Oxygen plasma treatment of poly(dimethylsiloxane) (PDMS) thin films produced a hydrophilic surface that was biocompatible and resistant to biofouling in microfluidic studies. Thin film coatings of PDMS were previously developed to provide protection for semiconductor-based microoptical devices from rapid degradation by biofluids. However, the hydrophobic surface of native PDMS induced rapid clogging of microfluidic channels with glial cells. To evaluate the various issues of surface hydrophobicity and chemistry on material biocompatibility, we tested both native and oxidized PDMS (ox-PDMS) coatings as well as bare silicon and hydrophobic alkane and hydrophilic oligoethylene glycol silane monolayer coated under both cell culture and microfluidic studies. For the culture studies, the observed trend was that the hydrophilic surfaces supported cell adhesion and growth, whereas the hydrophobic ones were inhibitive. However, for the fluidic studies, a glass-silicon microfluidic device coated with the hydrophilic ox-PDMS had an unperturbed flow rate over 14 min of operation, whereas the uncoated device suffered a loss in rate of 12%, and the native PDMS coating showed a loss of nearly 40%. Possible protein modification of the surfaces from the culture medium also were examined with adsorbed films of albumin, collagen, and fibrinogen to evaluate their effect on cell adhesion.

Oxidation of exfoliated gallium selenide (GaSe) is investigated through Raman, photoluminescence, Auger, and X-ray photoelectron spectroscopies. Photoluminescence and Raman intensity reductions associated with spectral features of GaSe are shown to coincide with the emergence of signatures emanating from the by-products of the oxidation reaction, namely, Ga2Se3 and amorphous Se. Photoinduced oxidation is initiated over a portion of a flake highlighting the potential for laser based patterning of two-dimensional heterostructures via selective oxidation.

Ion-beam processing effects on the thermal conductivity of n-GaN/sapphire (0001) High spatial resolution thermal conductivity and Raman spectroscopy investigation of hydride vapor phase epitaxy grown n -GaN/sapphire (0001): Doping dependenceThe thermal conductivity of n-and p-type doped gallium nitride (GaN) epilayers having thicknesses of 3-4 lm was investigated using time domain thermoreflectance. Despite possessing carrier concentrations ranging across 3 decades (10 15 -10 18 cm -3 ), n-type layers exhibit a nearly constant thermal conductivity of 180 W/mK. The thermal conductivity of p-type epilayers, in contrast, reduces from 160 to 110 W/mK with increased doping. These trends-and their overall reduction relative to bulk-are explained leveraging established scattering models where it is shown that, while the decrease in p-type layers is partly due to the increased impurity levels evolving from its doping, size effects play a primary role in limiting the thermal conductivity of GaN layers tens of microns thick. Device layers, even of pristine quality, will therefore exhibit thermal conductivities less than the bulk value of 240 W/mK owing to their finite thickness. Published by AIP Publishing.

The annealing of nickel-coated porous carbon structures results in a new three dimensional nanostructured graphene encapsulated nickel core-shell electrode. A highly interdependent and dynamic process is observed that results in the complete reversal of the spatial orientations of the two component system after the annealing process. We examine the mechanism of carbon diffusion and observe unexpected morphological changes of the nickel in response to carbon crystallization. The new nickel-graphene core-shell electrode demonstrates excellent electrochemical properties with promising applications in micro-batteries and biosensors.

It is of paramount importance to improve the control over large area growth of high quality molybdenum disulfide (MoS2) and other types of 2D dichalcogenides. Such atomically thin materials have great potential for use in electronics, and are thought to make possible the first real applications of spintronics. Here in, a facile and reproducible method of producing wafer scale atomically thin MoS2 layers has been developed using the incorporation of a chelating agent in a common organic solvent, dimethyl sulfoxide (DMSO). Previously, solution processing of a MoS2 precursor, ammonium tetrathiomolybdate ((NH4)2MoS4), and subsequent thermolysis was used to produce large area MoS2 layers. Our work here shows that the use of ethylenediaminetetraacetic acid (EDTA) in DMSO exerts superior control over wafer coverage and film thickness, and the results demonstrate that the chelating action and dispersing effect of EDTA is critical in growing uniform films. Raman spectroscopy, photoluminescence (PL), x-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), atomic force microscopy (AFM) and high-resolution scanning transmission electron microscopy (HR-STEM) indicate the formation of homogenous few layer MoS2 films at the wafer scale, resulting from the novel chelant-in-solution method.

Currently, pathologists rely on labor-intensive microscopic examination of tumor cells using century-old staining methods that can give false readings. Emerging BioMicroNano-technologies have the potential to provide accurate, realtime, high-throughput screening of tumor cells without the need for time-consuming sample preparation. These rapid, nano-optical techniques may play an important role in advancing early detection, diagnosis, and treatment of disease. In this report, we show that laser scanning confocal microscopy can be used to identify a previously unknown property of certain cancer cells that distinguishes them, with single-cell resolution, from closely related normal cells. This property is the correlation of light scattering and the spatial organization of mitochondria. In normal liver cells, mitochondria are highly organized within the cytoplasm and highly scattering, yielding a highly correlated signal. In cancer cells, mitochondria are more chaotically organized and poorly scattering. These differences correlate with important bioenergetic disturbances that are hallmarks of many types of cancer. In addition, we review recent work that exploits the new technology of nanolaser spectroscopy using the biocavity laser to characterize the unique spectral signatures of normal and transformed cells. These optical methods represent powerful new tools that hold promise for detecting cancer at an early stage and may help to limit delays in diagnosis and treatment.

Currently, pathologists rely on labor-intensive microscopic examination of tumor cells using staining techniques originally devised in the 1880s that depend heavily on specimen preparation and that can give false readings. Emerging BioMicroNanotechnologies (Gourley, 2005) have the potential to provide accurate, realtime, high throughput screening of tumor cells without invasive chemical reagents. These techniques are critical to advancing early detection, diagnosis, and treatment of disease. Using a new technique to rapidly assess the properties of cells flown through a nanolaser semiconductor device, we discovered a method to rapidly assess the respiratory health of a single mammalian cell. The key discovery was the elucidation of biophotonic differences in normal and transformed (cancer) mouse liver cells by using intracellular mitochondria as biomarkers for disease. This technique holds promise for detecting cancer at a very early stage and could nearly eliminate delays in diagnosis and treatment.

Self-heating induced failure of graphene devices synthesized from both chemical vapor deposition (CVD) and epitaxial means is compared using a combination of infrared thermography and Raman imaging. Despite a larger thermal resistance, CVD devices dissipate >3x the amount of power before failure than their epitaxial counterparts. The discrepancy arises due to morphological irregularities implicit to the graphene synthesis method that induce localized heating. Morphology, rather than thermal resistance, therefore dictates power handling limits in graphene devices.