Yapıların deprem davranışları çeşitli dinamik parametreler kullanılarak belirlenmektedir. Bu parametreler yapının mevcut yapı sal özelliklerine, malzeme özelliklerine, sınır şartlarına ve hasar durumuna bağlı olarak elde edilmektedir. Karmaşık yapısal dinamik problemleri çözmek için modal analiz inşaat mühendisliğinde kullanılan bir yöntemdir. Minare yapıları, uzun ve ince yığma yapılar olduğu için yanal yüklere karşı hassas yapılardır. Narinlik etkisi nedeniyle, şiddetli depremlerde bu yapılarda önemli hasa rlar meydana gelmektedir. Sunulan çalışmada, Kırklareli ili Merkez ilçesinde yer alan ve 1383 yılında inşa edilmiş olan Hızırbey Camii minaresinin lineer dinamik analizi gerçekleştirilmiştir. Önceki dönemde restorasyon süreci geçiren Hızırbey Camii'nin, restorasyon raporundan yararlanılarak minare boyutları elde edilmiştir. Yapının duvarlarında kullanılan taş malzemeye yönelik çalışmalar kapsamında malzeme özellikleri belirlenmiştir. Söz konusu yapının tarihi değeri nedeniyle tahribatsız deney yöntemlerinden faydalanılarak malzeme elastisite modülü tayin edilmiştir. Minarenin dinamik analizi, mod birleştirme yöntemi ile 2007 ve 2018 Deprem Yönetmeliklerine (DBYBHY 2007 ve TBDY 2018) göre SAP2000 yazılımı kullanılarak yapılmış ve sonuçlar karşılaştırılmıştır. Minare yapısı prizmatik çubuk elemanlarla ve kabuk elemanlarla modellenmiş olup modellemelerden elde edilen sonuçlar karşılaştırılmıştır. Minarenin temel periyodunun analitik olarak bulunması için ise Rayleigh yöntemini esas alan bir yaklaşımda çalışma kapsamında önerilmiştir. Çalışmanın sonunda TBDY 2018 yönetmeliğine göre elde edilen kuvvet ve yer değiştirmelerin DBYBHY 2007 yönetmeliğine oranla daha büyük değerlere sahip olduğu belirlenmiştir. Ayrıca çubuk eleman kabulüyle yapılan modellemenin kabuk elemanla modellemeye yakın değerler verdiği gözlenmiştir. Çalışmada önerilen Rayleigh yöntemi ile bulunan minarenin hakim periyodu, sonlu elemanlar yöntemi ile elde edilen sonuca çok yakın olarak elde edilmiştir. Anahtar Kelimeler: Hızırbey Camii minaresi, dinamik analiz, kule yapısı, küfeki taşı.
Binalarda burulma olması durumunda yapıya ilave deprem kuvvetleri etkimekte ve iç kuvvetler ve yer değiştirmeler artmaktadır. Bu nedenle düşey taşıyıcı sistemlerin planda mümkün olduğunca burulma etkisini azaltıcı şekilde yerleştirilmesi önemlidir. Burulma etkilerini en aza indirmek için rijitlik merkezi ile ağırlık merkezinin mümkün olduğunca yakın olması gerekmektedir. Her ne kadar mevcut deprem yönetmeliklerinin birçoğunda analiz aşamasında rijitlik merkezinin belirlenmesine ihtiyaç duyulmasa da özellikle burulma etkilerinin azaltılması açısından rijitlik merkezinin yerinin bilinmesi önemlidir. Uygulamada rijitlik merkezi ve kayma merkezi kavramları zaman zaman karıştırılmakta ve yanlış olarak bulunabilmektedir. Perde-çerçeve sistemlerde perde ve çerçevede hâkim davranışın farklı olması nedeniyle, perde ve çerçevelerin boyutlarının yapı yüksekliği boyunca sabit olması durumunda bile rijitlik merkezi kattan kata değişmektedir. Rijitlik merkezi bu tür yapılarda bazı katlarda plan dışına bile çıkabilmektedir. Bu çalışmada öncelikle rijitlik merkezi ve kayma merkezi kavramları kısaca açıklanmıştır. Daha sonra rijitlik merkezi ve kayma merkezinin bulunması için bir yaklaşım önerilmiştir. Sunulan yaklaşım literatürden alınan iki örnek üzerinde uygulanarak elde edilen sonuçlar literatür ve ETABS yazılımı ile karşılaştırılmış ve sunulan yöntemin uygunluğu gösterilmiştir.
Lateral displacement is a vary important parameter that we need to calculate when structures are subjected to lateral loads like earthquake and wind loads. In this study, a method is proposed for lateral displacement calculation of structures with different structural systems in different planes. This method is based on the continuum system calculation model. The method suggested in the literature for only top displacement in the case of uniform loading, is developed in this study for the calculation of displacements at each storey level and also in both uniform and triangular loading conditions. At the end of the study, twenty-eight storey building with shear wall-frame bearing system, which was taken from the literature, was solved with the presented method and Finite Element Method. The shear walls were modelled with three different element types for the analysis with the Finite Element Method with structural engineering program used. The results, obtained from the Continuum Method and Finite Element Method were presented in tables and by figures. Thus, the compatibility of the proposed method with the classical Finite Element Method was investigated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.