No abstract

Marine macroalgae represent a rich source of bioactive compounds that can be implemented in various food, cosmetic, and pharmaceutical products for health improvement. It has been proven that these bioactive compounds, such as polyphenols, polysaccharides, carotenoids, and ω-3 fatty acids possess bioactivity. For the extraction of these compounds, modern methods (Supercritical Fluid Extraction (SFE), Subcritical Water Extraction (SWE), Ultrasound-Assisted Extraction (UAE), and Microwave-Assisted Extraction (MAE)) have been used due to their advantages over the conventional methods. The process parameters of each method must be optimized for obtaining the extracts with the targeted bioactive compounds. In distinction from the existing reviews, the present review provides novelty with respect to: (a) presenting systematically the selected process parameters of SFE (temperature, time, pressure, use of co-solvents), SWE (temperature, time, pressure, solid-solvent ratio), UAE (temperature, time, frequency, power, solid-solvent ratio), and MAE (temperature, time, frequency, power, solvent type) applied for the extractions of marine macroalgae; (b) reporting the major groups or individual compounds extracted with their biological activities (if determined); and, (c) updating available references.

No abstract

In many industrial processes, large quantities of volatile and flammable organic solvents are used in various reaction systems and separation steps defining a major part of the environmental and economic performance of a process. Accordingly, a growing area of research in the development of green technologies is devoted to designing new, environmentally-friendly and tunable solvents the use of which would meet both technological and economic demands. Among proposed solvents, room temperature ionic liquids, supercritical and subcritical fluids and solvents from natural and renewable sources stand out as the most promising approaches for current solvent innovation. A brief overview of up-to-date knowledge regarding these solvents is presented herein, with special emphasis on their properties, applications and further perspectives as truly green industrial solvents.

Jokić S., Velić D., Bilić M., Bucić-Kojić A., Planinić M., Tomas S. (2010): Modelling of the process of solid-liquid extraction of total polyphenols from soybeans. Czech J. Food Sci., 28: 206-212.The influence of the solvent, temperature, and extraction time on the extractability of total polyphenols from milled soybeans variety Ika was investigated. The study was performed in order to select the most suitable solvent (water; 50, 60, 70, and 80% aqueous ethanol) for achieving the highest yield of total polyphenols. The most effective solvent (50% aqueous ethanol solution) was used for monitoring the kinetics and modelling of solid-liquid extraction of total polyphenols from soybeans, average particle size 0.459 mm, at solid-liquid ratio of 20 ml/g (ratio of the solvent volume per g of raw material). The total polyphenols content in the soybean extract was determined spectrophotometrically using Folin-Ciocalteu micro-methods at 765 nm. The applicability of different mathematical models (Peleg, Page, and Logarithmic models) to describe the kinetics of the solid-liquid extraction process of total polyphenols from soybeans was studied as well. The results exhibited a significant influence of the solvent and temperature on the kinetics and extraction yield of total polyphenols from soybeans. The best extraction yield of total polyphenols was obtained using 50% aqueous ethanol solution at 80°C after 120 min (4.322 mg GAE/g db ). The extraction yield of total polyphenols in soybean extracts increased by increasing the extraction temperature and extending the duration of the extraction process. The mathematical models applied showed a good agreement with the experimental results, which allows their application in modelling and optimisation of solid-liquid extraction process for the extraction of total polyphenols from soybeans.

No abstract

Salvia officinalis L., also known as the “Salvation Plant”, has been long used and well-documented in traditional medicine around the globe. Its bioactive compounds, and especially its polyphenol profile, have been extensively researched and reviewed. However, sage’s beneficial effects reach much further, and nowadays, with a range of new extraction techniques, we are discovering new components with new therapeutic effects, especially in the context of neurodegenerative diseases and various carcinomas. This review describes the bioactive profile of various sage preparations depending on the extraction techniques and extraction parameters, and this review lists the newest research findings on its health effects.

Starch has been an inexhaustible subject of research for many decades. It is an inexpensive, readily-available material with extensive application in the food and processing industry. Researchers are continually trying to improve its properties by different modification procedures and expand its application. What is mostly applied in this view are their chemical modifications, among which organic acids have recently drawn the greatest attention, particularly with respect to the application of starch in the food industry. Namely, organic acids naturally occur in many edible plants and many of them are generally recognized as safe (GRAS), which make them ideal modification agents for starch intended for the food industry. The aim of this review is to give a short literature overview of the progress made in the research of starch esterification, etherification, cross-linking, and dual modification with organic acids and their derivatives.