No abstract

Water pollution is one of the major global challenges today. Water bodies are contaminated by the heavy release of waste effluents of textile industries, which includes intensively colored dye pollutants. Herein, a ternary nanocomposite of bismuth copper selenide with small particle size and ternary metal selenide (TMS)‐chitosan microspheres (TMS‐CM) of the spherical porous surface were successfully synthesized. SEM, XRD, EDX, FTIR, and UV/Vis spectrophotometry analysis revealed the structural and morphological characteristics of the newly synthesized nanocomposites. SEM imaging showed the average diameter of TMS nanoparticle to be 33 nm. The crystal size was calculated as 6.33 nm and crystalline structure as orthorhombic using XRD findings. EDX confirmed the presence of Bi, Cu, and Se in the ternary nanocomposite. The bandgap of 1.8 eV was calculated from Tauc's plot for the TMS nanocomposite. SEM confirmed the successful synthesis of spherical TMS‐CM microspheres of porous surface morphology with an average size of 885.6 μm. The presence of chitosan microspheres in the synthesis of TMS nanocomposite was identified by FTIR spectral analysis. Furthermore, highly efficient photocatalytic degradation (up to 95.4%) of ARS was achieved within 180 min at pH 4.0 using 0.5 g of TMS‐CM in sunlight. The first‐order kinetic model fitted well to the photocatalytic decontamination of ARS using TMS‐CM with a rate constant of 6.1x10−2 min−1. The TMS‐CM gave attractive results and high efficiency in photocatalytic degradation of ARS dye after reusing and regeneration of up to seven successive cycles. The newly synthesized nanophotocatalyst could be efficiently used for the decontamination of dye polluted water from textile industries.

Even in the 21st century, water contamination has been a big problem and industrial processes are to be blamed for polluted water supplies. The use of sunlight in the process of photocatalysis is an efficient way to purify wastewater. Composites of TiO2/activated carbon/two-dimensional selenides performed better than either of the individual material or binary composites for this application. A straightforward hydrothermal technique was employed in the synthesis of photocatalysts. The synthesized photocatalytic composites were verified with the help of UV-Visible spectroscopy, FTIR, XRD, and SEM. The heterostructures absorbed nearly all of the sun’s UV and visible light. These photons are then converted into usable reducing electrons and oxidizing species such as •O2 and OH• to decompose organic pollutants from industrial wastewater. Since there were additional pathways available for charge transfer along with several active edge sites, the composite photocatalysts are proven more active than individual TiO2 and 2D MoSe2 components. With the help of a cascade-driven mechanism of electrons, these channels can transmit more charges than single-component heterojunctions. The results provided a realistic method for developing photocatalyst composites powered by solar light for use in industrial wastewater treatment. Results of degradation of methylene blue suggest that the synthesized composites possess better photocatalytic activity. This enhanced photocatalytic activity is not limited to organic dyes. Other hazardous organic pollutants present in industrial wastewater can be decomposed by using this approach.

For a perfect fluid source, we have investigated the homothetic matter collineations (HMCs) of locally rotationally symmetric (LRS) Bianchi type V spacetimes. For degenerate energy–momentum tensor, two cases arise. In one case, the solution of HMC equations yields 11-dimensional algebra of HMCs while in the second case, we have infinite number of HMCs. When the energy–momentum tensor is non-degenerate, we have four cases, each giving five-dimensional algebra of HMCs. Some LRS Bianchi type V metrics are provided admitting HMCs.