No abstract

No abstract

Free-standing conductive ultra-thin films based on poly(3,4-ethylenedioxythiophene)/poly (styrenesulfonate) (PEDOT/PSS) are realized. A fabrication process based on a modified Supporting Layer technique is proposed that provides for the easy production of conductive nanofilms having a very large surface area with typical thickness of tens of nanometres. The proposed free-standing nanofilms can be manipulated, folded and unfolded in water many times without suffering from cracks, disaggregation or from loss of conductive properties. After collecting them onto rigid or soft substrates, they retain their functionality. Structural and functional properties of the nanofilms are described by means of their thickness, topography, conductivity and Young's modulus. Strong dependences of these properties on residual water, post-deposition treatments and environmental moisture are clearly evidenced. Possible applications are foreseen in the field of sensing and actuation, as well as in the biomedical field, e.g. as smart substrates for cell culturing and stimulation.

Electrically interfacing the skin for monitoring personal health condition is the basis of skin‐contact electrophysiology. In the clinical practice the use of stiff and bulky pregelled or dry electrodes, in contrast to the soft body tissues, imposes severe restrictions to user comfort and mobility while limiting clinical applications. Here, in this work dry, unperceivable temporary tattoo electrodes are presented. Customized single or multielectrode arrays are readily fabricated by inkjet printing of conducting polymer onto commercial decal transfer paper, which allows for easy transfer on the user's skin. Conformal adhesion to the skin is provided thanks to their ultralow thickness (<1 µm). Tattoo electrode–skin contact impedance is characterized on short‐ (1 h) and long‐term (48 h) and compared with standard pregelled and dry electrodes. The viability in electrophysiology is validated by surface electromyography and electrocardiography recordings on various locations on limbs and face. A novel concept of tattoo as perforable skin‐contact electrode, through which hairs can grow, is demonstrated, thus permitting to envision very long‐term recordings on areas with high hair density. The proposed materials and patterning strategy make this technology amenable for large‐scale production of low‐cost sensing devices.

Biomimetic functional surfaces are attracting increasing attention for their relevant technological applications. Despite these efforts, inherent limitations of microfabrication techniques prevent the replication of complex hierarchical microstructures. Using a 3D laser lithography technique, we fabricated a 3D patterned surface bioinspired to Salvinia molesta leaves. The artificial hairs, with crownlike heads, were reproduced by scaling down (ca. 100 times smaller) the dimensions of natural features, so that microscale hairs with submicrometric resolution were attained. The micropatterned surface, in analogy with the natural model, shows interesting properties in terms of hydrophobicity and air retention when submerged by water, even if realized with a hydrophilic material. Furthermore, we successfully demonstrated the capability to promote localized condensation of water droplets from moisture in the atmosphere.

The use of natural or bioinspired materials to develop edible electronic devices is a potentially disruptive technology that can boost point-of-care testing. The technology exploits devices that can be safely ingested, along with pills or even food, and operated from within the gastrointestinal tract. Ingestible electronics can potentially target a significant number of biomedical applications, both as therapeutic and diagnostic tool, and this technology may also impact the food industry, by providing ingestible or food-compatible electronic tags that can "smart" track goods and monitor their quality along the distribution chain. Temporary tattoo-paper is hereby proposed as a simple and versatile platform for the integration of electronics onto food and pharmaceutical capsules. In particular, the fabrication of all-printed organic field-effect transistors on untreated commercial tattoo-paper, and their subsequent transfer and operation on edible substrates with a complex nonplanar geometry is demonstrated.

Surfaces with controlled micro and nanoscale topographical cues are useful as smart scaffolds and biointerfaces for cell culture. Recently, use of thin-film and surface wrinkling is emerging as a rapid unconventional method for preparing topographically patterned surfaces, especially suited for the production of smart patterns over large area surfaces. On the other hand, there is an increasing interest in employing conducting polymers as soft, biocompatible, conductive biointerfaces or as parts of bioelectronic devices. A novel convenient and versatile method is presented for producing anisotropic topographical cues at the micro- and nanoscale on conducting polymer surfaces. Micro and nanowrinkles were formed during the heat-shrinking process of a thermo-retractable polystyrene substrate. Surface wrinkling was due to the mismatch between the mechanical properties of a conducting polymer ultrathin film and the substrate. Various geometries of wrinkled structures were prepared, demonstrating the tunability of topography depending on the thickness of the conductive film. A method for patterning the conductive properties of the wrinkled substrates was also presented. Such surfaces acted as smart scaffolds for the functional alignment of cells, envisioning their electrical stimulation. Cell adhesion and proliferation were evaluated, comparing different topographies, and a preferential anisotropic alignment of C2C12 murine skeletal muscle cells along wrinkles was demonstrated. The observed trends were also confirmed concerning the formation of aligned myotubes in C2C12 differentiation stage. Furthermore, improved results in terms of aligned and mature myotube formation were obtained by co-culturing C2C12 cells with a fibroblasts feeder layer. The combination of living cells and tunable conductive nanowrinkles will represent a unique tool for the development of innovative biomedical devices.

Conductive tattoo nanosheets are fabricated on top of decal transfer paper and transferred on target surfaces as temporary transfer tattoos. Circuits are patterned with ink-jet printing. Tattoo nanosheets are envisioned as unperceivable human-device interfaces because of conformal adhesion to complex surfaces including skin. They are tested as dry electrodes for surface electromyography (sEMG), which permits the control of a robotic hand.