The processing of gold by cyanidation has an impact on the release of free cyanide into the environment contained in the tailings. Free cyanide is very dangerous because it has very high toxicity. The process to remove free cyanide from tailings is the oxidation-precipitation using a mixture of sulfur and oxygen catalyzed by copper (II). This process can reduce the concentration of free cyanide as well as heavy metals. Free cyanide is oxidized to cyanate and heavy metals are deposited as metal-hydroxide. The optimum parameter of these methods on tailing cyanidation from gold ore Lebak Situ Village-Lebak Gedong District-Lebak Regency-Banten province are the ratio of the weight of SO2/CN- is 7; the catalyst dose is 75 mg/L; pH is 9 and the processing time is 4 hours. Application tests of the optimum parameter were able to reduce free cyanide concentration from 95.8 mg/L to 0.25 mg/L. Wastewater from the processing with this process has fulfilled the specified Quality Standards. The wastewater pollution index value before the treatment process is 136.32, changing to 0.36 after processing. These changes indicate that the oxidation-precipitation process has been able to change the condition of cyanidation wastewater from heavily polluted to better conditions.Keywords: cyanidation, tailing, oxidation, optimum parameter, aplication test, pollution index ABSTRAKPengolahan emas dengan sianidasi berdampak pada pelepasan sianida bebas ke lingkungan yang terkandung di dalam tailing. Sianida bebas sangat berbahaya karena mempunyai toksisitas yang sangat tinggi. Salah satu proses untuk menghilangkan sianida bebas dari tailing adalah oksidasi-presipitasi menggunakan campuran gas sulfur dan oksigen terkatalisis tembaga (II). Proses ini mampu menurunkan konsentrasi sianida bebas sekaligus logam berat. Sianida bebas dioksidasi menjadi sianat dan logam berat diendapkan sebagai logam-hidroksida. Parameter optimum proses tersebut pada tailing sianidasi bijih emas Lebak Situ Kecamatan Lebak Gedong Kabupaten Lebak Provinsi Banten adalah rasio berat SO2/CN- 7; dosis katalis 75 mg/L; pH pengolahan 9 dan waktu pengolahan 4 jam. Uji aplikasi parameter optimum tersebut mampu menurunkan konsentrasi sianida bebas dari 95,8 mg/L menjadi 0,25 mg/L. Air limbah hasil pengolahan dengan proses tersebut telah memenuhi Baku Mutu yang ditetapkan. Nilai indeks pencemaran air limbah sebelum proses pengolahan adalah 136,32 berubah menjadi 0,36 setelah dilakukan proses pengolahan. Perubahan tersebut menunjukkan bahwa proses oksidasi-presipitasi telah mampu mengubah kondisi air limbah sianidasi dari tercemar berat menjadi kondisi lebih baik.Kata kunci: sianidasi, tailing, oksidasi, parameter optimum, uji aplikasi, indeks pencemaran
Meskipun memiliki dampak positif terhadap perekonomian masyarakat, kegiatan Pertambangan Emas Skala Kecil (PESK) khususnya di Kabupaten Lebak, telah meningkatkan kadar merkuri pada lingkungan hingga melebihi ambang batas yang ditetapkan. Guna mengurangi pencemaran merkuri, Pemerintah Kabupaten Lebak menetapkan program pengurangan dan penghapusan merkuri pada sektor PESK. Program tersebut dapat dikatakan efektif jika adanya penurunan penggunaan merkuri di PESK. Oleh karena itu, studi inventarisasi penggunaan merkuri pada PESK dilaksanakan untuk mengetahui jumlah penggunaan merkuri sebelum adanya penerapan program tersebut, khususnya di Kecamatan Bayah yang memiliki kegiatan PESK. Inventarisasi merkuri dilakukan dengan metode survei lapangan serta pengukuran dan perhitungan neraca massa secara langsung. Hasil studi menunjukkan bahwa Jumlah lokasi pengolahan emas yang menggunakan merkuri di Kecamatan Bayah adalah 524 lokasi dimana 186 lokasi tidak aktif dan 338 lokasi masih aktif. Dari 338 lokasi pengolahan aktif di Kec. Bayah, jumlah merkuri yang digunakan adalah sebesar 5.017,43 Kg/tahun atau 5,017 ton/tahun. Selain itu, diketahui pula bahwa penggunaan merkuri di Kec. Bayah menghasilkan emisi udara sebanyak 822,25 Kg/tahun.
The Indonesian government is committed to protecting the public from the dangers of mercury. One of the attempts planned is to withdraw mercury medical devices from all health facilities. Storage and monitoring of these medical devices must also be carried out properly and follow mercury handling procedures through mercury interim storage facilities. In building Mercury Interim Storage (MIS), several things need to be designed, including storage areas, ventilation systems, office areas, leak containers, and storage shelves. All of these designs must meet the guidelines and criteria to store mercury safely before being stored in a final storage. In this study, Mercury Interim Storage is designed to keep thermometers and sphygmomanometers, which is estimated to accommodate 10,000 and 1,900 units, respectively.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.