No abstract

Membrane distillation is a process that utilizes differences in vapor pressure to permeate water through a macro-porous membrane and reject other non-volatile constituents present in the influent water. This review considers the fundamental heat and mass transfer processes in membrane distillation, recent advances in membrane technology, module configurations, and the applications and economics of membrane distillation, and identifies areas that may lead to technological improvements in membrane distillation as well as the application characteristics required for commercial deployment. Keywordsa function of temperature, vapor pressure, and of the gas molecular mass K 0 membrane characteristic defined by Equation (9) Kn Knudsen number K(T) a function of temperature and molecular weight of the gas l mean free path of the molecules l m distance between parallel spacer fibres (m) LEP Limit Entry Pressure (kPa) M molecular mass (g/mol) M w molecular weights of water (g/mol) M a molecular weights of air (g/mol) n number of CNTs per unit cross section in bucky-paper P pressure in the air gap (kPa) half time to reach the maximum intensity-laser flash technique (s) t proportion of conductive heat (balance due to evaporative heat) loss through the membrane T mean temperature in the pores (K)

No abstract

25Wastewater nutrient recovery holds promise for more sustainable water and 26 agricultural industries. We critically review three emerging membrane processes -forward 27 osmosis (FO), membrane distillation (MD) and electrodialysis (ED) -that can advance 28 wastewater nutrient recovery. Challenges associated with wastewater nutrient recovery were 29 identified. The advantages and challenges of applying FO, MD, and ED technologies to 30 wastewater nutrient recovery are discussed, and directions for future research and 31 development are identified. Emphasis is given to exploration of the unique mass transfer 32properties of these membrane processes in the context of wastewater nutrient recovery. We 33 highlight that hybridising these membrane processes with existing nutrient precipitation 34 process will lead to better management of and more diverse pathways for near complete 35 nutrient recovery in wastewater treatment facilities. 36 3

In this paper, the performance of various membranes were assessed in direct contact membrane distillation (DCMD) under different feed velocities and inlet temperatures. The membranes studied included a polyvinylidenefluoride (PVDF) microfiltration membrane with a non-woven support layer, a polytetrafluoroethylene (PTFE) microfiltration membrane with a non-woven support layer, and three MD membranes made from PTFE of different pore size and all with a structured scrim support layer. The results showed that distillation using PTFE membranes produced much higher flux than that of the PVDF microfiltration membrane at the same operational conditions, and the support layer affected not only the flux, but also the energy efficiency (0.51 -0.24). The results also show that increasing the velocity of the feed and its inlet temperature increased the flux, but the rate of flux increase diminishes at high velocities. The mass transfer coefficient improved for thinner support and active layer membranes, leading to fluxes as high as 46 L.m -2 h -1 at 80˚C. The heat transfer characteristics were found to be superior for the open scrim backed membranes compared to the non-woven support membranes, resulting in significantly greater thermal efficiency for the scrim backed membranes.