<p class="Abstrak">Terdapat kasus rumah sakit yang memiliki jumlah pasien yang lebih banyak daripada perawat jaga sehingga dapat menyebabkan kelalaian dalam pengontrolan sehingga menyebabkan adanya masalah pada sistem organ dikarenakan penggantian cairan infus dilakukan terlambat atau bahkan cairan infus tidak menetes akibat kesalahan alat, sehingga harus dibuat sistem notifikasi untuk pengontrolan cairan infus di rumah sakit menggunakan mikrokontroler dan terhubung secara <em>wireless</em> ke ruang perawat. Perancangan sistem alarm infus ini menggunakan photodioda dan inframerah sebagai pendeteksi ada tidaknya cairan infus yang menetes, serta untuk menghitung volume cairan infus. Sistem alarm ini akan terhubung ke sebuah <em>buzzer</em> yang terdapat di ruang jaga secara <em>wireless</em> dengan tipe nRF2401L dengan menggunakan sistem minimum arduino nano 328p. Sistem catu daya menggunakan baterai lithium yang dapat di charge melalui USB sehingga alat ini menjadi <em>portable</em> dengan bantuan modul TP4056. Alarm akan berbunyi pada dua kondisi yaitu ketika cairan tidak menetes dan ketika cairan <100 mL. Hasil pengujian sistem untuk perhitungan tetesan/menit memiliki korelasi 0.9866 yang berarti korelasi sangat kuat dan linier antara nilai ukur dan nilai hitung. Sementara untuk pengujian sistem alarm berfungsi dengan baik ketika cairan tidak menetes dalam waktu 7 s alarm berbunyi dan ketika cairan <100 mL alarm juga akan langsung berbunyi. Jarak efektif untuk pengiriman data melalui wireless yaitu pada jarak 4 m - 6 m.</p><p class="Abstrak"><em><strong>Abstract</strong></em></p><p class="Judul2"><em>Some hospitals that have a larger number of patients than nurse duty so as to cause negligence in controlling causing problems in the organs system due to fluid replacement is done late or even infusion fluid does not drip due to faulty tool, so we created notification system for control hospital infusion fluid using a microcontroller and wireless connected to the nurses room</em><em>. </em><em>The design of this infusion alarm system using photodioda and infrared as a detector of the presence of infusion fluids that drip, as well as to calculate the volume of intravenous fluids. This alarm system will connect to a buzzer contained in the duty space wirelessly with type nRF2401L using a minimum</em><em> system</em><em> arduino nano 328p. The power supply system uses lithium batteries that can be charged via USB so that the device becomes portable with the help of TP4056 module. The alarm will sound in two conditions when the liquid does not drip and when the liquid is <100 mL. System test results for the calculation of droplets / minute has a correlation of 0.9866 which means the correlation is very strong and linear between the value of measuring and calculating value. As for testing the alarm system works well when the liquid does not drip within 7 s, alarm already sounds and when the fluid <100 mL alarm will immediately sound. Effective distance for sending data via wireless which is at a distance of 4 m - 6 m.</em></p><p class="Abstrak"><em><strong><br /></strong></em></p>
This study investigates the shading on PV systems. Shading has considerable influence on the solar cells characteristics, temperature and radiation on site need to be considered as the basis for designing PV systems. Modeling conducted on a 1 kWp PV system at a latitude of 6°53ˈ2.69̎S and a longitude of 107°32ˈ28.69̎, to find the magnitude of solar radiation, surface temperature, and tilt angle, and partial shadow simulation using PVsyst software. Testing result shows the characteristic PV 1 kWp is obtained with the angle of solar cell shade at 18˚, and azimuth 0˚, the shading per year generates 4.71 kWh/m2in a solar active area at 6.9m2, the power losses of 20.8% of its nominal power.
Konsumsi listrik di Indonesia terus meningkat, di saat cadangan energi konvensional terus menurun, hal ini mendorong manusia beralih ke energi baru dan terbarukan yang menjamin ketersedian sumber listrik. Suatu sistem Pembangkit Listrik Tenaga Surya (PLTS) telah terpasang di Laboratorium Teknik Elektro, Fakultas Teknik Universitas Jenderal Achmad Yani dengan kapasitas 1000 Wp. Sistem PLTS diusulkan sebagai sumber listrik baru untuk mendukung kebutuhan listrik laboratorium selain PLN. Maximum power point tracking (MPPT) merupakan suatu metode yang digunakan untuk memaksimalkan energi matahari terhadap performa keluaran tegangan, arus dan daya PLTS. Makalah ini membandingkan pemodelan yang telah dilakukan menggunakan algoritma MPPT yaitu Incremental Conductance (IC) dan Perturbation & Observation (P&O) dalam kondisi ideal pada Standard Test Condition (STC) 1000 W/m2 dan temperatur 25°C. Algoritma disimulasikan menggunakan perangkat lunak PSIM 9.0. Pemodelan kendali MPPT DC/DC Boost Converter disesuaikan dengan karakteristik PLTS 1000 Wp dan dihitung untuk memenuhi jaringan PLN 220V/50 Hz. Hasil simulasi menunjukkan kendali MPPT dengan algoritma P&O memiliki output daya yaitu 960 W dan memiliki efisiensi 99,9% saat kondisi STC sedangkan menggunakan metode IC sebesar 944 W dan memiliki efisiensi 98,7%. Metode P&O dipilih mampu memberikan hasil yang maksimum dibandingkan dengan metode IC pada sistem PLTS 1000 Wp di Laboratorium Teknik Elektro.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.