There has been considerable interest in recent years in using metal, semiconductor, and magnetic nanoparticles in biological applications. [1][2][3][4][5][6][7] A wide range of ligation and encapsulation methods have been developed to render the nanoparticles soluble in aqueous solution, to prevent aggregation, and to provide means by which functional molecules can be attached. Among these methods, encapsulation of nanoparticles by a polymer, [8,9] phospholipid, [10] or inorganic [11,12] shell is of particular interest to us, since these stable shells prevent dissociation of surface ligands and provide anchor points where biomolecules are unlikely to be lost once attached. This is a significant advantage over direct conjugation through surface ligands, since even strong thiol ligands can dissociate from or undergo exchange on gold surfaces, [13] let alone weaker ligands on the surfaces of quantum dots or magnetic nanoparticles. Stable attachment of biomolecules would be particularly important where only a few biomolecules are selectively attached to a nanoparticle, or when multiple types of singly functionalized nanoparticles are mixed.Stable functionalization of quantum dots remains a challenge. While biomolecules have been attached to quantum dots and used for biological studies, [4,5] a nondissociable ligand shell would be required for attachment of biomolecules selectively and with controlled valency. Recently, Taton et al. reported encapsulation of gold nanoparticles (AuNPs) [14,15] and magnetic nanoparticles (MagNPs) [16,17] by amphiphilic diblock copolymers. The resulting nanoparticles have a stable, well-defined core/shell structure impermeable to ionic species in aqueous solution. Such a polymer shell would be ideal for functionalization of quantum dots if a similar encapsulation methodology could be adopted. However, it was found that in this system small (d < 10 nm) AuNPs and MagNPs act as solutes in polymer micelles and are therefore prone to multiple inclusion on encapsulation. [14] In contrast, large AuNPs act as surface templates on which polymer molecules assemble into micellar shells that each encapsulate a single AuNP. Since most nanoparticles used for biological studies, particularly quantum dots, have diameters in the range of 2-9 nm, it is necessary that we develop new methods that can encapsulate single nanoparticles of sizes similar to quantum dots.Herein we report the encapsulation of single small AuNPs, in preparation for future work on quantum dots, since AuNPs are easier to handle and characterize. Diblock copolymers such as PS 108 PGA 108 , PS 132 PAA 72 , and PS 159 PAA 62 [PS: polystyrene, PGA: poly(glutamic acid), PAA: poly(acrylic acid)] were used to encapsulate AuNPs in "hairy" micelles (Figure 1 B); the resulting core/shell nanoparticles are stable in solution without chemical crosslinking. The long hydrophilic blocks of the polymers were initially chosen to help stabilize attached biomolecules, but were later found to allow encapsulation of single small AuNPs. The use of such po...
Oil/water separation has been of great interest worldwide because of the increasingly serious environmental pollution caused by the abundant discharge of industrial wastewater, oil spill accidents, and odors. Here, we describe simple and economical superhydrophobic hybrid membranes for effective oil/water separation. Eco-friendly, antifouling membranes were fabricated for oil/water separation, waste particle filtration, the blocking of thiol-based odor materials, etc., by using a cellulose membrane (CM) filter. The CM was modified from its original superhydrophilic nature into a superhydrophobic surface via a reversible addition-fragmentation chain transfer technique. The block copolymer poly{[3-(trimethoxysilyl)propyl acrylate]-block-myrcene} was synthesized using a "grafting-from" approach on the CM. The surface contact angle that we obtained was >160°, and absorption tests of several organic contaminants (oils and solvents) exhibited superior levels of extractive activity and excellent reusability. These properties rendered this membrane a promising surface for oil/water separation. Interestingly, myrcene blocks thiol (through "-ene-" chemistry) contaminants, thereby bestowing a pleasant odor to polluted water by acting as an antifouling material. We exploited the structural properties of cellulose networks and simple chemical manipulations to fabricate an original material that proved to be effective in separating water from organic and nano/microparticulate contaminants. These characteristics allowed our material to effectively separate water from oily/particulate phases as well as embed antifouling materials for water purification, thus making it an appropriate absorber for chemical processes and environmental protection.
