In recent years, helium ion microscopy has produced high resolution images with novel contrast mechanisms. However, when using any charged particle beam, one must consider the potential for sample damage. In this article, the authors will consider helium ion induced damage thresholds as compared to other more traditional charged-particle-beam technologies, as a function of dose, dose rate, and beam energy, and describe potential applications operating regimes.

No abstract

Optical trapping and manipulation of individually dissolved single-walled carbon nanotubes in an aqueous solution was demonstrated using an infrared laser trapping system. The trapping effect was attributed to the interaction between the electric field of the laser and the instantaneously induced dipole moments in individual nanotube molecules. Fluorescence microscopy and intensity measurements demonstrated that the amount of trapped nanotubes is dependent on the initial nanotube concentration, laser power, and irradiated volume of the laser beam. It was also demonstrated that an optical trap combined with a microfluidic device trapped and moved nanotubes in the fluid channel.

The success of the helium ion microscope has encouraged extensions of this technology to produce beams of other ion species. A review of the various candidate ion beams and their technical prospects suggest that a neon beam might be the most readily achieved. Such a neon beam would provide a sputtering yield that exceeds helium by an order of magnitude while still offering a theoretical probe size less than 1-nm. This article outlines the motivation for a neon gas field ion source, the expected performance through simulations, and provides an update of our experimental progress.

Semiconductor manufacturing technology nodes will evolve to the 22, 15, and 11 nm generations in the next few years. For semiconductor nanomachining applications, further beam spot size scaling is required beyond what is capable by present generation Ga+ focused ion beam technology. As a result, continued Ga+ beam scaling and/or alternative beam technology innovations will be required. In this work, several alternative ion beam technologies are explored and compared to Ga+ beam for key nanomachining and substrate interaction attributes. First, thorough Monte Carlo simulations were conducted with various ion species incident on silicon and copper. Additionally, silicon and copper substrates were experimentally exposed to ion beams of helium, neon, and gallium. These substrates were subsequently analyzed to determine the sputter yields and subsurface damage.

No abstract

Focused helium and neon ion (He(+)/Ne(+)) beam processing has recently been used to push resolution limits of direct-write nanoscale synthesis. The ubiquitous insertion of focused He(+)/Ne(+) beams as the next-generation nanofabrication tool-of-choice is currently limited by deleterious subsurface and peripheral damage induced by the energetic ions in the underlying substrate. The in situ mitigation of subsurface damage induced by He(+)/Ne(+) ion exposures in silicon via a synchronized infrared pulsed laser-assisted process is demonstrated. The pulsed laser assist provides highly localized in situ photothermal energy which reduces the implantation and defect concentration by greater than 90%. The laser-assisted exposure process is also shown to reduce peripheral defects in He(+) patterned graphene, which makes this process an attractive candidate for direct-write patterning of 2D materials. These results offer a necessary solution for the applicability of high-resolution direct-write nanoscale material processing via focused ion beams.

No abstract