No abstract

As one of the most influential greenhouse gases, carbon dioxide (CO2) has a profound impact on the global climate. The spaceborne integrated path differential absorption (IPDA) lidar will be a great sensor to obtain the columnar concentration of CO2 with high precision. This paper analyzes the performance of a spaceborne IPDA lidar, which is part of the Aerosol and Carbon Detection Lidar (ACDL) developed in China. The line-by-bine radiative transfer model was used to calculate the absorption spectra of CO2 and H2O. The laser transmission process was simulated and analyzed. The sources of random and systematic errors of IPDA lidar were quantitatively analyzed. The total systematic errors are 0.589 ppm. Monthly mean global distribution of relative random errors (RREs) was mapped based on the dataset in September 2016. Afterwards, the seasonal variations of the global distribution of RREs were studied. The global distribution of pseudo satellite measurements for a 16-day orbit repeat cycle showed relatively uniform distribution over the land of the northern hemisphere. The results demonstrated that 61.24% of the global RREs were smaller than 0.25%, or about 1 ppm, while 2.76% of the results were larger than 0.75%. The statistics reveal the future performance of the spaceborne IPDA lidar.

Abstract. A method is assessed which expands aerosol vertical profiles inferred from nadir-pointing lidars to cross-track locations next to nadir columns. This is achieved via matching of passive radiances at off-nadir locations with their counterparts that are collocated with lidar data. This spectral radiance matching (SRM) method is tested using profiles inferred from Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) lidar observations and collocated Moderate Resolution Imaging Spectroradiometer (MODIS) passive imagery for the periods 10–25 April and 14–29 September 2015. CALIPSO profiles are expanded out to 100 km on both sides of the daytime ground track. Reliability of constructed profiles that are removed from the ground track by number of kilometers are tested by requiring the algorithm to reconstruct profiles using only profiles that are removed from it along track by more than the number of kilometers. When sufficient numbers of pixels and columns are available, the SRM method can correctly match ∼75 % and ∼68 % of aerosol vertical structure at distances of 30 and 100 km from the ground track, respectively. The construction algorithm is applied to the eastern coast of Asia during spring 2015. Vertical distributions of different aerosol subtypes indicate that the region was dominated by dust and polluted dust transported from the continent. It is shown that atmospheric profiles and aerosol optical depth (AOD) inferred from ground-based measurements agree with those constructed by the SRM method. For profiles, the relative errors between those measured by ground-based lidar and those constructed in the surrounding area are similar to the relative errors between the ground-based station and CALIPSO overpass at the closest distance. For AOD, the measurements from the ground-based network agree with those inferred from constructed aerosol structure better than direct observations from CALIPSO and close to those inferred from MODIS radiances.

Aerosols and clouds greatly affect the Earth's radiation budget and global climate. Light detection and ranging (lidar) has been recognized as a promising active remote sensing technique for the vertical profiles of aerosols and clouds. China is developing its first space-borne aerosol-cloud high-spectral-resolution lidar (ACHSRL) for global high accuracy observations of aerosols/clouds profiles. This study presents a retrieval algorithm for aerosol and cloud optical properties from ACHSRL which was compared with the end-to-end Monte-Carlo simulations and validated with the data from an airborne flight with the ACHSRL prototype (A2P) instrument. Using imaging denoising, threshold discrimination, and iterative reconstruction methods, this algorithm was developed for calibration, feature detection, and extinction coefficient retrievals. The simulation results show that 95.4% of the backscatter coefficient have an error less than 12% while 95.4% of extinction coefficient have an error less than 24%. Cirrus and marine and urban aerosols were identified based on the airborne measurements over different surface types. Then, comparisons were made with U.S. Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) profiles, Moderate-resolution Imaging Spectroradiometer (MODIS), and the ground-based sun photometers. High correlations (R > 0.79) were found between backscatter (extinction) coefficient profiles of A2P and CALIOP over forest and town cover; the aerosol optical depth retrievals have correlation coefficient of 0.71 with MODIS data and show spatial variations consistent with those from the sun photometers. The algorithm developed for ACHSRL in this study can be directly employed for future space-borne high-spectral-resolution lidar (HSRL) and its data products will also supplement CALIOP data coverage for global observations of aerosol and cloud properties.

No abstract