Biomaterials generally suffer from rapid nonspecific protein adsorption, which initiates many deleterious host responses, and complex chemistries that are employed to facilitate cellular interactions. A chemical approach that, based upon current literature, combines a nonfouling architecture with a biomemtic cell-adhesive end-group, is presented. Namely, surface-initiated polymerization of zwitterionic [poly (carboxybetaine methacrylamide)] brushes, with controlled charge densities and phosphonate head groups. Nitroxide mediated free radical polymerization (NMFRP) was employed for various reasons: reduces presence of potentially cytotoxic organometallic catalysts common in atom transfer radical polymerization (ATRP); and it allows a phosphonate end-group instead of the common brominated end-group. Thermally oxidized silicon wafers were covalently functionalized with diethyl-(1-(N-(1-(3-(trimethoxysilyl)propylcarbamoyl)ethoxy)-Ntert-butylamino)ethyl)phosphonate. NMFRP was used to graft zwitterionic carboxybetaine methacrylamide monomers of varying inter-charge separation. The resulting thin films were characterized using Attenuated Total Reflectance-Fourier Transform Infrared (ATR-FTIR) and X-ray photoelectron (XPS) spectroscopy, ellipsometry, water contact angle analysis, and thermo gravimetric analysis (TGA). The effect of spacer group on the surface charge density was determined using zeta potential techniques. It is thought that this stratagem will facilitate the ability to tailor systematically both the interior and terminal polymer properties, providing a platform for further understanding how these conditions affect protein adsorption as well as cell-surface interactions. V
In this article, the development of a novel technique to fabricate spherical polymeric microcapsules by utilizing microfluidic technology is presented. Atom transfer radical polymerization (ATRP) was employed to synthesize well-defined amphiphilic block copolymers. An organic polymer solution was constrained to adopt the spherical droplets in a continuous water phase at a T-junction microchannel, and the generation of the droplets was studied quantitatively. The flow conditions of two immiscible solutions were adjusted for the successful generation of the polymer droplets. The morphology of the microcapsules was examined. The efficiency of these polymer microcapsules as containers for the storage and controlled release of loaded molecules was evaluated by encapsulating the microcapsules with Congo-red dye and investigating the release performance using temperature controlled UV-VIS spectroscopy.
The self-assembling nature and phase-transition behavior of a novel class of triarm, star-shaped polymer-peptide block copolymers synthesized by the combination of atom transfer radical polymerization and living ring-opening polymerization of a-amino acid-N-carboxyanhydride are demonstrated. The two-step synthesis strategy adopted here allows incorporating polypeptides into the usual synthetic polymers via an amido-amidate nickelacycle intermediate, which is used as the macroinitiator for the growth of poly(c-benzyl-L-glutamate). The characterization data are reported from analyses using gel permeation chromatography and infrared, 1 H NMR, and 13 C NMR spectroscopy. This synthetic scheme grants a facile way to prepare a wide range of polymer-peptide architectures with perfect microstructure control, preventing the formation of homopolypeptide contaminants. Studies regarding the supramolecular organization and phase-transition behavior of this class of polymer-block-polypeptide copolymers have been accomplished with X-ray diffraction, infrared spectroscopy, and thermal analyses. The conformational change of the peptide segment in the block copolymer has been investigated with variable-temperature infrared spectroscopy.
