The cyclic polymer topology strongly alters the interfacial, physico-chemical properties of polymer brushes, when compared to the linear counterparts. In this study, we especially concentrated on poly-2-ethyl-2-oxazoline (PEOXA) cyclic and linear grafts assembled on titanium oxide surfaces by the "grafting-to" technique. The smaller hydrodynamic radius of ring PEOXAs favors the formation of denser brushes with respect to linear analogs. Denser and more compact cyclic brushes generate a steric barrier that surpasses the typical entropic shield by a linear brush. This phenomenon, translates into an improved resistance towards biological contamination from different protein mixtures. Moreover, the enhancement of steric stabilization coupled to the intrinsic absence of chain ends by cyclic brushes, produce surfaces displaying a super-lubricating character when they are sheared against each other. All these topological effects pave the way for the application of cyclic brushes for surface functionalization, enabling the modulation of physico-chemical properties that could be just marginally tuned by applying linear grafts.

The era of poly(ethylene glycol) (PEG) brushes as a universal panacea for preventing non-specific protein adsorption and providing lubrication to surfaces is coming to an end. In the functionalization of medical devices and implants, in addition to preventing non-specific protein adsorption and cell adhesion, polymer-brush formulations are often required to generate highly lubricious films. Poly(2-alkyl-2-oxazoline) (PAOXA) brushes meet these requirements, and depending on their side-group composition, they can form films that match, and in some cases surpass, the bioinert and lubricious properties of PEG analogues. Poly(2-methyl-2-oxazine) (PMOZI) provides an additional enhancement of brush hydration and main-chain flexibility, leading to complete bioinertness and a further reduction in friction. These data redefine the combination of structural parameters necessary to design polymer-brush-based biointerfaces, identifying a novel, superior polymer formulation.

SignificanceShear thickening is a ubiquitous rheological phenomenon whereby dense suspensions of particles in a fluid exhibit a viscosity increase at high shear, which can turn into a viscosity divergence [discontinuous shear thickening (DST)]. Although macroscopically well characterized, the microscopic origin of DST is still debated, especially in connection to particle surface properties, e.g., roughness and friction. We elucidate here the mechanisms underpinning DST by carrying out nanotribological measurements of the interparticle contacts of model rough colloids. We demonstrate that rough particles exhibit DST over a broader range of shear rates and for volume fractions much lower than for smooth colloids, due to interlocking of surface asperities, showing that taking an engineering-tribology approach is a powerful way to tune DST.

The application of polymer “brushes”, with their unique physicochemical properties, has led to a radical change in the way we functionalize biomaterials or formulate hybrids; however, their attractive traits can be largely surpassed by applying different polymer topologies, beyond the simple linear chain. Cyclic and loop brushes provide enhanced steric stabilization, improved biopassivity, and lubrication compared to their linear analogues. Focusing on poly­(2-ethyl-2-oxazoline) (PEOXA), an emerging polymer in nanobiotechnology, we systematically investigate how topology effects determine the structure of PEOXA brushes and to what extent technologically relevant properties such as protein resistance, nanomechanics, and nanotribology can be tuned by varying brush topology. The highly compact structure of cyclic PEOXA brushes confers an augmented entropic barrier to the surface, efficiently hindering unspecific interactions with biomolecules. Moreover, the intrinsic absence of chain ends at the cyclic-brush interface prevents interdigitation when two identical polymer layers are sheared against each other, dramatically reducing friction. Loop PEOXA brushes present structural and interfacial characteristics that are intermediate between those of linear and cyclic brushes, which can be precisely tuned by varying the relative concentration of loops and tails within the assembly. Such topological control allows biopassivity to be progressively increased and friction to be tuned.

