The Digital Cherenkov Viewing Device (DCVD) [5] is a tool used by nuclear safeguards inspectors to verify irradiated nuclear fuel assemblies in wet storage based on the Cherenkov light produced by the assembly. Verifying that no rods have been substituted in the fuel, so-called partialdefect verification, is done by comparing the intensity measured with a DCVD with a predicted intensity, based on operator fuel declaration. The prediction model currently used by inspectors is based on simulations of Cherenkov light production in a BWR 8x8 geometry. This work investigates prediction models based on simulated Cherenkov light production in a BWR 8x8 and a PWR 17x17 assembly, as well as a simplified model based on a single rod in water. Cherenkov light caused by both fission product gamma and beta decays was considered. The simulations reveal that there are systematic differences between the model used by safeguards inspectors and the models described in this publication, most noticeably with respect to the fuel assembly cooling time. Consequently, if the intensity predictions are based on another fuel type than the fuel type being measured, a systematic bias in intensity with respect to burnup and cooling time is introduced. While a simplified model may be accurate enough for a set of fuel assemblies with nearly identical cooling times, the prediction models may differ systematically by up to 18 % for fuels with more varied cooling times. Accordingly, these investigations indicate that the currently used model may need to be exchanged with a set of more detailed, fuel-type specific models, in order minimize the model dependent systematic deviations.

No abstract

No abstract

Safeguards verification of irradiated nuclear fuel assemblies in wet storage is frequently done by measuring the Cherenkov light in the surrounding water produced due to radioactive decays of fission products in the fuel. This paper accounts for the physical processes behind the Cherenkov light production caused by a single fuel rod in wet storage, and simulations are presented that investigate to what extent various properties of the rod affect the Cherenkov light production. The results show that the fuel properties has a noticeable effect on the Cherenkov light production, and thus that the prediction models for Cherenkov light production which are used in the safeguards verifications could potentially be improved by considering these properties.It is concluded that the dominating source of the Cherenkov light is gamma-ray interactions with electrons in the surrounding water. Electrons created from beta decay may also exit the fuel and produce Cherenkov light, and e.g. Y-90 was identified as a possible contributor to significant levels of the measurable Cherenkov light in long-cooled fuel. The results also show that the cylindrical, elongated fuel rod geometry results in a non-isotropic Cherenkov light production, and the light component parallel to the rod's axis exhibits a dependence on gamma-ray energy that differs from the total intensity, which is of importance since the typical safeguards measurement situation observes the vertical light component. It is also concluded that the radial distributions of the radiation sources in a fuel rod will affect the Cherenkov light production.

On the inclusion of light transport in prediction tools for Cherenkov light intensity assessment of irradiated nuclear fuel assemblies

No abstract

No abstract

No abstract