In this work, spongy graphene (SG), a shape-mouldable and nanoporous kinds of sorbent also increases, and the material with a high specific surface area used as a versatile and recyclable environmental and ecological risk of these sorbent material, is proposed and studied. SG shows highly effi cient absorp-polymers in application remains unclear.As an alternative to polymer, expanded tion of not only petroleum products and fats, but also toxic solvents such graphite (EG) has also been used to as toluene and chloroform (up to 86 times of its own weight), requiring no remove oil. Applying EG as an oil sorbent further pretreatment, which is tens of times higher than that of conventional was first done by Toyoda and Inagaki. [12,13] absorbers. Moreover, SG can be regenerated ( >10 times) by heat treatment, EG is a good absorber for crude oil and yielding the full release of adsorbates (>99%). The present work suggests SG

Humidity sensors have been extensively used in various fields, and numerous problems are encountered when using humidity sensors, including low sensitivity, long response and recovery times, and narrow humidity detection ranges. Using graphene oxide (G-O) films as humidity sensing materials, we fabricate here a microscale capacitive humidity sensor. Compared with conventional capacitive humidity sensors, the G-O based humidity sensor has a sensitivity of up to 37800% which is more than 10 times higher than that of the best one among conventional sensors at 15%–95% relative humidity. Moreover, our humidity sensor shows a fast response time (less than 1/4 of that of the conventional one) and recovery time (less than 1/2 of that of the conventional one). Therefore, G-O appears to be an ideal material for constructing humidity sensors with ultrahigh sensitivity for widespread applications.

Since the desire for real-time human health monitoring as well as seamless human-machine interaction is increasing rapidly, plenty of research efforts have been made to investigate wearable sensors and implantable devices in recent years. As a novel 2D material, graphene has aroused a boom in the field of sensor research around the world due to its advantages in mechanical, thermal, and electrical properties. Numerous graphene-based sensors used for human health monitoring have been reported, including wearable sensors, as well as implantable devices, which can realize the real-time measurement of body temperature, heart rate, pulse oxygenation, respiration rate, blood pressure, blood glucose, electrocardiogram signal, electromyogram signal, and electroencephalograph signal, etc. Herein, as a review of the latest graphene-based sensors for health monitoring, their novel structures, sensing mechanisms, technological innovations, components for sensor systems and potential challenges will be discussed and outlined.

Graphene-based three-dimensional porous macrostructures are believed of great importance in various applications, e.g. supercapacitors, photovoltaic cells, sensors and high-efficiency sorbents. However, to precisely control the microstructures and properties of this material to meet different application requirements in industrial practice remains challenging. We herein propose a facile and highly effective strategy for large-range tailoring the porous architecture and its properties by a modified freeze casting process. The pore sizes and wall thicknesses of the porous graphene can be gradually tuned by 80 times (from 10 to 800 μm) and 4000 times (from 20 nm to 80 μm), respectively. The property experiences the changing from hydrophilic to hydrophobic, with the Young's Modulus varying by 15 times. The fundamental principle of the porous microstructure evolution is discussed in detail. Our results demonstrate a very convenient and general protocol to finely tailor the structure and further benefit the various applications of porous graphene.

No abstract