Abstract. Detailed studies of snow cover processes require models that offer a fine description of the snow cover properties. The detailed snowpack model Crocus is such a scheme, and has been run operationally for avalanche forecasting over the French mountains for 20 yr. It is also used for climate or hydrological studies. To extend its potential applications, Crocus has been recently integrated within the framework of the externalized surface module SURFEX. SURFEX computes the exchanges of energy and mass between different types of surface and the atmosphere. It includes in particular the land surface scheme ISBA (Interactions between Soil, Biosphere, and Atmosphere). It allows Crocus to be run either in stand-alone mode, using a time series of forcing meteorological data or in fully coupled mode (explicit or fully implicit numerics) with atmospheric models ranging from meso-scale models to general circulation models. This approach also ensures a full coupling between the snow cover and the soil beneath. Several applications of this new simulation platform are presented. They range from a 1-D standalone simulation (Col de Porte, France) to fully-distributed simulations in complex terrain over a whole mountain range (Massif des Grandes Rousses, France), or in coupled mode such as a surface energy balance and boundary layer simulation over the East Antarctic Ice Sheet (Dome C).
Abstract. SURFEX is a new externalized land and ocean surface platform that describes the surface fluxes and the evolution of four types of surfaces: nature, town, inland water and ocean. It is mostly based on pre-existing, well-validated scientific models that are continuously improved. The motivation for the building of SURFEX is to use strictly identical scientific models in a high range of applications in order to mutualise the research and development efforts. SURFEX can be run in offline mode (0-D or 2-D runs) or in coupled mode (from mesoscale models to numerical weather prediction and climate models). An assimilation mode is included for numerical weather prediction and monitoring. In addition to momentum, heat and water fluxes, SURFEX is able to simulate fluxes of carbon dioxide, chemical species, continental aerosols, sea salt and snow particles. The main principles of the organisation of the surface are described first. Then, a survey is made of the scientific module (including the coupling strategy). Finally, the main applications of the code are summarised. The validation work undertaken shows that replacing the pre-existing surface models by SURFEX in these applications is usually associated with improved skill, as the numerous scientific developments contained in this community code are used to good advantage.
Abstract. The overall objective of the present study is to introduce the new ECOCLIMAP-II database for Europe, which is an upgrade for this region of the former initiative, ECOCLIMAP-I, already implemented at global scale. The ECOCLIMAP programme is a dual database at 1 km resolution that includes an ecosystem classification and a coherent set of land surface parameters that are primarily mandatory in meteorological modelling (notably leaf area index and albedo). Hence, the aim of this innovative physiography is to enhance the quality of initialisation and impose some surface attributes within the scope of weather forecasting and climate related studies. The strategy for implementing ECOCLIMAP-II is to depart from prevalent land cover products such as CLC2000 (Corine Land Cover) and GLC2000 (Global Land Cover) by splitting existing classes into new classes that possess a better regional character by virtue of the climatic environment (latitude, proximity to the sea, topography). The leaf area index (LAI) from MODIS and normalized difference vegetation index (NDVI) from SPOT/Vegetation (a global monitoring system of vegetation) yield the two proxy variables that were considered here in order to perform a multi-year trimmed analysis between 1999 and 2005 using the K-means method. Further, meteorological applications require each land cover type to appear as a partition of fractions of 4 main surface types or tiles (nature, water bodies, sea, urban areas) and, inside the nature tile, fractions of 12 plant functional types (PFTs) representing generic vegetation types -principally broadleaf forest, needleleaf forest, C3 and C4 crops, grassland and bare land -as incorporated by the SVAT model ISBA (Interactions Surface Biosphere Atmosphere) developed at Météo France. This landscape division also forms the cornerstone of a validation exercise. The new ECOCLIMAP-II can be verified with auxiliary land cover products at very fine and coarse resolutions by means of versatile land occupation nomenclatures.
