No abstract

The complex‐oxide materials are multifunctional materials, which have wide applications to the semiconductor and microelectronic fields. The ZnGa2O4 having a wide bandgap of 5.1 eV is one of the promising materials for deep‐ultraviolet photodetector (PD) applications. The ZnGa2O4 films are deposited by using conventional radio‐frequency magnetron sputtering which is extensively employed in the industry. However, the as‐deposited ZnGa2O4 films show the disordered nanocrystalline structure, resulting in the relatively poor performance. Since the Zn atoms can diffuse out of the film structure during the annealing, the ZnGa2O4 material is difficult to get the single‐crystalline structure by using the sputtering method. Here, the solid‐phase epitaxy method is used for crystallizing the ZnGa2O4 structure via rapid thermal annealing process. The disordered crystal grains as incubated seeds are obtained in the as‐deposited ZnGa2O4 film at the substrate temperature of 400 °C. Further annealing under the temperature of 700 °C in 1 min, the ZnGa2O4 film structure approaches the quasi‐single‐crystalline ZnGa2O4 structure, which is evidenced by checking the transmission electron microscopy. The responsivity of annealed ZnGa2O4 PDs can reach 2.53 A W−1 (at 240 nm and 5 V), which shows a relative enhancement of 256% compared with the as‐deposited ZnGa2O4 PDs.

No abstract

No abstract

A 0.28-inch InGaN-based blue micro-LED display with 256 pixel-per-inch resolution and a pitch of 100 μm was successfully fabricated in this study. A thick Ti/Al/Ti/Au interconnection metal was deposited on the n-type gallium nitride (n-GaN) region to reduce the interconnection resistance. The micro-LED array with interconnection metal exhibits better electrical property consistency as compared with that of the traditional one. The output power, forward voltage, and external quantum efficiency of micro-LED, which measured under 1-mA current injection with the full lighting mode, are 0.8 mW, 3.0 V, and 10%, respectively. This technique has the potential to integrate InGaN-based LEDs with quantum dots for full-color applications.