Oxygen plasma treatment of poly(dimethylsiloxane) (PDMS) thin films produced a hydrophilic surface that was biocompatible and resistant to biofouling in microfluidic studies. Thin film coatings of PDMS were previously developed to provide protection for semiconductor-based microoptical devices from rapid degradation by biofluids. However, the hydrophobic surface of native PDMS induced rapid clogging of microfluidic channels with glial cells. To evaluate the various issues of surface hydrophobicity and chemistry on material biocompatibility, we tested both native and oxidized PDMS (ox-PDMS) coatings as well as bare silicon and hydrophobic alkane and hydrophilic oligoethylene glycol silane monolayer coated under both cell culture and microfluidic studies. For the culture studies, the observed trend was that the hydrophilic surfaces supported cell adhesion and growth, whereas the hydrophobic ones were inhibitive. However, for the fluidic studies, a glass-silicon microfluidic device coated with the hydrophilic ox-PDMS had an unperturbed flow rate over 14 min of operation, whereas the uncoated device suffered a loss in rate of 12%, and the native PDMS coating showed a loss of nearly 40%. Possible protein modification of the surfaces from the culture medium also were examined with adsorbed films of albumin, collagen, and fibrinogen to evaluate their effect on cell adhesion.

We investigate optoelectronic properties of integrated structures comprising semiconductor light-emitting materials for optical probes of microscopic biological systems. Compound semiconductors are nearly ideal light emitters for probing cells and other microorganisms because of their spectral match to the transparency wavelengths of biomolecules. Unfortunately, the chemical composition of these materials is incompatible with the biochemistry of cells and related biofluids. To overcome these limitations, we investigate functionalized semiconductor surfaces and structures to simultaneously enhance light emission and the flow of biological fluids in semiconductor microcavities. We have identified several important materials problems associated with the semiconductor/biosystem interface. One is the biofluid degradation of electroluminescence by ionic diffusion into compound semiconductors. Ions that diffuse into the active region of a semiconductor light emitter can create point defects that degrade the quantum efficiency of the radiative recombination process. In this paper we discuss ways of mitigating these problems using materials design and surface chemistry, and suggest future applications for these materials.

No abstract