No abstract

In this work, cold-spray technique was employed for rapid coating of copper on in-use steel parts. The primary intention was to alleviate the tendency of SARS-CoV-2 (COVID-19) virus to linger longer on touch surfaces that attract high-to-medium volume human contact, such as the push plates used in publicly accessed buildings and hospitals. The viricidal activity test revealed that 96% of the virus was inactivated within 2-hrs, which was substantially shorter than the time required for stainless steel to inactivate the virus to the same level. Moreover, it was found that the copper-coated samples significantly reduces the lifetime of COVID-19 virus to less than 5-hrs. The capability of the cold-spray technique to generate antiviral copper coating on the existing touch surface eliminates the need for replacing the entire touch surface application with copper material. Furthermore, with a short manufacturing time to produce coatings, the re-deployment of copper-coated parts can be accomplished in minutes, thereby resulting in significant cost savings. This work showcases the capability of cold-spray as a potential copper-coating solution for different in-use parts and components that can act as sources for the spread of the virus.

No abstract

Introduction:Hypertension is a major risk factor contributing to cardiovascular disease, which is the number one cause of deaths worldwide. Although antihypertensive medications are effective at controlling blood pressure, current first-line treatment for hypertension is nonpharmacological lifestyle modifications. Recent studies indicate that isometric resistance training (IRT) may also be effective for assisting with blood pressure management. The aim of this study was to determine the efficacy of IRT for blood pressure management and the suitability of a low-intensity working control group.Methods:Forty hypertensive individuals, aged between 36 and 65 years, conducted IRT for 8 weeks. Participants were randomized into 2 groups, working at an intensity of either 5% or 30% of their maximum voluntary contraction. Participants performed 4 × 2 minute isometric handgrip exercises with their nondominant hand, each separated by a 3-minute rest period, 3 days a week.Results:Blood pressure measurements were conducted at baseline and at the end of the protocol using a Finometer. Eight weeks of isometric resistance training resulted in a 7-mmHg reduction of resting systolic blood pressure (SBP) (136 ± 12 to 129 ± 15; P = 0.04) in the 30% group. Reductions of 4 mmHg were also seen in mean arterial pressure (MAP) (100 ± 8 to 96 ± 11; P = 0.04) in the 30% group. There were no statistically significant reductions in diastolic blood pressure for the 30% group, or any of the data for the 5% group.Conclusion:Isometric resistance training conducted using handgrip exercise at 30% of maximum voluntary contraction significantly reduced SBP and MAP. A lack of reduction in blood pressure in the 5% group indicates that a low-intensity group may be suitable as a working control for future studies.

No abstract

No abstract

No abstract

No abstract