Itaconic acid is one of the basic chemicals for the polymer industry, which can be produced on the basis of renewable raw materials. Since the middle of the twentieth century, itaconic acid has been produced industrially using the filamentous fungus Aspergillus terreus. But the demand for the organic acid is low due to the high production costs compared to alternative petrochemical manufactured raw materials. The high production costs are based on a low final titer, low productivities, and the usage of pure sugars, purified molasses, or starch hydrolysates, since the fungus reacts very sensitively to impurities in a culture medium. This review provides a comprehensive overview of the most recent developments, including a spectrum of studied microorganisms and their capabilities for the production of itaconic acid. The technological achievements in the biotechnological production of itaconic acid are presented. Particular attention is paid to current achievements in terms of suitable alternative substrates and their applicability in fermentation processes. Also, the pathway of itaconic acid and especially the influences on the fermentation process, which must be known in order to achieve a high final titer of itaconic acid, a yield close to the theoretical yield, and high productivity.
Itaconic acid is a promising organic acid and is commercially produced by submerged fermentation of Aspergillus terreus. The cultivation process of the sensitive filamentous fungus has been studied intensively since 1932, with respect to fermentation media components, oxygen supply, shearing rate, pH value, or culture method. Whereas increased final titers were achieved over the years, the productivity has so far remained quite low. In this study, the impact of the pH on the itaconic acid production was investigated in detail. The pH during the growth and production phase had a significant influence on the final itaconic acid concentration and pellet diameter. The highest itaconic acid concentration of 160 g/L was achieved at a 1.5-L scale within 6.7 days by raising and controlling the pH value to pH 3.4 in the production phase. An ammonia solution and an increased phosphate concentration were used with an itaconic acid yield of 0.46 (w/w) and an overall productivity of 0.99 g/L/h in a fed-batch mode. A cultivation with a lower phosphate concentration resulted in an equal final concentration with an increased yield of 0.58 (w/w) after 11.8 days and an overall productivity of 0.57 g/L/h. This optimized process was successfully transferred from a 1.5-L scale to a 15-L scale. After 9.7 days, comparable pellet morphology and a final concentration of 150 g/L itaconic acid was reached. This paper provides a process strategy to yield a final titer of itaconic acid from a wild-type strain of A. terreus which is in the same range as the well-known citric acid production.
Itaconic acid is an industrial produced chemical by the sensitive filamentous fungus Aspergillus terreus and can replace petrochemical-based monomers for polymer industry. To produce itaconic acid with alternative renewable substrates, such as lignocellulosic based hydrolysates, a robust microorganism is needed due to varying compositions and impurities. Itaconic acid producing basidiomycetous yeasts of the family Ustilaginaceae provide this required characteristic and the species Ustilago rabenhorstiana was examined in this study. By an optimization of media components, process parameters, and a fed-batch mode with glucose the final titer increased from maximum 33.3 g·L−1 in shake flasks to 50.3 g·L−1 in a bioreactor. Moreover, itaconic acid was produced from different sugar monomers based on renewable feedstocks by U. rabenhorstiana and the robustness against weak acids as sugar degradation products was confirmed. Based on these findings, U. rabenhorstiana has a high potential as alternative natural itaconic acid producer besides the well-known U. maydis and A. terreus.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.