We analyze the uncertainty of the coefficient of band-to-band absorption of crystalline silicon. For this purpose, we determine the absorption coefficient at room temperature (295 K) in the wavelength range from 250 to 1450 nm using four different measurement methods. The data presented in this work derive from spectroscopic ellipsometry, measurements of reflectance and transmittance, spectrally resolved luminescence measurements and spectral responsivity measurements. A systematic measurement uncertainty analysis based on the Guide to the expression of uncertainty in measurement (GUM) as well as an extensive characterization of the measurement setups are carried out for all methods. We determine relative uncertainties of the absorption coefficient of 0.4% at 250 nm, 11% at 600 nm, 1.4% at 1000 nm, 12% at 1200 nm and 180% at 1450 nm. The data are consolidated by intercomparison of results obtained at different institutions and using different measurement approaches.
In this study, we explore for the first time the capabilities of nanoporous anodic alumina gradient-index filters (NAA-GIFs) functionalized with titanium dioxide (TiO) photoactive layers to enhance photon-to-electron conversion rates and improve the efficiency of photocatalytic reactions by "slow photon" effect. A set of NAA-GIFs was fabricated by sinusoidal pulse anodization, in which a systematic modification of various anodization parameters (i.e., pore widening time, anodization period, and anodization time) enables the fine-tuning of the photonic stopband (PSB) of these nanoporous photonic crystals (PCs) across the spectral regions. The surface of NAA-GIFs was chemically modified with photoactive layers of TiO to create a composite photoactive material with precisely engineered optical properties. The photocatalytic performance of TiO-functionalized NAA-GIFs was assessed by studying the photodegradation of three model organic dyes (i.e., methyl orange, Rhodamine B, and methylene blue) with well-defined absorption bands across different spectral regions under simulated irradiation conditions. Our study demonstrates that when the edges of characteristic PSB of TiO-modified NAA-GIFs are completely or partially aligned with the absorption band of the organic dyes, the photodegradation rate is enhanced due to "slow photon" effect. A rational design of the photocatalyst material with respect to the organic dye is demonstrated to be optimal to speed up photocatalytic reactions by an efficient management of photons from high-irradiance spectral regions. This provides new opportunities to develop high-performing photocatalytic materials for efficient photocatalysis with broad applicability.
A comprehensive study on the engineering of titanium dioxide-functionalized nanoporous anodic alumina distributed Bragg reflectors (TiO 2-NAA-DBRs) for photocatalysis enhanced by the "slow photon" effect is presented. The photocatalytic performance of these composite photonic crystals (PCs) is assessed by monitoring photodegradation of a variety of organic molecules with absorbance bands across the spectral regions. This study demonstrates that photocatalytic performance of TiO 2-NAA-DBRs is enhanced by the "slow photon" effect when the edges of the PC's photonic stopband (PSB) fall within the absorbance band of the organic molecules. The photocatalytic performance is significantly enhanced when the PSB's red edge is in close proximity to the absorbance band of the organic molecules. Overall photocatalytic degradation is also dependent on the total pore length of the PC structure, charge of the organic molecules, percentage of vis-NIR irradiation and matrix complexity (i.e. interfering ions and molecules) when the PC's PSB is partially or entirely misaligned with respect to the absorbance band of the organic molecules. Finally, the real-life application of TiO 2-NAA-DBRs to degrade pollutants such as pesticides in environmental matrices is
Optical sensors are a class of devices that enable the identification and/or quantification of analyte molecules across multiple fields and disciplines such as environmental protection, medical diagnosis, security, food technology, biotechnology, and animal welfare. Nanoporous photonic crystal (PC) structures provide excellent platforms to develop such systems for a plethora of applications since these engineered materials enable precise and versatile control of light–matter interactions at the nanoscale. Nanoporous PCs provide both high sensitivity to monitor in real-time molecular binding events and a nanoporous matrix for selective immobilization of molecules of interest over increased surface areas. Nanoporous anodic alumina (NAA), a nanomaterial long envisaged as a PC, is an outstanding platform material to develop optical sensing systems in combination with multiple photonic technologies. Nanoporous anodic alumina photonic crystals (NAA-PCs) provide a versatile nanoporous structure that can be engineered in a multidimensional fashion to create unique PC sensing platforms such as Fabry–Pérot interferometers, distributed Bragg reflectors, gradient-index filters, optical microcavities, and others. The effective medium of NAA-PCs undergoes changes upon interactions with analyte molecules. These changes modify the NAA-PCs’ spectral fingerprints, which can be readily quantified to develop different sensing systems. This review introduces the fundamental development of NAA-PCs, compiling the most significant advances in the use of these optical materials for chemo- and biosensing applications, with a final prospective outlook about this exciting and dynamic field.
