In recent years, bulk metallic glasses (BMGs) have drawn much research attention and are shown to be of industrial interest due to their superior mechanical properties and resistance to corrosion. In spite of the interest in harnessing MG for microelectromechanical systems devices, there are limitations in manufacturing such micrometer‐scale structures. A novel approach for the fabrication of 3D MG structures using laser‐induced forward transfer (LIFT) is demonstrated. Inherent tremendous cooling rates associated with the metal LIFT process (≈1010 k s−1) make the formation of a variety of BMGs accessible, including also various binary compositions. In this work, it is demonstrated that LIFT printing of ZrPd‐based metallic glass microstructures can also be performed under ambient conditions. X‐ray diffraction analysis of the printed structures reveals > 95% of amorphous metal phase. Taking advantage of the properties of BMG, high quality printing of high aspect ratio BMG pillars, and microbridges are demonstrated. It is also shown how a composite, amorphous‐crystalline metal structure with a required configuration can be fabricated using multimaterial LIFT printing. The inherent high resolution of the method combined with the noncontact and multimaterial printing capacity makes LIFT a valuable additive manufacturing technique to produce metallic glass‐based devices.
Laser-induced forward transfer (LIFT) has been shown to be a useful technique for the manufacturing of micron-scale metal structures. LIFT is a high-resolution, non-contact digital printing method that can support the fabrication of complex shapes and multi-material structures in a single step under ambient conditions. However, LIFT printed metal structures often suffer from inferior mechanical, electrical, and thermal properties when compared to their bulk metal counterparts, and often are prone to enhanced chemical corrosion. This is due mostly to their non-compact structures, which have voids and inter-droplet delamination. In this paper, a theoretical framework together with experimental results of achievable compactness limits is presented for a variety of metals. It is demonstrated that compactness limits depend on material properties and jetting conditions. It is also shown how a specific choice of materials can yield compact structures, for example, when special alloys are chosen along with a suitable donor construct. The example of printed amorphous ZrPd is detailed. This study contributes to a better understanding of the limits of implementing LIFT for the fabrication of metal structures, and how to possibly overcome some of these limitations.
Laser‐induced forward transfer (LIFT) is an additive manufacturing technique where short laser pulses are focused through a transparent substrate onto a thin, uniform, metal layer jetting micrometer‐scale droplets yielding high‐resolution 3D metal structures. Herein, LIFT printing from multilayered metal donors, and from compositional metal mixtures, is explored and presented. A comprehensive study of this sort has been lacking so far. LIFT printing from Cu–Ag structured donors is thoroughly studied. X‐ray diffraction (XRD) analysis reveals the formation of a metastable Cu–Ag phase reflecting the high cooling rate of the metal droplets. Tuning properties of the printed metal structures is made possible by controlling the pulse width and the donor layers’ properties. Longer pulses (10 ns) jetting from cosputtered donors yield better homogeneity than shorter pulses (1 ns) from donors made of distinct sputtered layers. These homogenic structures also display better resistance to chemical etching. This study opens the door to designing various phases and structures with different electrical and mechanical properties by using LIFT of multimaterials donors.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.