Asphaltenes are surface-active polyaromatic molecules in crude oil that are known to deposit in pipelines or stabilize water droplets by flocculating at interfaces resulting highly viscous emulsions, leading to significant flow assurance problems. Commercial dispersants have been developed to disturb asphaltene aggregation to mitigate deposition, but their role on the interfacial properties of asphaltene films is unclear. In this study, we elucidate asphaltene interfacial rheology at air-water and oil-water interfaces at high and low asphaltene surface coverage and in the presence of dispersants. A modified Langmuir trough with double-wall ring rheometer is used to simultaneously visualize the microstructure of asphaltene interface and measure the rheological responses. Two surface coverages, 0.5 and 4 lg cm À2 , show widely different rheological responses at air-water interfaces. Strong yielding behavior was observed for higher coverage while a less yielding behavior and wider linear viscoelastic regime were observed for the lower coverage. Additionally, asphaltenes at decane-water interfaces were less shear-thinning than at air-water interfaces. Surface pressure-area compression-expansion curves show that the interface is more compressible in the presence of commercial chemical dispersants. This combined imaging and interfacial rheology platform provide an effective method to correlate asphaltene microstructure to interfacial rheological properties. V

The study of particle laden interfaces has increased significantly due to the increasing industrial use of particle stabilized foams and Pickering emulsions, whose bulk rheology and stability are highly dependent on particle laden interface's interfacial rheology, which is a function of interfacial microstructure. To understand the physical mechanisms that dictate interfacial rheology of particle laden interfaces requires correlating rheology to microstructure. To achieve this goal, a double wall ring interfacial rheometer has been modified to allow real time, simultaneous interfacial visualization and shear rheology measurements. The development of this tool is outlined, and its ability to provide novel and unique measurements is demonstrated on a sample system. This tool has been used to examine the role of microstructure on the steady shear rheology of densely packed, aggregated particle laden interfaces at three surface concentrations. Through examination of the rheology and analysis of interfacial microstructure response to shear, a transition from shear thinning due to aggregated cluster breakup to yielding at a slip plane within the interface has been identified. Interestingly, it is found that aggregated interfaces transition to yielding well before they reached a jammed state. Furthermore, these systems undergo significant shear induced order when densely packed. These results indicate that the mechanics of these interfaces are not simply jammed or unjammed and that the interfacial rheology relationship with microstructure can give us significant insight into understanding how to engineer particle laden interfaces in the future. By examining both rheology and microstructure, the mechanisms that dictate observed rheology are now understood and can be used to predict and control the rheology of the interface.

Recent measurements have implied a distribution of interfacially adsorbed particles' contact angles; however, it has been impossible to measure statistically significant numbers for these contact angles noninvasively in situ. Using a new microscopy method that allows nanometer-scale resolution of particle's 3D positions on an interface, we have measured the contact angles for thousands of latex particles at an oil/water interface. Furthermore, these measurements are dynamic, allowing the observation of the particle contact angle with high temporal resolution, resulting in hundreds of thousands of individual contact angle measurements. The contact angle has been found to fit a normal distribution with a standard deviation of 19.3°, which is much larger than previously recorded. Furthermore, the technique used allows the effect of measurement error, constrained interfacial diffusion, and particle property variation on the contact angle distribution to be individually evaluated. Because of the ability to measure the contact angle noninvasively, the results provide previously unobtainable, unique data on the dynamics and distribution of the adsorbed particles' contact angle.

No abstract

Capillary pressure across a 50 μm bubble in a glass capillary is oscillated to measure the dynamic surface tension of lysolipids.