An extensive study on the structural engineering of titanium dioxide-functionalized nanoporous anodic alumina optical microcavities (TiO2-NAA-μQVs) for photocatalysis enhanced by light confinement is presented.
This study explores the potential of gold-coated titania-functionalized nanoporous anodic alumina distributed Bragg reflectors (Au-TiO2-NAA-DBRs) as platforms to enhance photocatalytic reactions by integrating “slow photons” and surface plasmon resonance (SPR).
The hemispherical barrier oxide layer (BOL) closing the bottom tips of hexagonally distributed arrays of cylindrical nanochannels in nanoporous anodic alumina (NAA) membranes is structurally engineered by anodizing aluminum substrates in three distinct acid electrolytes at their corresponding self-ordering anodizing potentials. These nanochannels display a characteristic ionic current rectification (ICR) signal between high and low ionic conduction states, which is determined by the thickness and chemical composition of the BOL and the pH of the ionic electrolyte solution. The rectification efficiency of the ionic current associated with the flow of ions across the anodic BOL increases with its thickness, under optimal pH conditions. The inner surface of the nanopores in NAA membranes was chemically modified with thiol-terminated functional molecules. The resultant NAA-based iontronic system provides a model platform to selectively detect gold metal ions (Au3+) by harnessing dynamic ICR signal shifts as the core sensing principle. The sensitivity of the system is proportional to the thickness of the barrier oxide layer, where NAA membranes produced in phosphoric acid at 195 V with a BOL thickness of 232 ± 6 nm achieve the highest sensitivity and low limit of detection in the sub-picomolar range. This study provides exciting opportunities to engineer NAA structures with tailorable ICR signals for specific applications across iontronic sensing and other nanofluidic disciplines.
A comprehensive study about the structural engineering of high quality nanoporous anodic alumina optical microcavities (NAA-μCVs) fabricated by rationally designed anodisation strategies to enhance the light-confining capabilities of these photonic crystal (PC) structures is presented. Two types of NAA-μCV architectures are produced: (i) GIF-NAA-μCVs composed of a cavity layer featuring straight nanopores that is sandwiched between two gradient-index filters (GIFs) with sinusoidally modulated porosity in depth, and (ii) DBR-NAA-μCVs formed by sandwiching a cavity layer with straight nanopores between two distributed Bragg reflectors (DBRs), in which the porosity is engineered in a stepwise fashion. The geometric features of GIF-NAA-μCVs and DBR-NAA-μCVs are engineered and optimised through a systematic modification of the anodisation parameters (i.e. cavity anodisation time, cavity anodisation current density, anodisation period and number of anodisation pulses, and pore widening time). This methodology enables fine-tuning of the optical properties of GIF-NAA-μCVs and DBR-NAA-μCVs, such as quality factor and position and width of resonance band, to generate NAA-μCVs with unprecedented quality factors (i.e. 170 ± 8 and 206 ± 10 for the first and second order resonance bands - threefold and fourfold quality enhancement as compared to previous studies). Our results demonstrate that an optimal design of the geometric features and the nanoporous architecture of NAA-μCVs can significantly enhance resonant recirculation of light within these PC structures, creating new opportunities to develop ultrasensitive optical platforms, highly selective optical filters, and other photonic devices.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.