Nonfouling polymer architectures are considered important to the successful implementation of many biomaterials. It is thought that how these polymers induce conformational changes in proteins upon adsorption may dictate the fate of the device being utilized. Herein, oxidized silicon nanoparticles (SiNP) were modified with various forms of poly(carboxybetaine methacrylamide) (PCBMA) for the express purpose of understanding how polymer chemistry affects film hydration, adsorbed protein conformation, and clot formation kinetics. To this end, carboxybetaine monomers differing in intercharge separating spacer groups were synthesized, and nitroxide-mediated free radical polymerization (NMP) was conducted using alkoxyamine initiators with hydrophobic (TEMPO) and hydrophilic (β-phosphonate) terminal groups. The physical properties (surface composition, thickness, grafting density, etc.) of the resulting polymer-SiNP conjugates were quantified using several techniques, including Fourier transform infrared (FTIR) spectroscopy, dynamic light scattering (DLS), and thermogravimetric analysis (TGA). The effect of spacer group on the surface charge density was determined using zeta potential measurements. Three proteins, viz., lysozyme, bovine α-lactalbumin, and human serum albumin, were used to evaluate the effect film properties (charge, hydration, end-group) have on adsorbed protein conformation, as determined by circular dichroism (CD), fluorescence spectroscopy, and fluorescence quenching techniques. Hemocompatibility of these surfaces was observed by measuring clot formation kinetics using the plasma recalcification time assay. It was found that chain chemistry, as opposed to end-group chemistry, was a major determiner for water structure, adsorbed protein conformation, and clotting kinetics. It is thought that the systematic evaluation of how both chain (internal) and end-group (external) polymer properties affect film hydration, protein conformation, and clot formation will provide valuable insight that can be applied to all engineered surfaces for biomedical applications.
A series of poly(styrene‐block‐tert‐butyl acrylate) heteroatom star block copolymers having various block lengths were prepared by atom transfer radical polymerization (ATRP), using an “as synthesized” cynurate modified trifunctional initiator. The structure of the star polymers was confirmed by the characterization of the individual arms resulting from hydrolysis. Amphiphilic poly(styrene‐block‐acrylic acid) star copolymers were further synthesized by hydrolyzing PtBA blocks using anhydrous trifluoroacetic acid. The characterization data are reported from analyses using gel permeation chromatography, infrared, 1H and 13C NMR spectroscopies. The stable micelle solution was prepared by dialyzing the solution of these polymers in N,N‐dimethylformamide against deionized water. The temperature‐induced associating behavior of these amphiphilic star polymers were studied using dynamic laser light scattering spectroscopy. The hydrodynamic diameter of both micelles and unassociated chains were obtained in the same solution using light scattering cumulant's calculation method. The homogeneity and the size distribution of the micelle population in the solution were determined using centrifuge/sedimentation particle size distribution analyzer. Field emission scanning electron microscope was used to visualize the size of the micelles formed and the micellar aggregates. The influence of the temperature on the viscosity of the micelle solution was studied using an Ubbelohde viscometer. Thermodynamics of micellization of these block copolymers were also investigated. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6367–6378, 2005
A photoresponsive microstructured composite is fabricated through the impregnation of cellulosic filter paper (FP) with a spiropyran-modified acrylic polymer. The polymer enwraps uniformly each individual cellulose fiber, increases the thermal stability of cellulose, and ensures the preservation of the composite functionalities even upon removal of the surface layers through mechanical scratching. The photochromic spiropyran moieties of the polymer, even while embedded in the cellulosic sheet, can reversibly interconvert between the colorless spiropyran and the pink merocyanine isomeric states upon irradiation with UV and visible light, respectively. Moreover, the photochromic polymer presents a faster photochromic response and a higher resistance to photodegradation, with an outstanding reusability for more than 100 switching cycles when it is incorporated in the cellulose network. Most importantly, the acidochromism of the modified FP, attributed to the spiropyran molecules after UV activation, allows the real-time optical and visual detection of acidity changes and spoilage in food products, such as wine and milk. Spoilage due to bacterial degradation and oxidation processes generates acidic vapors that induce the protonation of the merocyanine. This results in a visually detectable chromic transition from pink to white of the treated cellulose fibers, corresponding to a blue shift in the absorption spectrum. The developed photoresponsive cellulose composite can serve as cost-effective robust optical component in integrated functional platforms and consumer-friendly indicators for smart food packaging, as well as portable on demand acidoresponsive interfaces for gas monitoring in industrial and environmental applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.