ISI Document Delivery No.: 918JZ Times Cited: 22 Cited Reference Count: 80 Cited References: Alkama M. R., 2008, CLIM DYNAM, V30, P855 Alkama R, 2010, J HYDROMETEOROL, V11, P583, DOI 10.1175/2010JHM1211.1 Alsdorf DE, 2007, REV GEOPHYS, V45, DOI 10.1029/2006RG000197 Arora VK, 1999, J GEOPHYS RES-ATMOS, V104, P14347, DOI 10.1029/1999JD900200 Arora VK, 1999, J GEOPHYS RES-ATMOS, V104, P30965, DOI 10.1029/1999JD900905 Barnes HH, 1967, US GEOLOGICAL SURVEY, P213 Beighley RE, 2009, HYDROL PROCESS, V23, P1221, DOI 10.1002/hyp.7252 Beven KJ, 1979, HYDROL SCI B, V24, P43, DOI [10.1080/02626667909491834, DOI 10.1080/02626667909491834] Boone A, 2000, J APPL METEOROL, V39, P1544, DOI 10.1175/1520-0450(2000)039<1544:TIOTIO>2.0.CO;2 Bousquet P, 2006, NATURE, V443, P439, DOI 10.1038/nature05132 Chapelon N, 2002, CLIM DYNAM, V19, P141, DOI 10.1007/s00382-001-0213-9 Coe M. T., 2002, Journal of Geophysical Research, V107, DOI 10.1029/2001JD000740 Coe MT, 2008, HYDROL PROCESS, V22, P2542, DOI 10.1002/hyp.6850 Coe MT, 1998, J GEOPHYS RES-ATMOS, V103, P8885, DOI 10.1029/98JD00347 Cogley J. G., 2003, 20031 TRENT U DEP GE Dadson SJ, 2010, J GEOPHYS RES-ATMOS, V115, DOI 10.1029/2010JD014474 Decharme B, 2007, CLIM DYNAM, V29, P21, DOI 10.1007/s00382-006-0216-7 Decharme B, 2006, CLIM DYNAM, V26, P65, DOI 10.1007/s00382-005-0059-7 Decharme B, 2008, J GEOPHYS RES-ATMOS, V113, DOI 10.1029/2007JD009376 Decharme B, 2010, J HYDROMETEOROL, V11, P601, DOI 10.1175/2010JHM1212.1 Decharme B, 2006, J HYDROMETEOROL, V7, P61, DOI 10.1175/JHM469.1 Decharme B, 2006, CLIM DYNAM, V27, P695, DOI 10.1007/s00382-006-0160-6 Dirmeyer PA, 2000, J CLIMATE, V13, P2900, DOI 10.1175/1520-0442(2000)013<2900:UAGSWD>2.0.CO;2 Dirmeyer PA, 2001, J HYDROMETEOROL, V2, P89, DOI 10.1175/1525-7541(2001)002<0089:CDIACL>2.0.CO;2 Douville H, 2000, J GEOPHYS RES-ATMOS, V105, P14841, DOI 10.1029/1999JD901086 Douville H, 2004, CLIM DYNAM, V22, P429, DOI 10.1007/s00382-003-0386-5 Douville H, 2000, MON WEATHER REV, V128, P1733, DOI 10.1175/1520-0493(2000)128<1733:EOTOIA>2.0.CO;2 Douville H, 2003, J HYDROMETEOROL, V4, P1044, DOI 10.1175/1525-7541(2003)004<1044:ATIOSM>2.0.CO;2 Ducharne A, 2003, J HYDROL, V280, P207, DOI 10.1016/S0022-1694(03)00230-0 Durand F, 2010, J EARTH SYST SCI Fan Y, 2011, CLIM DYNAM, V37, P253, DOI 10.1007/s00382-010-0829-8 Fan Y, 2007, J GEOPHYS RES-ATMOS, V112, DOI 10.1029/2006JD008111 *FAO IIASA ISRIC I, 2009, HARM WORLD SOIL DAT Fekete BM, 2004, J CLIMATE, V17, P294, DOI 10.1175/1520-0442(2004)017<0294:UIPATI>2.0.CO;2 Frappart F, 2010, HYDROL EARTH SYST SC, V14, P2443, DOI 10.5194/hess-14-2443-2010 Gedney N, 2004, GEOPHYS RES LETT, V31, DOI 10.1029/2004GL020919 Gedney N, 2000, J CLIMATE, V13, P3066, DOI 10.1175/1520-0442(2000)013<3066:CGLSST>2.0.CO;2 Guntner A, 2007, WATER RESOUR RES, V43, DOI 10.1029/2006WR005247 Hagemann S, 1998, CLIM DYNAM, V14, P17, DOI 10.1007/s003820050205 Hansen MC, 2000, INT J REMOTE SENS, V21, P1331, DOI 10.1080/014311600210209 Houweling S, 1999, J GEOPHYS RES-ATMOS, V104, P26137, DOI 10.1029/1999JD900428 Knighton E, 1998, FLUVIAL FO...
