A great interest has recently been focused on lycopene and β-carotene, because of their antioxidant action in the organism. Red-flesh watermelon is one of the main sources of lycopene as the most abundant carotenoid. The use of near-infrared spectroscopy (NIRS) in post-harvesting has permitted us to rapidly quantify lycopene, β-carotene, and total soluble solids (TSS) on single intact fruits. Watermelons, harvested in 2013–2015, were submitted to near-infrared (NIR) radiation while being transported along a conveyor belt system, stationary and in movement, and at different positions on the belt. Eight hundred spectra from 100 samples were collected as calibration set in the 900–1700 nm interval. Calibration models were performed using partial least squares (PLS) regression on pre-treated spectra (derivatives and SNV) in the ranges 2.65–151.75 mg/kg (lycopene), 0.19–9.39 mg/kg (β-carotene), and 5.3%–13.7% (TSS). External validation was carried out with 35 new samples and on 35 spectra. The PLS models for intact watermelon could predict lycopene with R2 = 0.877 and SECV = 15.68 mg/kg, β-carotene with R2 = 0.822 and SECV = 0.81 mg/kg, and TSS with R2 = 0.836 and SECV = 0.8%. External validation has confirmed predictive ability with R2 = 0.805 and RMSEP = 16.19 mg/kg for lycopene, R2 = 0.737 and RMSEP = 0.96 mg/kg for β-carotene, and R2 = 0.707 and RMSEP = 1.4% for TSS. The results allow for the market valorization of fruits.
The yeast Candida tropicalis DSM 7524 produces xylitol, a natural, low-calorie sweetener, by fermentation of xylose. In order to increase xylitol production rate during the submerged fermentation process, some parameters-substrate (xylose) concentration, pH, aeration rate, temperature and fermentation strategy-have been optimized. The maximum xylitol yield reached at 60–80 g/L initial xylose concentration, pH 5.5 at 37 °C was 83.66% (w/w) on consumed xylose in microaerophilic conditions (kLa = 2·h−1). Scaling up on 3 L fermenter, with a fed-batch strategy, the best xylitol yield was 86.84% (w/w), against a 90% of theoretical yield. The hyper-acidophilic behaviour of C. tropicalis makes this strain particularly promising for industrial application, due to the possibility to work in non-sterile conditions.
The biotransformations of hyodeoxycholic acid with various Rhodococcus spp. are reported. Some strains (i.e., Rhodococcus zopfii, Rhodococcus ruber, and Rhodococcus aetherivorans) are able to partially degrade the side chain at C(17) to afford 6a-hydroxy-3-oxo-23,24-dinor-5b-cholan-22-oic acid (2; 23%) and 6a-hydroxy-3-oxo-23,24-dinorchol-1,4-dien-22-oic acid (3; 23 -30%), together with two new 9,10-secosteroids 4 and 5 (10 -45%), still bearing the partial side chain at C(17) and adopting an intramolecular hemiacetal form. In addition, the 9,10-secosteroid 5 showed an unprecedented C(4)hydroxylation. The new secosteroids were fully characterized by MS, IR, NMR, and 2D-NMR analyses. Fig. 1. Structure of bile acids Scheme. Biotransformation Pathway of Hydeoxycholic Acid (1) with Rhodococcus spp.
Sorbic acid is the most commonly used preservative in the food industry. The antimicrobial inhibition of sorbic acid could be influenced by its lipophilic nature, which reduces its use in hydrophilic food formulations. Reactions between sorbic acid and glycerol catalyzed by lipases were studied in order to develop a novel sorbic acid derivate with a promising hydrophilic profile. The esterification reaction between sorbic acid and glycerol in a solvent-free system were performed with an immobilized lipase B from Candida antarctica (CALB). The glycerol sorbate product has been tested against S. griseus bacterium and Saccharomyces cerevisiae yeast. Results indicate that the esterification of sorbic acid with glycerol does improve its antimicrobial properties against Saccharomyces cerevisie. The reported results demonstrate that esterification can be used as a strategy to improve the antimicrobial activity of sorbic acid.
Valuable biomass conversion processes are highly dependent on the use of effective pretreatments for lignocellulose degradation and enzymes for saccharification. Among the nowadays available treatments, chemical delignification represents a promising alternative to physical-mechanical treatments. Banana is one of the most important fruit crops around the world. After harvesting, it generates large amounts of rachis, a lignocellulosic residue, that could be used for second generation ethanol production, via saccharification and fermentation. In the present study, eight chemical pretreatments for lignin degradation (organosolv based on organic solvents, sodium hypochlorite, hypochlorous acid, hydrogen peroxide, alkaline hydrogen peroxide, and some combinations thereof) have been tested on banana rachis and the effects evaluated in terms of lignin removal, material losses, and chemical composition of pretreated material. Pretreatment based on lignin oxidation have demonstrated to reach the highest delignification yield, also in terms of monosaccharides recovery. In fact, all the delignified samples were then saccharified with enzymes (cellulase and beta-glucosidase) and hydrolysis efficiency was evaluated in terms of final sugars recovery before fermentation. Analysis of Fourier transform infrared spectra (FTIR) has been carried out on treated samples, in order to better understand the structural effects of delignification on lignocellulose. Active chlorine oxidations, hypochlorous acid in particular, were the best effective for lignin removal obtaining in the meanwhile the most promising cellulose-to-glucose conversion.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.