt average power, has not been demonstrated so far with any other laser architecture.
Since the advent of femtosecond lasers, performance improvements have constantly impacted on existing applications and enabled novel applications. However, one performance feature bearing the potential of a quantum leap for high-field applications is still not available: the simultaneous emission of extremely high peak and average powers. Emerging applications such as laser particle acceleration require exactly this performance regime and, therefore, challenge laser technology at large. On the one hand, canonical bulk systems can provide pulse peak powers in the multi-terawatt to petawatt range, while on the other hand, advanced solid-state-laser concepts such as the thin disk, slab or fibre are well known for their high efficiency and their ability to emit high average powers in the kilowatt range with excellent beam quality. In this contribution, a compact laser system capable of simultaneously providing high peak and average powers with high wall-plug efficiency is proposed and analysed. The concept is based on the temporal coherent combination (pulse stacking) of a pulse train emitted from a high-repetition-rate femtosecond laser system in a passive enhancement cavity. Thus, the pulse energy is increased at the cost of the repetition rate while almost preserving the average power. The concept relies on a fast switching element for dumping the enhanced pulse out of the cavity. The switch constitutes the key challenge of our proposal. Addressing this challenge could, for the first time, allow the highly efficient dumping of joule-class pulses at megawatt average power levels and lead to unprecedented laser parameters.
The average output power of Yb-doped fiber amplifier systems is currently limited by the onset of transverse mode instabilities. Besides, it has been recently shown that the transverse mode instability threshold can be significantly reduced by the presence of photodarkening in the fiber. Therefore, reducing the photodarkening level of the core material composition is the most straightforward way to increase the output average power of fiber amplifier systems but, unfortunately, this is not always easy or possible. In this paper we present guidelines to optimize the output average power of fiber amplifiers affected by transverse mode instabilities and photodarkening. The guidelines derived from the simulations do not involve changes in the composition of the active material (except for its doping concentration), but can still lead to a significant increase of the transverse mode instability threshold. The dependence of this parameter on the active ion concentration and the core conformation, among others, will be studied and discussed.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.