The grafting of powder and granular polypropylene (PP) with maleic anhydride (MA) was investigated in a reactive extrusion process with dicumyl peroxide (DCP) as an initiator. The effects of the MA and DCP contents in the feed on grafting were investigated. Under the experimental conditions applied in this study, the grafted monomer unit content was varied from 0.023 to 0.5%. The MA grafting efficiency of powder PP was higher than that obtained for the granular form of PP. In general, the grafting degree first increased with the MA or DCP content in the feed, then reached a maximum value, and finally decreased because of several possible alternative reactions during the grafting. The grafting of powder PP was more successful because of better initial mixing and less diffusional resistance during the grafting. An increase in the MA content in the feed caused significant reductions in the melt-flow index of the graft copolymers. The results obtained with Fourier transform infrared, differential scanning calorimetry, and X-ray powder diffraction analyses indicated that the structure, macrotacticity, crystallinity, crystallization, and thermal behavior of PP changed with grafting and depended on the grafting degree.

The aim of this study was to investigate the effectiveness of a novel hydroxyapatite containing gelatin scaffold--with and without local vascular endothelial growth factor (VEGF) administration--as the synthetic graft material in treatment of critical-sized bone defects. An experimental nonunion model was established by creating critical-sized (10 mm. in length) bone defects in the proximal tibiae of 30 skeletally mature New Zealand white rabbits. Following tibial intramedullary fixation, the rabbits were grouped into three: The defects were left empty in the first (control) group, the defects were grafted with synthetic scaffolds in the second group, and synthetic scaffolds loaded with VEGF were administered at bone defects in the third group. Five rabbits in each group were killed on 6th and 12th weeks, and new bone growth was assessed radiologically, histologically and with dual-energy X-ray absorptiometry (DEXA). At 6 weeks, VEGF-administered group had significantly better scores than the other two groups. The second group also had significantly better scores than the control group. At 12 weeks, while no significant difference was noted between the second and third groups, these two groups both had significantly better scores in all criteria compared with the control group. There were no signs of complete fracture healing in the control group. The administration of hydroxyapatite containing gelatin scaffold yielded favorable results in grafting the critical-sized bone defects in this experimental model. The local administration of VEGF on the graft had a positive effect in the early phase of fracture healing.

Biomaterials are widely used in diverse applications as substances, materials or important elements of biomedical devices. Biodegradable polymers, both natural and synthetic, have been utilized in applications in which they act as temporary substitutes. Poly(alpha-hydroxy acids), especially lactic acids and glycolic acid and their copolymers with epsilon-caprolactone, are the most widely known and used among all biodegradable polymers. They degrade in vivo into safe end products mainly by hydrolysis in a few weeks to several months, depending on several factors, including molecular structure/morphology, average molecular weight, size and shape. They are processed into tailor-made materials for diverse applications, although mainly for soft and hard tissue repair. Electrospinning is a method of producing nanofibers and nonwoven matrices from their solutions and melts. Several factors affect fiber diameter and resulting nonwoven structures/morphologies. Recently, electrospun matrices made of lactic acids, glycolic acid and epsilon-caprolactone homo- and co-polymers have been attracting increasing attention for fabrication of novel materials for medical use. This review briefly describes poly(alpha-hydroxy acids) and the elecrospinning process, and gives some selected recent applications of electrospun matrices made from these polymers.

In order to increase stabilities and controlled/sustained released of T4 phages were encapsulated within alginate beads which were then coated with chitosan, polyethylene imine (PEI). Quite high loading capacities (over 90%) were achieved in these pH-sensitive microbeads. Coating with those polycations increased significantly stability both in "simulated gastric fluid" and bile salts especially in the case of PEI coating. The tests conducted in "simulated intestinal fluid" demonstrated that phages were released from the beads which were active at basic pH in which the release rates were smaller in case of chitosan. PEI concluded to be a better coating then chitosan.

Biodegradable PLA-PEG-PLA block copolymers were synthesized with desired backbone structures and molecular weights using PEG20000. Rectangular scaffolds were prepared by freeze drying with or without using NaCl particles. Bone morphogenetic protein (BMP)-2 was loaded to the matrix after the scaffold formation for sustained release while vascular endothelial growth factor (VEGF) was loaded within the pores with gelatin solution. VEGF release was quite fast and almost 60% of it was released in 2 d. However, sequential - sustained released was observed for BMP-2 in the following few months. Corporation of VEGF/BMP-2 couple into the scaffolds increased the cell adhesion and proliferation. Neither significant cytotoxicity nor apoptosis/necrosis were observed.

No abstract

No abstract

No abstract