The development of an efficient catalyst system for the electrochemical reduction of carbon dioxide into energy-rich products is a major research topic. Here we report the catalytic ability of polyacrylonitrile-based heteroatomic carbon nanofibres for carbon dioxide reduction into carbon monoxide, via a metal-free, renewable and cost-effective route. The carbon nanofibre catalyst exhibits negligible overpotential (0.17 V) for carbon dioxide reduction and more than an order of magnitude higher current density compared with the silver catalyst under similar experimental conditions. The carbon dioxide reduction ability of carbon nanofibres is attributed to the reduced carbons rather than to electronegative nitrogen atoms. The superior performance is credited to the nanofibrillar structure and high binding energy of key intermediates to the carbon nanofibre surfaces. The finding may lead to a new generation of metal-free and non-precious catalysts with much greater efficiency than the existing noble metal catalysts.

No abstract

This article reports a novel hybrid multiscale carbon‐fiber/epoxy composite reinforced with self‐healing core‐shell nanofibers at interfaces. The ultrathin self‐healing fibers were fabricated by means of coelectrospinning, in which liquid dicyclopentadiene (DCPD) as the healing agent was enwrapped into polyacrylonitrile (PAN) to form core‐shell DCPD/PAN nanofibers. These core‐shell nanofibers were incorporated at interfaces of neighboring carbon‐fiber fabrics prior to resin infusion and formed into ultrathin self‐healing interlayers after resin infusion and curing. The core‐shell DCPD/PAN fibers are expected to function to self‐repair the interfacial damages in composite laminates, e.g., delamination. Wet layup, followed by vacuum‐assisted resin transfer molding (VARTM) technique, was used to process the proof‐of‐concept hybrid multiscale self‐healing composite. Three‐point bending test was utilized to evaluate the self‐healing effect of the core‐shell nanofibers on the flexural stiffness of the composite laminate after predamage failure. Experimental results indicate that the flexural stiffness of such novel self‐healing composite after predamage failure can be completely recovered by the self‐healing nanofiber interlayers. Scanning electron microscope (SEM) was utilized for fractographical analysis of the failed samples. SEM micrographs clearly evidenced the release of healing agent at laminate interfaces and the toughening and self‐healing mechanisms of the core‐shell nanofibers. This study expects a family of novel high‐strength, lightweight structural polymer composites with self‐healing function for potential use in aerospace and aeronautical structures, sports utilities, etc. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013

No abstract

No abstract

The work aims at the experimental and theoretical study of the mechanism of meltblowing. Meltblowing is a popular method of producing polymer microfibers and nanofibers en masse in the form of nonwovens via aerodynamic blowing of polymer melt jets. However, its physical aspects are still not fully understood. The process involves a complex interplay of the aerodynamics of turbulent gas jets with strong elongational flows of polymer melts, none of them fully uncovered and explained. To evaluate the role of turbulent pulsations ͑produced by turbulent eddies in the gas jet͒ in meltblowing, we studied first a model experimental situation where solid flexible sewing threadlines were subjected to parallel high speed gas jet. After that a comprehensive theory of meltblowing is developed, which encompasses the effects of the distributed drag and lift forces, as well as turbulent pulsations acting on polymer jets, which undergo, as a result, severe bending instability leading to strong stretching and thinning. Linearized theory of bending perturbation propagation over threadlines and polymer jets in meltblowing is given and some successful comparisons with the experimental data are demonstrated.

In the present work, a systematic study of the release kinetics of two embedded model drugs (one completely water soluble and one partially water soluble) from hydrophilic and hydrophobic nanofiber mats was conducted. Fluorescent dye Rhodamine B was used as a model hydrophilic drug in controlled release experiments after it was encapsulated in solution-blown soy-protein-containing hydrophilic nanofibers as well as in electrospun hydrophobic poly(ethylene terephthalate) (PET)-containing nanofibers. Vitamin B2 (riboflavin), a partially water-soluble model drug, was also encapsulated in hydrophobic PET-containing nanofiber mats, and its release kinetics was studied. The nanofiber mats were submerged in water, and the amount of drug released was tracked by fluorescence intensity. It was found that the release process saturates well below 100% release of the embedded compound. This is attributed to the fact that desorption is the limiting process in the release from biopolymer-containing nanofibers similar to the previously reported release from petroleum-derived polymer nanofibers. Release from monolithic as well as core-shell nanofibers was studied in the present work. Moreover, to facilitate the release and ultimately to approach 100% release, we also incorporated porogens, for example, poly(ethylene glycol), PEG. It was also found that the release rate can be controlled by the porogen choice in nanofibers. The effect of nanocracks created by leaching porogens on drug release was studied experimentally and evaluated theoretically, and the physical parameters characterizing the release process were established. The objective of the present work is a detailed experimental and theoretical investigation of controlled drug release from nanofibers facilitated by the presence of porogens. The novelty of this work is in forming nanofibers containing biodegradable and biocompatible soy proteins to facilitate controlled drug release as well as in measuring detailed quantitative characteristics of the desorption processes responsible for release of the model substance (fluorescent dye) and the vitamin (riboflavin) in the presence of porogens.

The work is devoted to the theory of meltblown polymer jets. Polymer jets are experiencing strong stretching and flapping being subjected to the pulling action of a high speed surrounding axisymmetric gas jet. The bending perturbations of polymer melt jets are triggered by the surrounding turbulent eddies and enhanced by the distributed lift force acting on the jets. We study first growth of small perturbations in the framework of the linear stability theory. Then, the fully nonlinear case of large-amplitude planar bending perturbations of polymer jet is solved numerically. Both isothermal and nonisothermal cases are considered. The cooling of the surrounding gas jet results in cooling of the polymer jet inside, and to the arrest of the bending perturbation growth due to melt solidification.