Abstract. In this study, a global land data assimilation system (LDAS-Monde) is applied over Europe and the Mediterranean basin to increase monitoring accuracy for land surface variables. LDAS-Monde is able to ingest information from satellite-derived surface soil moisture (SSM) and leaf area index (LAI) observations to constrain the interactions between soil–biosphere–atmosphere (ISBA, Interactions between Soil, Biosphere and Atmosphere) land surface model (LSM) coupled with the CNRM (Centre National de Recherches Météorologiques) version of the Total Runoff Integrating Pathways (ISBA-CTRIP) continental hydrological system. It makes use of the CO2-responsive version of ISBA which models leaf-scale physiological processes and plant growth. Transfer of water and heat in the soil rely on a multilayer diffusion scheme. SSM and LAI observations are assimilated using a simplified extended Kalman filter (SEKF), which uses finite differences from perturbed simulations to generate flow dependence between the observations and the model control variables. The latter include LAI and seven layers of soil (from 1 to 100 cm depth). A sensitivity test of the Jacobians over 2000–2012 exhibits effects related to both depth and season. It also suggests that observations of both LAI and SSM have an impact on the different control variables. From the assimilation of SSM, the LDAS is more effective in modifying soil moisture (SM) from the top layers of soil, as model sensitivity to SSM decreases with depth and has almost no impact from 60 cm downwards. From the assimilation of LAI, a strong impact on LAI itself is found. The LAI assimilation impact is more pronounced in SM layers that contain the highest fraction of roots (from 10 to 60 cm). The assimilation is more efficient in summer and autumn than in winter and spring. Results shows that the LDAS works well constraining the model to the observations and that stronger corrections are applied to LAI than to SM. A comprehensive evaluation of the assimilation impact is conducted using (i) agricultural statistics over France, (ii) river discharge observations, (iii) satellite-derived estimates of land evapotranspiration from the Global Land Evaporation Amsterdam Model (GLEAM) project and (iv) spatially gridded observation-based estimates of upscaled gross primary production and evapotranspiration from the FLUXNET network. Comparisons with those four datasets highlight neutral to highly positive improvement.
Detailed studies of snow cover processes require models that offer a fine description of the snow cover properties. The detailed snowpack model Crocus is such a scheme, and has been run operationally for avalanche forecasting over the French mountains for 20 years. It is also used for climate or hydrological studies. To extend its potential applications, Crocus has been recently integrated within the framework of the externalized surface module SURFEX. SURFEX computes the exchanges of energy and mass between different types of surface, and the atmosphere and includes in particular the land surface scheme ISBA (Interactions between Soil, Biosphere, and Atmosphere). It allows Crocus to be run either in stand-alone mode, using a time series of forcing meteorological data or in fully coupled mode (explicit or fully implicit numerics) with atmospheric models ranging from meso-scale models to general circulation models. This approach also insures a full coupling between the snow cover and the soil beneath. Several applications of this new simulation platform are presented. They range from a 1D stand-alone simulation (Col de Porte, France) to fully-distributed simulations in complex terrain, either in forced mode over a whole mountain range (Massif des Grandes Rousses, France), or in coupled mode such as a snow transport simulation (Col du Lac Blanc, France), or a surface energy balance and boundary layer simulation over a polar ice cap (Dome C, Antarctica)
[1] The lower boundary condition of soil in land surface models is a key parameter, which can affect the energy and water budget at the surface/atmosphere interface. Indeed, it affects the thermal inertia of the ground as well as the water fluxes from the subsurface to the river-aquifer system. In land surface models, it is well known that the soil must be sufficiently deep to compute a realistic soil temperature profile, while in terms of hydrology, the soil column should be substantially thinner in order to simulate realistic river discharges and therefore surface fluxes. In addition to the confirmation of this paradox, the goal of this study is to show how it is solved in the Interaction between Soil Biosphere Atmosphere (ISBA) land surface model. To reconcile hydrological and thermal lower boundary conditions, a simple approach is developed in which the soil temperature profile is extended below the hydrological column of the soil, and the water profile is extrapolated at each thermal node as the depth increases. ISBA is applied across France over 20 years and at a relatively high resolution. Additional experiments are also performed using the same lower boundary conditions of 1, 2, 3, 5, and 12 m for hydrological and thermal equations. The simulated river discharges and temperature profiles are compared to a dense network of in situ observations. The results confirm the paradox addressed previously and demonstrate that, if left unsolved, it could lead to poor simulation of the soil water and energy budgets, potentially affecting the performance of forecast studies, hydrological applications, and/or climate modeling.Citation: Decharme, B., E. Martin, and S. Faroux (2013), Reconciling soil thermal and hydrological lower boundary conditions in land surface models,
SURFEX is a new externalized land and ocean surface platform that describes the surface fluxes and the evolution of four types of surface: nature, town, inland water and ocean. It can be run either coupled or in offline mode. It is mostly based on pre-existing, well validated scientific models. It can be used in offline mode (from point scale to global runs) or fully coupled with an atmospheric model. SURFEX is able to simulate fluxes of carbon dioxide, chemical species, continental aerosols, sea salt and snow particles. It also includes a data assimilation module. The main principles of the organization of the surface are described first. Then, a survey is made of the scientific module (including the coupling strategy). Finally the main applications of the code are summarized. The current applications are extremely diverse, ranging from surface monitoring and hydrology to numerical weather prediction and global climate simulations. The validation work undertaken shows that replacing the pre-existing surface models by SURFEX in these applications is usually associated with improved skill, as the numerous scientific developments contained in this community code are used to good advantage
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.