The availability of catalytic/reducing sites at metallic Cu0 sources during supplemental activator and reducing agent atom transfer radical polymerization (SARA ATRP) is regulated by the components of the polymerization mixture, including ligand (L), alkyl halide initiator (R–X), and CuII-based deactivator. Their contributions were analyzed by quantifying the dissolution of Cu species within a quartz crystal microbalance with dissipation (QCM-D), subjecting a Cu0-coated sensor to different polymerization mixtures. The control of catalyst diffusion from Cu0 was subsequently exploited to fabricate structured polymer brushes with diverse compositions, when ATRP was performed from surface-immobilized initiators in the presence of a Cu0 plate, placed at a determined distance (d) from the substrate. Surface-initiated ATRP in the presence of Cu0 (Cu0-SI-ATRP) is compatible with a broad variety of monomers, including oligo­(ethylene glycol) acrylate (OEGA), methyl acrylate (MA), and acrylamide (AAm). The kinetics of brush growth is finely tuned by the independent variation of d, polymerization time, and concentration of added deactivator. Modulation of these parameters allowed us to generate homopolymer and multiblock copolymer brush gradients featuring a variety of morphologies and controlled interfacial properties, with unprecedented spatial resolution over the brush structure.

Cyclic poly-2-ethyl-2-oxazoline (PEOXA) ligands for superparamagnetic Fe O nanoparticles (NPs) generate ultra-dense and highly compact shells, providing enhanced colloidal stability and bio-inertness in physiological media. When linear brush shells fail in providing colloidal stabilization to NPs, the cyclic ones assure long lasting dispersions. While the thermally induced dehydration of linear PEOXA shells cause irreversible aggregation of the NPs, the collapse and subsequent rehydration of similarly grafted cyclic brushes allow the full recovery of individually dispersed NPs. Although linear ligands are densely grafted onto Fe O cores, a small plasma protein such as bovine serum albumin (BSA) still physisorbs within their shells. In contrast, the impenetrable entropic shield provided by cyclic brushes efficiently prevents nonspecific interaction with proteins.

Surface-initiated Cu(0)-mediated controlled radical polymerization (Si-CuCRP) can be successfully applied to fabricate poly[(oligoethylene glycol)methyl ether methacrylate] (POEGMA) brushes in one pot, presenting a grafting-density gradient across the surface. This is achieved by continuously varying the distance (d) between a copper plate, used as a source of Cu species, and the initiator-functionalized substrate. X-ray photoelectron spectroscopy (XPS) analysis of monolayers of Cu Iselective ligands demonstrates that a higher concentration of activator species diffuses to the initiating substrate in areas closer to the copper plate, a progressive decrease in activator concentration being observed upon increasing the distance between the two surfaces. As confirmed by the SI-CuCRP kinetics measured at different positions along the gradient, radical-termination reactions between propagating chains limit the grafting density of POEGMA grafts where the diffusion of activators is favored (i.e., at d → 0). This effect decreases with increasing d, ultimately yielding a gradual variation of POEGMA grafting density across the substrate. We have investigated the influence of grafting-density variation across the gradient on the swelling of POEGMA brushes as well as on their nanomechanical and nanotribological properties, measured by a combination of variable angle spectroscopic ellipsometry (VASE), colloidal-probe atomic force microscopy (CP-AFM), and lateral force microscopy (LFM). The results of these tests highlight how loosely grafted POEGMA chains incorporating a substantial amount of water can be significantly deformed by a shearing AFM probe, exhibit relatively high friction, and generate friction-vs-load (F f −L) profiles that follow a sublinear trend described by a Johnson− Kendall−Roberts (JKR) modeltypical of deformable films of high surface energy. In contrast, more densely packed POEGMA brushes incorporate less solvent and display very low friction, with F f −L data following a linear progression according to Amontons' law.

Control of adhesion is a crucial aspect in the design of microelectromechanical and nanoelectromechanical devices. To understand the dependence of adhesion on nanometer-scale surface roughness, a roughness gradient has been employed. Monomodal roughness gradients were fabricated by means of silica nanoparticles (diameter ∼12 nm) to produce substrates with varying nanoparticle density. Pull-off force measurements on the gradients were performed using (polyethylene) colloidal-probe microscopy under perfluorodecalin, in order to restrict interactions to van der Waals forces. The influence of normal load on pull-off forces was studied and the measured forces compared with existing Hamaker-approximation-based models. We observe that adhesion force reaches a minimum value at an optimum particle density on the gradient sample, where the mean particle spacing becomes comparable with the diameter of the contact area with the polyethylene sphere. We also observe that the effect on adhesion of increasing the normal load depends on the roughness of the surface.