Free-standing conductive ultra-thin films based on poly(3,4-ethylenedioxythiophene)/poly (styrenesulfonate) (PEDOT/PSS) are realized. A fabrication process based on a modified Supporting Layer technique is proposed that provides for the easy production of conductive nanofilms having a very large surface area with typical thickness of tens of nanometres. The proposed free-standing nanofilms can be manipulated, folded and unfolded in water many times without suffering from cracks, disaggregation or from loss of conductive properties. After collecting them onto rigid or soft substrates, they retain their functionality. Structural and functional properties of the nanofilms are described by means of their thickness, topography, conductivity and Young's modulus. Strong dependences of these properties on residual water, post-deposition treatments and environmental moisture are clearly evidenced. Possible applications are foreseen in the field of sensing and actuation, as well as in the biomedical field, e.g. as smart substrates for cell culturing and stimulation.
Surfaces with controlled micro and nanoscale topographical cues are useful as smart scaffolds and biointerfaces for cell culture. Recently, use of thin-film and surface wrinkling is emerging as a rapid unconventional method for preparing topographically patterned surfaces, especially suited for the production of smart patterns over large area surfaces. On the other hand, there is an increasing interest in employing conducting polymers as soft, biocompatible, conductive biointerfaces or as parts of bioelectronic devices. A novel convenient and versatile method is presented for producing anisotropic topographical cues at the micro- and nanoscale on conducting polymer surfaces. Micro and nanowrinkles were formed during the heat-shrinking process of a thermo-retractable polystyrene substrate. Surface wrinkling was due to the mismatch between the mechanical properties of a conducting polymer ultrathin film and the substrate. Various geometries of wrinkled structures were prepared, demonstrating the tunability of topography depending on the thickness of the conductive film. A method for patterning the conductive properties of the wrinkled substrates was also presented. Such surfaces acted as smart scaffolds for the functional alignment of cells, envisioning their electrical stimulation. Cell adhesion and proliferation were evaluated, comparing different topographies, and a preferential anisotropic alignment of C2C12 murine skeletal muscle cells along wrinkles was demonstrated. The observed trends were also confirmed concerning the formation of aligned myotubes in C2C12 differentiation stage. Furthermore, improved results in terms of aligned and mature myotube formation were obtained by co-culturing C2C12 cells with a fibroblasts feeder layer. The combination of living cells and tunable conductive nanowrinkles will represent a unique tool for the development of innovative biomedical devices.
In this study, a new simple, fast, and inexpensive technique for the preparation of free-standing nanocomposite ultrathin films based on the conductive polymer poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) and embedding iron oxide nanoparticles (NPs) is presented. These nanofilms were fabricated by a single step of spin-coated assisted deposition in conjunction with a release technique ("supporting layer technique") to detach them from the substrate. Free-standing nanofilms can be easily transferred onto several substrates due to their high conformability, preserving their functionalities. The effect of the addition of iron oxide nanoparticles on the structural and functional properties of the PEDOT:PSS nanofilms is investigated through topography, thickness, magnetic, magneto-optical activity, and conductivity characterizations. PEDOT:PSS and PEDOT:PSS/iron oxide NP nanofilms were tested as resistive humidity sensors. Their sensitivity to humidity was found to increase with increasing nanoparticle concentration. On the basis of these results, it is expected that these composites may furnish inexpensive and reliable means for relative humidity detection.
Freely suspended nanocomposite thin films based on soft polymers and functional nanostructures have been widely investigated for their potential application as active elements in microdevices. However, most studies are focused on the preparation of nanofilms composed of polyelectrolytes and charged colloidal particles. Here, a new technique for the preparation of poly(l-lactic acid) free-standing nanofilms embeddidng superparamagnetic iron oxide nanoparticles is presented. The fabrication process, based on a spin-coating deposition approach, is described, and the influence of each production parameter on the morphology and magnetic properties of the final structure is investigated. Superparamagnetic free-standing nanofilms were obtained, as evidenced by a magnetization hysteresis measurement performed with a superconducting quantum interference device (SQUID). Nanofilm surface morphology and thickness were evaluated by atomic force microscopy (AFM), and the nanoparticle dispersion inside the composites was investigated by transmission electron microscopy (TEM). These nanofilms, composed of a biodegradable polyester and remotely controllable by external magnetic fields, are promising candidates for many potential applications in the biomedical field.
We present the design and development of a plant-inspired robot, named Plantoid, with sensorized robotic roots. Natural roots have a multi-sensing capability and show a soft bending behaviour to follow or escape from various environmental parameters (i.e., tropisms). Analogously, we implement soft bending capabilities in our robotic roots by designing and integrating soft spring-based actuation (SSBA) systems using helical springs to transmit the motor power in a compliant manner. Each robotic tip integrates four different sensors, including customised flexible touch and innovative humidity sensors together with commercial gravity and temperature sensors. We show how the embedded sensing capabilities together with a root-inspired control algorithm lead to the implementation of tropic behaviours. Future applications for such plant-inspired technologies include soil monitoring and exploration, useful for agriculture and environmental fields.
An increasing interest in bio-hybrid systems and cell-material interactions is evident in the last years. This leads towards the development of new nano-structured devices and the assessment of their biocompatibility. In the present study, the development of free-standing single layer poly(lactic acid) (PLA) ultra-thin films is described, together with the analysis of topography and roughness properties. The biocompatibility of the PLA films has been tested in vitro, by seeding C2C12 skeletal muscle cells, and thus assessing cells shape, density and viability after 24, 48 and 72 h. The results show that free-standing flexible PLA nanofilms represent a good matrix for C2C12 cells adhesion, spreading and proliferation. Early differentiation into myotubes is also allowed. The biocompatibility of the novel ultra-thin films as substrates for cell growth promotes their application in the fields of regenerative medicine, muscle tissue engineering, drug delivery, and-in general-in the field of bio-hybrid devices.
A process is presented for the fabrication of patterned ultrathin free-standing conductive nanofilms based on an all-polymer bilayer structure composed of poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonate) and poly(lactic acid) (PEDOT:PSS/PLA). Based on the strategy recently introduced by our group for producing large area free-standing nanofilms of conductive polymers with ultrahigh conformability, here an inkjet subtractive patterning technique was used, with localized overoxidation of PEDOT:PSS that caused the local irreversible loss of electrical conductivity. Different pattern geometries (e.g., interdigitated electrodes with various spacing, etc.) were tested for validating the proposed process. The fabrication of individually addressable microelectrodes and simple circuits on nanofilm having thickness ∼250 nm has been demonstrated. Using this strategy, mechanically robust, conformable ultrathin polymer films could be produced that can be released in water as free-standing nanofilms and/or collected on surfaces with arbitrary shapes, topography and compliance, including human skin. The patterned bilayer nanofilms were characterized as regards their morphology, thickness, topography, conductivity, and electrochemical behavior. In addition, the electrochemical switching of surface properties has been evaluated by means of contact angle measurements. These novel conductive materials can find use as ultrathin, conformable electronic devices and in many bioelectrical applications. Moreover, by exploiting the electrochemical properties of conducting polymers, they can act as responsive smart biointerfaces and in the field of conformable bioelectronics, for example, as electrodes on tissues or smart conductive substrates for cell culturing and stimulation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.